Search

Search type
200 products found
  • 200A Canadian Red Sunrise Globe "Made in USA" - G25

    This is a used original old red sunrise logo globe "Made in U.S.A." for Canadian lanterns. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

    May have slight rust stains that can be cleaned off around top edges - Logo's may have slight color differences.

    0.0
    Add first review
    Not rated yet
    • $85.00
    Sorry, we only have 2 of that item available
  • Check Valve Removal Tool, Universal - R701

    This tool has both a wide and slim slot for almost all check valves and makes changing check valves very easy - will only take a few minutes if used properly.

    C001 Check Valve: This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date.  
    R425 Check Valve: This is the earlier larger style check valve as used on the L227, L427, 220B, 228B, 220C, 228C, 235 lanterns, some lamps, and some early stoves. 

    0.0
    Add first review
    Not rated yet
    • $81.00
    Sorry, we only have 73 of that item available
  • 220 Frosted Sunrise Globe - G300

    New frosted sunrise logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Also known as part number 2000026613.

    0.0
    Add first review
    Not rated yet
    • $65.00
    Sorry, we only have 1 of that item available
  • 220 Frosted Batman Globe - G301

    New frosted Batman globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Also known as part number 2000026613.

    0.0
    Add first review
    Not rated yet
    • $65.00
    Sorry, we only have 2 of that item available
  • 220 Half Frosted Globe - G302

    New half frosted globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Also known as part number 2000026613.

    0.0
    Add first review
    Not rated yet
    • $65.00
    Sorry, we only have 2 of that item available
  • 200 Lantern Reflector - LR5

    Original Coleman Lantern Reflector, will only fit on 200's.

    0.0
    Add first review
    Not rated yet
    • $60.00
    Sorry, we only have 1 of that item available
    • New!

    440 Mica Globe - G12

    This is a reproduction mica globe for the smaller single mantle lanterns. This will fit on the 200, 200A, 234, 243, 241, 242, 246, 247, and 249 lanterns. It will also fit on any lantern that would take a 440 size globe. It is 4 1/4 inches tall and has a diameter of 3 1/2 inches. The craftsmanship is nice and it is like the old mica globes that went into the first lanterns. Mica is a mineral. It may have variations in clarity, small spots, light scratches or other natural discolorations.

    0.0
    Add first review
    Not rated yet
    • $48.00
    Sorry, we only have 8 of that item available
    • New!

    Carry Case Adapter Puck, Used - E1538

    Fits into the large yellow clam shell case converting it to carry a 200A lantern. If you put a 200A into one of the large cases it just flops around without the adapter.

    0.0
    Add first review
    Not rated yet
    • $45.00
    Sorry, we only have 1 of that item available
  • Valve Assembly, Used - E1356

    Used valve assembly for the models 242 through 242C lantern also 243 & 243A. We have not done any repair work to these at all. We will check to make sure the tip cleaner lever moves as it should and the eccentric block goes up and down.

    New valve stem packing has been installed.

    This will also work on the 200A lanterns. The difference is that the original valve wheel comes off with the 200s and the original valve wheel does not come off on the 242s. If you don't care about the valve wheel, these will work for the 200 models.

    0.0
    Add first review
    Not rated yet
    • $42.00
    Sorry, we only have 23 of that item available
    • New!

    Carry Case Red - CC4

    Used red carry case for models 200A, 288, 286, 290, 290A, 295, 220 F-K, 321, 327, 427 and Quick-Lite Lanterns.

    Latches work great.


    0.0
    Add first review
    Not rated yet
    • $40.00
    Sorry, we only have 1 of that item available
  • 200 Fount, Used - U901

    This is a used fount for the 200A lantern dated 6-76. This fount as a couple paint chipping/scuffs, overall great condition (see photos)

    0.0
    Add first review
    Not rated yet
    • $40.00
    Sorry, we only have 1 of that item available
  • 200 Vent Tall Used - U852

    Used tall style vent for the 200/200A lanterns.

    This one has some scratches and paint chipping (see photos)

    0.0
    Add first review
    Not rated yet
    • $36.00
    Sorry, we only have 1 of that item available
  • Valve Assembly, Used - E1642

    Used valve assembly for the models 242 through 242C lantern also 243 & 243A. We have not done any repair work to these at all. We will check to make sure the tip cleaner lever moves as it should and the eccentric block goes up and down.

    Valve stem packing has not been changed but one will be included for you to change if needed.

    This will also work on the 200A lanterns. The difference is that the original valve wheel comes off with the 200s and the original valve wheel does not come off on the 242s. If you don't care about the valve wheel, these will work for the 200 models.

    0.0
    Add first review
    Not rated yet
    • $36.00
    Sorry, we only have 13 of that item available
    • New!

    200 Vent Tall, Used - U850

    This is a used tall style vent for the 200 and 200A Lantern. 

    Has some paint chips (see photos)

    0.0
    Add first review
    Not rated yet
    • $35.00
    Sorry, we only have 1 of that item available
  • Cooler Tray, New - E2005

    New cooler tray. This tray measures approximately 9" X 11-9/16" and is 2-3/4 inches deep. Has some yellowing from age but is in good shape with no cracks or holes.

    These fit in cooler models: 5252, 5253,  5252B, 5252C, 5253A, 5279, 5280, 5280A, 5285, 5285A, 5285B, 5283A, 5284, 5284A, 5284B, 5281, 5282

    0.0
    Add first review
    Not rated yet
    • $35.00
    Sorry, we only have 1 of that item available
  • Ice Tub, Used - E2002

    Used ice tub for the older steel belted coolers. 10.3/4" tall, 10" wide 13" long. No cracks or holes. Good shape.

    Fits models: 5254D, E F, 5255D, E, F, 5256D, E, and F

    0.0
    Add first review
    Not rated yet
    • $35.00
    Sorry, we only have 3 of that item available
  • 200 Vent Tall, Used - U853

    Used tall style vent for 200/200A lanterns made in 1962 and before. This vent has some rust and chippings (see photos). 

    0.0
    Add first review
    Not rated yet
    • $35.00
    Sorry, we only have 1 of that item available
  • Leather Pump Cup - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞 - S81

    This is a 10 PACK of the common Coleman pump cup that fits most lanterns and stoves.

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    0.0
    Add first review
    Not rated yet
    • $34.65
    Sorry, we only have 757 of that item available
  • Used 200A Valve Assembly - U822

    Used valve assembly for 200 and 200A lanterns. In good condition. Valve stem packing has not been changed but one will be included for you to change if needed.

    This will also work on the 242b & 242c lanterns. The difference is that the original valve wheel comes off with the 200s and the original valve wheel does not come off on the 242s. If you don't care about the valve wheel, these will work for the 242 models.

    0.0
    Add first review
    Not rated yet
    • $34.00
    Sorry, we only have 23 of that item available
  • Rebuild Kit - 200 & 200A Lanterns - K10

    Rebuild kit for both the 200 and 200A lanterns. Cures most troubles.

    Includes:

    • 4 Coleman string tie mantles for the 200 or 200A lantern
    • 1 Reproduction Generator for the 200 or 200A lantern
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 2 Cap Gaskets - for the bottom of your fuel cap. 1 each of the two possible types needed

    See Diagram in "Description" under photo at bottom left of this page

    More parts for: 

    0.0
    Add first review
    Not rated yet
    • $32.70
    Sorry, we only have 60 of that item available
  • Rebuild Kit - 200 & 200A Lanterns - K08

    Rebuild kit for both the 200 and 200A lanterns. Cures most troubles.

    Includes:

    • 4 Peerless string tie mantles for the 200 or 200A lantern
    • 1 Reproduction Generator for the 200 or 200A lantern
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 2 Cap Gaskets - for the bottom of your fuel cap. 1 each of the two possible types needed

    See Diagram in "Description" under photo at bottom left of this page

    More parts for: 

    0.0
    Add first review
    Not rated yet
    • $32.20
    Sorry, we only have 425 of that item available
    • New!

    200 Vent Short, Used - U855

    Used short style vent for the 200/200A lanterns. 

    This vent has some scuffs/scratches and a little paint chipping (see photos). 

    0.0
    Add first review
    Not rated yet
    • $32.00
    Sorry, we only have 1 of that item available
  • 200 Vent Short, Used - U854

    Used short style vent for 200/200A lanterns. This vent has some paint chipping (see photos)

    0.0
    Add first review
    Not rated yet
    • $32.00
    Sorry, we only have 1 of that item available
    • New!

    200 Vent Short, Used - U856

    Used short style vent for the 200/200A lanterns. Has a few scratches/scuffs, and small dent on the outer rim with a paint chip (see photos).

    0.0
    Add first review
    Not rated yet
    • $32.00
    Sorry, we only have 1 of that item available
  • Large Valve Stem Packing - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞- P01

    This is a 10 PACK - Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    0.0
    Add first review
    Not rated yet
    • $31.95
    Sorry, we only have 164 of that item available
  • Midstate Lamp Globe Frosted #1304 - G200

    This is a globe for the Midstate model #1200 lamp.


    0.0
    Add first review
    Not rated yet
    • $30.00
    Only 1 left in stock
    Sorry, we only have 1 of that item available
  • Burner Frame Stainless - R350

    This is a reproduction stainless steel burner frame for the model 202. It will also work on all models  200, 200A, 201, 202, 5101, 5121 and 5122 lanterns.

    5.0
    Score: 5.0 (votes: 2)
    Reviews: 2
    • $28.40
    Sorry, we only have 30 of that item available
  • Valve Stem, 200A, NOS - E1007

    New NOS valve stem for the model 200A lantern.

    0.0
    Add first review
    Not rated yet
    • $28.00
    Sorry, we only have 28 of that item available
  • 200A Vent Short, Used - U857

    Used short style vent for the 200/200A lanterns made in 1963 and after.

    This vent has some scratches/scuffs and paint chippings (shown in photos) 

    0.0
    Add first review
    Not rated yet
    • $28.00
    Sorry, we only have 1 of that item available
  • Valve Assembly - C071

    Valve assembly for Northstar Lantern.

    0.0
    Add first review
    Not rated yet
    • $26.65
    Sorry, we only have 8 of that item available
  • 3 Piece Filler Cap, New Reproduction - S06

    This is a new, reproduction 3 piece cap. Excellent craftsmanship. This is not the type with a hole in the side.

    0.0
    Add first review
    Not rated yet
    • $26.50
    Sorry, we only have 12 of that item available
  • Ei Module - C046

    Ei Module For Northstar 2000A Lantern

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $28.75
    Sorry, we only have 14 of that item available
  • 286 Valve Assembly - C056

    This will fit all 286 model lanterns.

    0.0
    Add first review
    Not rated yet
    • $25.85
    Sorry, we only have 6 of that item available
  • 200 Fount, Used - U902

    This is a used fount for the 200A lantern dated 9-60. Has some scratches/paint chipping and a dent by the pump assembly (see photos)

    0.0
    Add first review
    Not rated yet
    • $25.00
    Sorry, we only have 1 of that item available
  • Mica Globe Panels - E1120

    These mica panels are 3" x 5" in size.

    General information:

    • Mica can be cut with sharp scissors or a good paper cutter
    • This is the only size that is available
    • Mica is a natural product that is mined from the earth and will have slight variations in clarity, thickness, lines and light scratches.
    • Mica is not available in amber or red.
    • Mica can withstand temperatures up to 1800 degrees F.
    • These are only sold in a package of 5 panels.
    0.0
    Add first review
    Not rated yet
    • $25.00
    Sorry, we only have 17 of that item available
  • Ice Tray, Used - E2000

    Cooler ice tray - have some yellowing from age. 13" long and 10" wide. These are solid and have no holes or cracks.

    Fits models: 5254D, E F, 5255D, E, F, 5256D, E, and F

    0.0
    Add first review
    Not rated yet
    • $25.00
    Sorry, we only have 1 of that item available
    • New!

    200 Fount, Used - U900

    This is a used fount for the 200A lantern dated 10-65. This fount has some paint chipping and scratches/scuffs (see photos).

    0.0
    Add first review
    Not rated yet
    • $25.00
    Sorry, we only have 1 of that item available
  • Propane Regulator, NOS - E1637

    New Old Stock Propane Regulator. Please see the photo of the tip to make sure it looks like yours. Will not fit the 5430-700 model. Package says it fits most Coleman Propane Stoves, Grill/Stoves and Fold N Go Stoves. Would recommend you find your stove model, get the diagram and verify the part number is right for your application.

    0.0
    Add first review
    Not rated yet
    • $24.50
    Only 1 left in stock
    Sorry, we only have 1 of that item available
  • Coleman Ceramic Burner Cap, Used - E1417

    Used Coleman ceramic burner cap for the 242 and 200A series lanterns. Has "COLEMAN" written on it 

    They all will vary in wear but will all be in one piece.

    0.0
    Add first review
    Not rated yet
    • $24.00
    Sorry, we only have 2 of that item available
  • Generator, New - 282/285 - C012

    This is a new Coleman made generator for lantern models 282 and 285. Includes a new gas tip, spring, and tip cleaning wire.
    Also known as part number 3000005622.

    0.0
    Add first review
    Not rated yet
    • $23.15
    Sorry, we only have 51 of that item available
  • 200A Fuel Tube Reproduction - R304

    Reproduction fuel tube for the model 200, 202 and 242 series lanterns. Also fits the 530 stove.

    0.0
    Add first review
    Not rated yet
    • $23.75
    Sorry, we only have 14 of that item available
  • Bail Handle - R310

    Reproduction stainless steel bail handle for the models 202, 200, and 200A.


    0.0
    Add first review
    Not rated yet
    • $21.20
    Sorry, we only have 26 of that item available
  • 200A Reproduction Burner Frame - R353

    This is a new reproduction frame for burner frame for the models 200, 200A, 201, 202, 5101, 5121 and 5122 lanterns.

    0.0
    Add first review
    Not rated yet
    • $22.80
    Sorry, we only have 185 of that item available
  • Generator, 286/288 - C007

    This is a new Coleman made generator for lantern models 200B, 286 & 288. Generator includes new gas tip, spring, and tip cleaning wire.
    This part is also known as part number 3000005403.

    0.0
    Add first review
    Not rated yet
    • $19.45
    Sorry, we only have 65 of that item available
  • Generator/Northstar - C049

    Generator For Northstar Lantern 2000-750T 2000-750 2000-750E 2000A750. New generator includes new gas tip, spring, and tip cleaning wire.


    Also known as part number 3000005096.






    0.0
    Add first review
    Not rated yet
    • $21.55
    Sorry, we only have 21 of that item available
  • Generator for 200/242, Reproduction - R200

    Reproduction Generator for 200, 200A, 202, 242, 243, 243A & Similar Sears Lanterns. New generator includes new gas tip, spring, and tip cleaning wire. The generator is complete and you need nothing else for the install.
    Same as the old part numbers T66, 200A2891 and 3000005089.

    0.0
    Add first review
    Not rated yet
    • $18.80
    Sorry, we only have 425 of that item available
  • 200A Globe Clear - G01

    New Coleman made Globe. It will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

    Also known as part number R690B051.

    0.0
    Add first review
    Not rated yet
    • $18.45
    Sorry, we only have 199 of that item available
  • Valve Wheel Black, Old Style, NOS - E1679

    This is a NOS old style black valve wheel for 200A, 202, 220D, 220E and 220F, and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. May have some minor scratches from sitting around all these years.

    0.0
    Add first review
    Not rated yet
    • $18.00
    Sorry, we only have 14 of that item available
Products: 150 of 200
Show:50

Footer navigation