Search

Search type
344 products found
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a bolt in the center then these gaskets will work. 

    Red 3 piece filler cap shown for demonstration purposes only.

    5.0
    Score: 5.0 (votes: 3)
    Reviews: 2
    • $1.30
    Sorry, we only have 10480 of that item available
  • Peerless Mantles 2C-HG - M01

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    5.0
    Score: 5.0 (votes: 3)
    Reviews: 3
    • $6.90
    Sorry, we only have 562 of that item available
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    3.3
    Score: 3.3 (votes: 3)
    Reviews: 3
    • $3.85
    Sorry, we only have 7581 of that item available
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one-piece filler caps. If your filler cap looks like the one pictured, then this gasket is the correct one. If your filler cap has a screw in the center of it, then this gasket will not work. The red filler cap is shown for illustration purposes only and is not included.

    Also known as part number 425A1361

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $1.35
    Sorry, we only have 2930 of that item available
  • Generator Tube Packing - P05

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    0.0
    Add first review
    Not rated yet
    • $2.55
    Sorry, we only have 605 of that item available
  • Check Valve With Stem - C001

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. These are the updated design that uses a smaller head on the air stem. You won't need your current air stem any more as this comes with a new one that is updated and replaces your old one. 

     If your part diagram calls for the 242B5381 or a 621-5361 check valve, then this would be the correct part. It is also known as part number 2006381ZCL.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $12.80
    Sorry, we only have 493 of that item available
  • Peerless Mantles 24-A - M04

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $4.10
    Sorry, we only have 388 of that item available
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $3.55
    Sorry, we only have 1663 of that item available
  • Peerless Mantles 111 - M05

    These Peerless mantles are the same size as Coleman #11 or #1111 mantles. Made in India. For lantern model numbers: 206, 236, 237, 333, 555, 621, 625, 635, and 639. These are the larger mantles, suitable for 500 candlepower lanterns. 

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $3.70
    Sorry, we only have 197 of that item available
    • Free Shipping

    Decal - Fits 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns - D11

    White Border Logo with "Reg.", & "Lantern". For 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns. Also fits 502 stove and the 335, 236A, 237A Lanterns.



    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $3.55
    Sorry, we only have 1199 of that item available
    • Free Shipping

    427 Cap Gasket - S54

    This gasket is for the model 227, 427, 220/228 Slant lanterns, most winged style fuel caps, early 220B's, and other similar lanterns and lamps that have the older style cap insert.

    It is the same outside diameter as the common three piece cap gasket but has a smaller inside hole. 

    Old part number 115-1361. 

    This will not seal they typical Coleman lantern cap.

    0.0
    Add first review
    Not rated yet
    • $1.55
    Sorry, we only have 826 of that item available
  • Mantle String Tie #21 4 Pack - M02

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004344.

    0.0
    Add first review
    Not rated yet
    • $7.45
    Sorry, we only have 62 of that item available
    • Free Shipping

    Decal - Fits 1965 to 1971 200A, 220 & 228 F Lanterns - D12

    White Border Logo with "Reg.", "Pats. Pending" & "Lantern" for1965  to 1971 200A, 220 & 228 F Lanterns. Also fits the 220G, 

    0.0
    Add first review
    Not rated yet
    • $3.55
    Sorry, we only have 960 of that item available
  • Generator, 286/288 - C007

    This is a new Coleman made generator for lantern models 200B, 286 & 288. Generator includes new gas tip, spring, and tip cleaning wire.
    This part is also known as part number 3000005403.

    0.0
    Add first review
    Not rated yet
    • $19.45
    Sorry, we only have 69 of that item available
    • Free Shipping

    Burner Screen - S29

    This replacement screen will fit the burner caps used on 242 and 200/200A model lanterns.

    0.0
    Add first review
    Not rated yet
    • $2.05
    Sorry, we only have 214 of that item available
  • Filler Cap, Brass - C004

    This is a new brass one piece filler cap made by Coleman. Comes with a new gasket and will fit most all lanterns and stoves other than the model 242 lantern and 500 stove that have the smaller filler caps. 

    It is also known as part number 425A1405.

    0.0
    Add first review
    Not rated yet
    • $9.60
    Sorry, we only have 374 of that item available
    • New!

    Leather Pump Cup Kit - C005

    This is a new leather pump cup, push on nut and back-up plate. This will fit most all lanterns and stoves. If converting from a rubber pump cup, make sure you use the new back up plate in this kit.

    Also known as part number 3000005094.

    0.0
    Add first review
    Not rated yet
    • $6.45
    Sorry, we only have 272 of that item available
  • Spark Igniter - E1273

    New Coleman made Spark Igniter. Comes in new packaging with instructions.

    0.0
    Add first review
    Not rated yet
    • $15.45
    Sorry, we only have 1378 of that item available
  • Filler Cap Screw 220 Size - S68

    Stainless steel filler cap screw for the 3 piece filler caps used on the 200A, 220B, 220C, 220D, 220E, 220F, 427 and similar sized filler caps.

    Fits the cap number: 220C1401

    0.0
    Add first review
    Not rated yet
    • $1.10
    Sorry, we only have 920 of that item available
    • Free Shipping

    220 Burner Screen - S30

    Burner screen for the model 220 and 228 lanterns. Fits most double mantle lanterns and lamps with small burner caps.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $2.05
    Sorry, we only have 185 of that item available
  • Burner Cap - 200/242 - C009

    This is a new Coleman made burner cap for the the 200, 200A, 202, 243, 242  and 247 lanterns. Also fits a few lamps and Sears lanterns.
    Also known as part number 2423231.

    0.0
    Add first review
    Not rated yet
    • $6.60
    Sorry, we only have 94 of that item available
  • Schrader Valve Core - R510

    These are new fuel rated valve cores and will fit the 214, 275, 275A, 285, 286, 288, 288A, 290, 290A lanterns and also the 400, 400A and 508 stoves.
    These will function for Off/On in the following stoves, but may not allow full flame control, particularly at the low end of flame adjustment: 400B, 440, 442, 3024, 508A and 533.

    Need more information on the valve core? Click HERE.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $5.15
    Sorry, we only have 469 of that item available
    • Free Shipping

    Check Valve O Ring - S20

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    0.0
    Add first review
    Not rated yet
    • $1.15
    Sorry, we only have 2400 of that item available
  • Pump Assembly, Universal - C006

    This is a replacement pump assembly, made by Coleman for most stoves and lanterns except for the small Peak 1 type products that have a shorter pump rod.
    This pump comes with the neoprene pump cup and has parts you can exchange to match your existing type.


    0.0
    Add first review
    Not rated yet
    • $10.41
    Sorry, we only have 47 of that item available
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004345.


    0.0
    Add first review
    Not rated yet
    • $4.95
    Sorry, we only have 268 of that item available
  • Generator for 201/241/247 - C022

    New Generator for 201, 241 and 247 Kerosene Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.
    Also known as part number 242K289, 201B5891 and 3000005402.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $24.60
    Sorry, we only have 69 of that item available
  • Valve Wheel Screw - S77

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-059 is needed.

    0.0
    Add first review
    Not rated yet
    • $1.00
    Sorry, we only have 620 of that item available
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $5.75
    Sorry, we only have 483 of that item available
  • Pal Nut - S67

    Pal nut for the 200, 200A, 201 and 202 lanterns. Also used on some stoves.

    Need the washers for under a 200 or 200A frame? Look HERE.


    0.0
    Add first review
    Not rated yet
    • $1.10
    Sorry, we only have 333 of that item available
    • Free Shipping

    Decal - Fits 1954 to 1960 200A Lanterns - D14

    Yellow Border Logo Used on Coleman 200A Lanterns 1954 to 1960 "Reg."

    0.0
    Add first review
    Not rated yet
    • $3.55
    Sorry, we only have 550 of that item available
  • Pump Cup, Neoprene - C019

    This is a new Coleman made replacement pump cup  for all lanterns that came with the rubber style.

    0.0
    Add first review
    Not rated yet
    • $3.55
    Sorry, we only have 165 of that item available
    • Free Shipping

    Pump Clip, Used - S100

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 75 of that item available
  • Pump Screw - S70

    This is the smaller sheet metal style screw used on the 202, 220/228D, 220/228E, and early 200A lanterns. It is not the one for the 242 series lanterns. Much too small for the 242 series lanterns. Also known as part number 530-452.

    0.0
    Add first review
    Not rated yet
    • $0.50
    Sorry, we only have 288 of that item available
  • Alcohol Bottle, 2 oz. - C020

    This is a new 2 oz. alcohol bottle for kerosene lanterns. Typically used to fill up the pre-heater cup before lighting.

    0.0
    Add first review
    Not rated yet
    • $7.95
    Sorry, we only have 26 of that item available
  • String Tie #11 Mantle - M07

    #11 mantles 2 pack For lantern model numbers: 206, 236, 237, 333, 555, 621, 625, 635, and 639. These are the larger mantles.

    0.0
    Add first review
    Not rated yet
    • $4.85
    Sorry, we only have 66 of that item available
  • Pre-Heater Cup, Small - C016

    Smaller size pre-heater cup for the 201 lantern. Is 1 inch in diameter and the center hole can accommodate a maximum of 5/16".

    0.0
    Add first review
    Not rated yet
    • $10.05
    Sorry, we only have 58 of that item available
  • Ball Nut, 2 Pack - C011

    These are a new Coleman made 2 pack of ball nuts. This is the common sized ball nut used on most Coleman lanterns.
    Also known as part number 3000005384.

    0.0
    Add first review
    Not rated yet
    • $5.85
    Sorry, we only have 223 of that item available
    • Free Shipping

    Decal - Fits 1952 & 1953 200A Lanterns - D16

    Yellow Border Logo Used on Coleman 200A Lanterns 1952 - 1953

    0.0
    Add first review
    Not rated yet
    • $3.55
    Sorry, we only have 164 of that item available
  • Generator R55 - C026

    Fits models Air O lantern, 327, 427, Slant 220 lanterns and CQ lamps

    0.0
    Add first review
    Not rated yet
    • $48.30
    Sorry, we only have 15 of that item available
  • Generator for 200/242, Reproduction - R200

    Reproduction Generator for 200, 200A, 202, 242, 243, 243A & Similar Sears Lanterns. New generator includes new gas tip, spring, and tip cleaning wire. The generator is complete and you need nothing else for the install.
    Same as the old part numbers T66, 200A2891 and 3000005089.

    0.0
    Add first review
    Not rated yet
    • $18.80
    Sorry, we only have 428 of that item available
    • Free Shipping

    Decal 201 Kerosene - D15

    Coleman Logo For Model 201 Kerosene Lantern

    0.0
    Add first review
    Not rated yet
    • $3.55
    Sorry, we only have 105 of that item available
  • 200 Burner Frame Washer Kit - K14

    These come in a pair of 2. They are new stainless steel washers that go under the burner frame on all 200 and 242 lanterns. Identical size as the originals.

    New 200 burner frame Pal Nut is HERE.

    New 200 burner frame Nut is HERE.

    0.0
    Add first review
    Not rated yet
    • $2.05
    Sorry, we only have 3782 of that item available
  • Generator Nut, Used - S105

    Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 142 of that item available
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    0.0
    Add first review
    Not rated yet
    • $9.95
    Sorry, we only have 135 of that item available
  • Ball Nut, Used - S101

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    0.0
    Add first review
    Not rated yet
    • $3.00
    Sorry, we only have 17 of that item available
  • Air Tube Screw - S72

    Screw for tip cleaner assembly to air intake tube. Flat head screwdriver type used on earlier 220/228 models.

    0.0
    Add first review
    Not rated yet
    • $0.25
    Sorry, we only have 482 of that item available
Products: 150 of 344
Show:50

Footer navigation