Search

Search type
77 products found
  • Check Valve With Stem - C001

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. These are the updated design that uses a smaller head on the air stem. You won't need your current air stem any more as this comes with a new one that is updated and replaces your old one. 

     If your part diagram calls for the 242B5381 or a 621-5361 check valve, then this would be the correct part. It is also known as part number 2006381ZCL.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $12.80
    Sorry, we only have 489 of that item available
  • Schrader Valve Core - R510

    These are new fuel rated valve cores and will fit the 214, 275, 275A, 285, 286, 288, 288A, 290, 290A lanterns and also the 400, 400A and 508 stoves.
    These will function for Off/On in the following stoves, but may not allow full flame control, particularly at the low end of flame adjustment: 400B, 440, 442, 3024, 508A and 533.

    Need more information on the valve core? Click HERE.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $5.15
    Sorry, we only have 469 of that item available
  • Peerless Mantles 2C-HG - M01

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    5.0
    Score: 5.0 (votes: 3)
    Reviews: 3
    • $6.90
    Sorry, we only have 554 of that item available
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    3.3
    Score: 3.3 (votes: 3)
    Reviews: 3
    • $3.85
    Sorry, we only have 7573 of that item available
  • Pump Assy Leather Used Push On Nut - U811

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 12 of that item available
  • Coleman Filter Funnel - C024

    New Filter Funnel For Lamps And Stoves. 

    Stops filling your lantern or stove at the correct level.

    0.0
    Add first review
    Not rated yet
    • $12.45
    Sorry, we only have 21 of that item available
  • Pump Assembly Plastic Cap, Used - E1426

    Used pump assembly with plastic cap, works on the newer stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 13 of that item available
  • Mantles, Insta-Clip #21, 2 pack - M12

    Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. 

    These simply slide on and you cross the wires instead of tying strings - very quick to install.

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    0.0
    Add first review
    Not rated yet
    • $4.05
    Sorry, we only have 62 of that item available
  • Mantle Insta-Clip 2 #21 2 pack - M13

    Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    0.0
    Add first review
    Not rated yet
    • $4.95
    Sorry, we only have 69 of that item available
  • Sparker Flints Zippo - R508

    Zippo brand Flints for the Coleman Lantern Spark Igniter.

    0.0
    Add first review
    Not rated yet
    • $4.60
    Sorry, we only have 80 of that item available
  • Filler Cap Steel, Used - E1386

    Used steel filler cap for Coleman lanterns. All will vary in wear.

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $11.00
    Sorry, we only have 5 of that item available
    • Free Shipping

    Check Valve O Ring - S20

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    0.0
    Add first review
    Not rated yet
    • $1.15
    Sorry, we only have 2395 of that item available
  • Pump Assembly, Universal - C045

    Universal pump assembly with a leather cup that fits almost all Coleman lanterns and stoves. 

    Does not fit the small Peak 1 lanterns or stoves, and also some older style pumps found on QuickLites and similar lanterns/stoves where the pump cap does not have the clip that holds it onto the fount. Replaces part number 242D5201

    0.0
    Add first review
    Not rated yet
    • $13.35
    Sorry, we only have 74 of that item available
  • Filler Cap 3 Piece Yellow Used - E1040

    This is for one used 3 piece yellow filler cap. 

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 2 of that item available
    • 3% less

    Used Pump Assembly Spring - S120

    Used Pump Assembly Spring

    Spring ONLY

    0.0
    Add first review
    Not rated yet
      • 3% less
      Market price:$3.35 you save $0.10
    • $3.25
    Sorry, we only have 155 of that item available
  • Used Square Nut - E1406

    This is a used pump square nut.

    Comes with one square nut ONLY.

    0.0
    Add first review
    Not rated yet
    • $1.75
    Sorry, we only have 192 of that item available
  • NOS Metal Pump Cap - E1405

    NOS metal pump cap for pump assembly. Does not come with whole assembly - just the top exterior metal cap is included.

    0.0
    Add first review
    Not rated yet
    • $2.50
    Sorry, we only have 131 of that item available
  • Pump Assembly Neoprene Used - E1561

    Used pump assembly for most stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    0.0
    Add first review
    Not rated yet
    • $7.00
    Sorry, we only have 5 of that item available
  • 285/286/288 Generator Reproduction - R208

    Reproduction Generator for Models 282, 286 & 288. New generator includes new gas tip, spring, and tip cleaning wire. 

    0.0
    Add first review
    Not rated yet
    • $18.40
    Sorry, we only have 2 of that item available
  • Filler Cap Dark Green Used - E1431

    This is a used one-piece filler cap that is the darker green used on 288 and similar lanterns. Paint may be chipped or scratched; each one will vary in wear. Comes with one new gasket for you to install if needed.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 23 of that item available
  • Leather Pump Cup - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞 - S81

    This is a 10 PACK of the common Coleman pump cup that fits most lanterns and stoves.

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    0.0
    Add first review
    Not rated yet
    • $34.65
    Sorry, we only have 757 of that item available
  • Filler Cap 3 Piece Green Used - U802

    This is a used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by picking out the ones in best shape first.

    We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.

    Comes with a new gasket for you to install if needed.

    0.0
    Add first review
    Not rated yet
    • $13.00
    Sorry, we only have 5 of that item available
  • Metal Funnel Small - R503

    This is a new metal filler funnel. Small and easy to pack. See its size in the last photos where it is being used on a fount. Works well for standard sized filler caps. Will not work for the smaller filler caps on models 242, 243, 247, 249 lanterns with the smaller cap or the 500 stove.

    0.0
    Add first review
    Not rated yet
    • $5.50
    Sorry, we only have 89 of that item available
  • Burner Assembly 286, Brass - E1270

    New burner assembly for the model 286 lantern. The burner tube is brass. 


    0.0
    Add first review
    Not rated yet
    • $34.00
    Sorry, we only have 9 of that item available
  • Generator Nut, Reproduction - S168

    Used Generator nut for the model 214, 222, 229, 286, 288 290, 635 and 639 lanterns.

    0.0
    Add first review
    Not rated yet
    • $5.50
    Sorry, we only have 2 of that item available
  • Filler Cap Nickel, Used - E1597

    Used nickel plated one piece cap. All will vary in wear.

    Fits most lanterns and stoves except for the model 242 lantern and model 500 stove.  

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 9 of that item available
  • Bail Wrap Protector Clear - R512

    This is 12 inches of new clear plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.

    0.0
    Add first review
    Not rated yet
    • $1.50
    Sorry, we only have 126 of that item available
  • Bail Wrap Protector Black - R513

    This is 12 inches of new black plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.

    0.0
    Add first review
    Not rated yet
    • $1.50
    Sorry, we only have 14 of that item available
  • Filler Cap Silver Used - E1385

    This is a used one piece filler cap. Paint may be chipped or missing andwill vary in wear. Silver in color. Includes a new gasket for you to install.

    0.0
    Add first review
    Not rated yet
    • $11.50
    Sorry, we only have 1 of that item available
  • Gas Bottle, 8 oz. - R321

    This is a new 8 oz. gas bottle used to fill gas lanterns, stoves and lanterns.

    0.0
    Add first review
    Not rated yet
    • $5.75
    Sorry, we only have 14 of that item available
  • Check Valve Removal Tool, Universal - R701

    This tool has both a wide and slim slot for almost all check valves and makes changing check valves very easy - will only take a few minutes if used properly.

    C001 Check Valve: This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date.  
    R425 Check Valve: This is the earlier larger style check valve as used on the L227, L427, 220B, 228B, 220C, 228C, 235 lanterns, some lamps, and some early stoves. 

    0.0
    Add first review
    Not rated yet
    • $81.00
    Sorry, we only have 73 of that item available
  • Pump Assembly Neoprene Fixed End, Used - E1420

    Used pump assembly with fixed end, works on the newer stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 2 of that item available
  • 288 Amber Picket Globe - G303

    Picket amber globe for the 288 size lantern. Has no manufacturer markings on it anywhere. It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.

    0.0
    Add first review
    Not rated yet
    • $55.00
    Sorry, we only have 2 of that item available
    • Free Shipping

    286A-288A-290A Directions - E1656

    Used directions for operating the 286A, 288A, and 290A Lanterns. See condition in the photos.


    0.0
    Add first review
    Not rated yet
    • $10.00
    Only 1 left in stock
    Sorry, we only have 1 of that item available
  • Filler Cap Brass Used - E1049

    This is a used one piece brass filler cap. Wear will vary. 

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $7.50
    Sorry, we only have 2 of that item available
  • Eccentric Block, NOS - E1180

    New Old Stock eccentric block for the 285, 286, 288 and 290 lanterns. These are made of metal and will not melt like the original plastic ones. Also known as part number 288C3041.

    0.0
    Add first review
    Not rated yet
    • $12.50
    Sorry, we only have 2 of that item available
  • Globe 288 Clear - G03

    It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5153, 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.


    Also known as part numbers 2000038026 & R214D046C.

    0.0
    Add first review
    Not rated yet
    • $17.90
    Sorry, we only have 13 of that item available
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004345.


    0.0
    Add first review
    Not rated yet
    • $4.95
    Sorry, we only have 268 of that item available
  • Filler Cap, Brass - C004

    This is a new brass one piece filler cap made by Coleman. Comes with a new gasket and will fit most all lanterns and stoves other than the model 242 lantern and 500 stove that have the smaller filler caps. 

    It is also known as part number 425A1405.

    0.0
    Add first review
    Not rated yet
    • $9.60
    Sorry, we only have 372 of that item available
  • Valve Wheel Screw - S77

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-059 is needed.

    0.0
    Add first review
    Not rated yet
    • $1.00
    Sorry, we only have 620 of that item available
  • 286 Heat Shield - C057

    Fits 282, 286, 200B lanterns

    0.0
    Add first review
    Not rated yet
    • $9.75
    Sorry, we only have 91 of that item available
  • 286 Valve Assembly - C056

    This will fit all 286 model lanterns.

    0.0
    Add first review
    Not rated yet
    • $25.85
    Sorry, we only have 6 of that item available
    • Free Shipping

    O-Ring - S21

    Fits the fuel tube on all appliances that have a plastic fuel and air tube.  

    Models: 214, 282, 285, 288, 290, and 295.

    Also fits: 

    • The fuel tube on the 550B stove
    • On the propane regulator of a model 2000004489 Perfect Flow Skillet (reported by a fellow Coleman user). Propane regulator #9933-5251
    0.0
    Add first review
    Not rated yet
    • $1.45
    Sorry, we only have 686 of that item available
  • Generator Nut Used - E1610

    Used Generator nut for the model 214, 222, 229, 286, 288 290, 635 and 639 lanterns.

    0.0
    Add first review
    Not rated yet
    • $3.00
    Sorry, we only have 15 of that item available
  • Nut - E1028

    Nut used for the top of the valve on 214, 286, 288 and 290 models. May have other applications also.

    0.0
    Add first review
    Not rated yet
    • $1.65
    Sorry, we only have 57 of that item available
  • Generator, 286/288 - C007

    This is a new Coleman made generator for lantern models 200B, 286 & 288. Generator includes new gas tip, spring, and tip cleaning wire.
    This part is also known as part number 3000005403.

    0.0
    Add first review
    Not rated yet
    • $19.45
    Sorry, we only have 65 of that item available
  • 288 Valve Block - Used - S118

    This is for models 286A, 288, 288A, 290 and 290A

    Parts Diagrams HERE.

    1651814862060.png

    0.0
    Add first review
    Not rated yet
    • $4.50
    Sorry, we only have 41 of that item available
  • Feed Tube - 282/285/286/288 - C010

    New feed tube assembly made by Coleman. Includes new Schrader valve and O-ring. Fits all 282, 285, 286, and 288 model lanterns.

    0.0
    Add first review
    Not rated yet
    • $6.35
    Sorry, we only have 60 of that item available
  • Eccentric Block, Used - S117

    Used Eccentric Block - these are not the plastic ones, but metal. Also known as part number 214-3041.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 3 of that item available
    • Free Shipping

    Pump Clip - R580

    Pump Clip

    0.0
    Add first review
    Not rated yet
    • $3.25
    Sorry, we only have 451 of that item available
Products: 150 of 77
Show:50

Footer navigation