Search

Search type
76 products found
    • New!

    220C Fuel Cap and Lanyard Used - Aluminum - E1178

    Used, black filler cap with lanyard - in good shape. Comes with new lanyard.  Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $15.00
    Sorry, we only have 1 of that item available
  • 285/286/288 Generator Reproduction - R208

    Reproduction Generator for Models 282, 286 & 288. New generator includes new gas tip, spring, and tip cleaning wire. 

    0.0
    Add first review
    Not rated yet
    • $18.40
    Sorry, we only have 2 of that item available
  • 288 Amber Picket Globe - G303

    Picket amber globe for the 288 size lantern. Has no manufacturer markings on it anywhere. It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.

    0.0
    Add first review
    Not rated yet
    • $55.00
    Sorry, we only have 2 of that item available
  • 288 Heat Shield, Used - E1009

    Fits 285, 288, 290 and 295 model lanterns. 

    These are used and will vary in wear.

    0.0
    Add first review
    Not rated yet
    • $8.50
    Sorry, we only have 3 of that item available
  • 288 Knob, Used - E1399

    Used knob for the 282, 285, 286, 288, 290, 295, 295A and 639 lanterns. May fit others also.

    0.0
    Add first review
    Not rated yet
    • $3.00
    Sorry, we only have 83 of that item available
  • Bail Wrap Protector Black - R513

    This is 12 inches of new black plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.

    0.0
    Add first review
    Not rated yet
    • $1.50
    Sorry, we only have 24 of that item available
  • Bail Wrap Protector Clear - R512

    This is 12 inches of new clear plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.

    0.0
    Add first review
    Not rated yet
    • $1.50
    Sorry, we only have 126 of that item available
  • Ball Nut, 2 Pack - C011

    These are a new Coleman made 2 pack of ball nuts. This is the common sized ball nut used on most Coleman lanterns.
    Also known as part number 3000005384.

    0.0
    Add first review
    Not rated yet
    • $5.85
    Sorry, we only have 221 of that item available
  • Ball Nut, NOS - E1579

    These are NOS Coleman ball nuts

    0.0
    Add first review
    Not rated yet
    • $4.50
    Sorry, we only have 9 of that item available
  • Ball Nut, Used - S101

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    0.0
    Add first review
    Not rated yet
    • $3.00
    Sorry, we only have 17 of that item available
    • Free Shipping

    Check Valve O Ring - S20

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    0.0
    Add first review
    Not rated yet
    • $1.15
    Sorry, we only have 2399 of that item available
  • Check Valve Old Style Reproduction - R577

    This is reproduction of the older style of check valve that would take the original air stem with the larger end. Excellent craftsmanship on these.

    Also known as 242B5381.

    0.0
    Add first review
    Not rated yet
    • $17.60
    Sorry, we only have 39 of that item available
  • Check Valve Removal Tool, Universal - R701

    This tool has both a wide and slim slot for almost all check valves and makes changing check valves very easy - will only take a few minutes if used properly.

    C001 Check Valve: This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date.  
    R425 Check Valve: This is the earlier larger style check valve as used on the L227, L427, 220B, 228B, 220C, 228C, 235 lanterns, some lamps, and some early stoves. 

    0.0
    Add first review
    Not rated yet
    • $81.00
    Sorry, we only have 73 of that item available
  • Check Valve With Stem - C001

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. These are the updated design that uses a smaller head on the air stem. You won't need your current air stem any more as this comes with a new one that is updated and replaces your old one. 

     If your part diagram calls for the 242B5381 or a 621-5361 check valve, then this would be the correct part. It is also known as part number 2006381ZCL.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $12.80
    Sorry, we only have 492 of that item available
  • Coleman Filter Funnel - C024

    New Filter Funnel For Lamps And Stoves. 

    Stops filling your lantern or stove at the correct level.

    0.0
    Add first review
    Not rated yet
    • $12.45
    Sorry, we only have 22 of that item available
  • Collar 285 Used - X33

    Used collar for the model 285 lantern.

    0.0
    Add first review
    Not rated yet
    • $4.35
    Sorry, we only have 1 of that item available
  • Collar Used 282-285 - X34

    Used collar for the 282 and 285 model lanterns

    0.0
    Add first review
    Not rated yet
    • $4.35
    Sorry, we only have 3 of that item available
  • Eccentric Block, NOS - E1180

    New Old Stock eccentric block for the 285, 286, 288 and 290 lanterns. These are made of metal and will not melt like the original plastic ones. Also known as part number 288C3041.

    0.0
    Add first review
    Not rated yet
    • $12.50
    Sorry, we only have 2 of that item available
  • Eccentric Block, Used - S117

    Used Eccentric Block - these are not the plastic ones, but metal. Also known as part number 214-3041.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 3 of that item available
  • Feed Tube - 282/285/286/288 - C010

    New feed tube assembly made by Coleman. Includes new Schrader valve and O-ring. Fits all 282, 285, 286, and 288 model lanterns.

    0.0
    Add first review
    Not rated yet
    • $6.35
    Sorry, we only have 61 of that item available
    • New!

    Filler Cap 3 Piece Aluminum Used - E1570

    This is a used aluminum filler cap.  Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 1 of that item available
  • Filler Cap 3 Piece Green Used - U802

    This is a used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by picking out the ones in best shape first.

    We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.

    Comes with a new gasket for you to install if needed.

    0.0
    Add first review
    Not rated yet
    • $13.00
    Sorry, we only have 5 of that item available
  • Filler Cap 3 Piece Yellow Used - E1040

    This is for one used 3 piece yellow filler cap. 

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 2 of that item available
  • Filler Cap Brass Used - E1049

    This is a used one piece brass filler cap. Wear will vary. 

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $7.50
    Sorry, we only have 2 of that item available
  • Filler Cap Brown Used - E1026

    This is a used one piece filler cap from a 275 lantern. Paint may be chipped or missing in some spots - wear will vary. Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 3 of that item available
  • Filler Cap Dark Green Used - E1431

    This is a used one-piece filler cap that is the darker green used on 288 and similar lanterns. Paint may be chipped or scratched; each one will vary in wear. Comes with one new gasket for you to install if needed.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 23 of that item available
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one-piece filler caps. If your filler cap looks like the one pictured, then this gasket is the correct one. If your filler cap has a screw in the center of it, then this gasket will not work. The red filler cap is shown for illustration purposes only and is not included.

    Also known as part number 425A1361

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $1.35
    Sorry, we only have 2929 of that item available
  • Filler Cap Gray Used - E1307

    This is a used one piece filler cap. Paint may be chipped or missing andwill vary in wear. Gray in color like the new production Dual Fuel models. Includes a new gasket for you to install.

    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 2 of that item available
  • Filler Cap Green Used - U803

    This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear. Comes with a new gasket foryou to install.

    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 17 of that item available
  • Filler Cap Nickel, Used - E1597

    Used nickel plated one piece cap. All will vary in wear.

    Fits most lanterns and stoves except for the model 242 lantern and model 500 stove.  

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 9 of that item available
  • Filler Cap Red Used - U801

    This is a one piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by handing out the ones in best shape first.

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $13.00
    Sorry, we only have 1 of that item available
  • Filler Cap Silver Used - E1385

    This is a used one piece filler cap. Paint may be chipped or missing andwill vary in wear. Silver in color. Includes a new gasket for you to install.

    0.0
    Add first review
    Not rated yet
    • $11.50
    Sorry, we only have 1 of that item available
  • Filler Cap Steel, Used - E1386

    Used steel filler cap for Coleman lanterns. All will vary in wear.

    Comes with a new gasket that you will have to install.

    0.0
    Add first review
    Not rated yet
    • $11.00
    Sorry, we only have 5 of that item available
  • Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    0.0
    Add first review
    Not rated yet
    • $14.65
    Sorry, we only have 50 of that item available
  • Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    0.0
    Add first review
    Not rated yet
    • $15.20
    Sorry, we only have 33 of that item available
  • Filler Cap, Brass - C004

    This is a new brass one piece filler cap made by Coleman. Comes with a new gasket and will fit most all lanterns and stoves other than the model 242 lantern and 500 stove that have the smaller filler caps. 

    It is also known as part number 425A1405.

    0.0
    Add first review
    Not rated yet
    • $9.60
    Sorry, we only have 373 of that item available
  • Gas Bottle, 8 oz. - R321

    This is a new 8 oz. gas bottle used to fill gas lanterns, stoves and lanterns.

    0.0
    Add first review
    Not rated yet
    • $5.75
    Sorry, we only have 14 of that item available
  • Generator, 286/288 - C007

    This is a new Coleman made generator for lantern models 200B, 286 & 288. Generator includes new gas tip, spring, and tip cleaning wire.
    This part is also known as part number 3000005403.

    0.0
    Add first review
    Not rated yet
    • $19.45
    Sorry, we only have 69 of that item available
  • Generator, New - 282/285 - C012

    This is a new Coleman made generator for lantern models 282 and 285. Includes a new gas tip, spring, and tip cleaning wire.
    Also known as part number 3000005622.

    0.0
    Add first review
    Not rated yet
    • $23.15
    Sorry, we only have 51 of that item available
  • Globe 288 Amber No Logo - G04

    Amber globe for the 288 size lantern. Has no manufacturer markings on it anywhere. It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.

    0.0
    Add first review
    Not rated yet
    • $23.50
    Sorry, we only have 74 of that item available
  • Globe 288 Clear - G03

    It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5153, 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.


    Also known as part numbers 2000038026 & R214D046C.

    0.0
    Add first review
    Not rated yet
    • $17.90
    Sorry, we only have 13 of that item available
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $5.75
    Sorry, we only have 483 of that item available
    • Free Shipping

    Large Push On Nut for Neoprene Cups - S09

    Push on nut for pump. The large push on nut is used with the neoprene pump cup.

    0.0
    Add first review
    Not rated yet
    • $3.25
    Sorry, we only have 213 of that item available
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $3.55
    Sorry, we only have 1655 of that item available
  • Large Valve Stem Packing - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞- P01

    This is a 10 PACK - Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    0.0
    Add first review
    Not rated yet
    • $31.95
    Sorry, we only have 165 of that item available
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    3.3
    Score: 3.3 (votes: 3)
    Reviews: 3
    • $3.85
    Sorry, we only have 7580 of that item available
  • Leather Pump Cup - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞 - S81

    This is a 10 PACK of the common Coleman pump cup that fits most lanterns and stoves.

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    0.0
    Add first review
    Not rated yet
    • $34.65
    Sorry, we only have 758 of that item available
  • Mantle Insta-Clip 2 #21 2 pack - M13

    Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    0.0
    Add first review
    Not rated yet
    • $4.95
    Sorry, we only have 69 of that item available
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004345.


    0.0
    Add first review
    Not rated yet
    • $4.95
    Sorry, we only have 268 of that item available
  • Mantle String Tie #21 4 Pack - M02

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004344.

    0.0
    Add first review
    Not rated yet
    • $7.45
    Sorry, we only have 60 of that item available
Products: 150 of 76
Show:50

Footer navigation