Search

Search type
278 products found
  • Vent Bolt - R625

    Brass Vent Bolt for 243B, and all 241 Lanterns - this bolts down into the top of the frame to hold the vent.

    0.0
    Add first review
    Not rated yet
    • $14.65
    Only 1 left in stock
    Sorry, we only have 1 of that item available
  • Vent 275, Used - V110

    Used vent for the model 275 and 275A. Has two chips - shown in photos.

    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 1 of that item available
  • Valve Wheel Screw, Used - S103

    Used valve wheel screw.  Will be in good condition.


    0.0
    Add first review
    Not rated yet
    • $1.00
    Sorry, we only have 3 of that item available
  • Valve Wheel Screw - S77

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-059 is needed.

    0.0
    Add first review
    Not rated yet
    • $1.00
    Sorry, we only have 620 of that item available
  • Valve Stem Retaining Ring - 1/4" - S04

    This is a new brass retainer ring used on the bottom of many Coleman valve stems. This is designed for a 1/4" valve stem diameter, but can be cut for the smaller 3/16" versions if needed. You will need to open it up, place it over the valve stem, then bend it back. This is used to hold the bushing in place in front of the valve stem packing.

    0.0
    Add first review
    Not rated yet
    • $3.70
    Sorry, we only have 14 of that item available
  • Valve Stem Nut, New - R415

    Reproduction valve stem nut for the model 200A lantern. Also fits the 202, 242, 243, and 247 series lanterns and also the 425F and G stoves. Does not come with the new packing.

    0.0
    Add first review
    Not rated yet
    • $6.60
    Sorry, we only have 31 of that item available
  • Valve Stem Nut, 288 - 288A, Used - E1198

    Used valve stem packing nut. Will also require a P01 graphite packing located HERE.


    0.0
    Add first review
    Not rated yet
    • $3.75
    Only 3 left in stock
    Sorry, we only have 3 of that item available
  • Valve Stem Nut Used - E1575

    Used valve stem nut for many Coleman lanterns.

    0.0
    Add first review
    Not rated yet
    • $3.50
    Sorry, we only have 2 of that item available
  • Valve Stem Nut - S152

    Valve stem nut for 220, 228, 275 Lanterns. Also fits the M1942 Stove. May fit others.

    0.0
    Add first review
    Not rated yet
    • $7.40
    Sorry, we only have 170 of that item available
    • New!

    Valve Packing 275 - P04

    This is special valve packing for the model 275 lantern. It is too big for other models. Has a 7/16 inch outside diameter and is 3/8 inches long.

    0.0
    Add first review
    Not rated yet
    • $4.35
    Sorry, we only have 82 of that item available
  • Valve Assembly, Used - E1642

    Used valve assembly for the models 242 through 242C lantern also 243 & 243A. We have not done any repair work to these at all. We will check to make sure the tip cleaner lever moves as it should and the eccentric block goes up and down.

    Valve stem packing has not been changed but one will be included for you to change if needed.

    This will also work on the 200A lanterns. The difference is that the original valve wheel comes off with the 200s and the original valve wheel does not come off on the 242s. If you don't care about the valve wheel, these will work for the 200 models.

    0.0
    Add first review
    Not rated yet
    • $36.00
    Sorry, we only have 13 of that item available
  • Valve Assembly, Used - E1356

    Used valve assembly for the models 242 through 242C lantern also 243 & 243A. We have not done any repair work to these at all. We will check to make sure the tip cleaner lever moves as it should and the eccentric block goes up and down.

    New valve stem packing has been installed.

    This will also work on the 200A lanterns. The difference is that the original valve wheel comes off with the 200s and the original valve wheel does not come off on the 242s. If you don't care about the valve wheel, these will work for the 200 models.

    0.0
    Add first review
    Not rated yet
    • $42.00
    Sorry, we only have 23 of that item available
  • Valve Assembly - C067

    Valve Assembly for the 285 lantern.

    0.0
    Add first review
    Not rated yet
    • $28.80
    Sorry, we only have 61 of that item available
  • Valve Assembly - 290 - C018

    This is a Coleman made new valve assembly that fits the 290 and 290A model lanterns. These have a metal eccentric block, feed tube, new knob and screw included.

    0.0
    Add first review
    Not rated yet
    • $27.55
    Sorry, we only have 26 of that item available
  • Used Square Nut - E1406

    This is a used pump square nut.

    Comes with one square nut ONLY.

    0.0
    Add first review
    Not rated yet
    • $1.75
    Sorry, we only have 192 of that item available
    • 3% less

    Used Pump Assembly Spring - S120

    Used Pump Assembly Spring

    Spring ONLY

    0.0
    Add first review
    Not rated yet
      • 3% less
      Market price:$3.35 you save $0.10
    • $3.25
    Sorry, we only have 155 of that item available
  • Used Generator Body - E1478

    These are from used generators - they are straight with no gas tip or pricker rod inside. They will most likely need to be cleaned to be used. The interior may be clear, or it may have remnants of old internal packing/springs.

    0.0
    Add first review
    Not rated yet
    • $1.00
    Sorry, we only have 246 of that item available
  • Used 200A Valve Assembly - U822

    Used valve assembly for 200 and 200A lanterns. In good condition. Valve stem packing has not been changed but one will be included for you to change if needed.

    This will also work on the 242b & 242c lanterns. The difference is that the original valve wheel comes off with the 200s and the original valve wheel does not come off on the 242s. If you don't care about the valve wheel, these will work for the 242 models.

    0.0
    Add first review
    Not rated yet
    • $34.00
    Sorry, we only have 23 of that item available
    • Free Shipping

    U Clip, Used - S96

    Used Part that Fits models 214, 220K, 228K, 282, 285, 286, 288, 290, & 295 lanterns. 

    Will all vary in wear and some may have rust .

    Same as part number 288-1251

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 6 of that item available
  • Tip Cleaner Stem Reproduction - R651

    Reproduction tip cleaner assembly for the model 200, 200A, 201, 202, 242, 247 and similar lanterns. Also fits the 523 and the 520/M1941 stove.

    0.0
    Add first review
    Not rated yet
    • $14.55
    Sorry, we only have 345 of that item available
  • Spring Clip (Preheater Cup) - R579

    Spring Clip for 249 Preheater Cup. This is an exact reproduction. Fits well also on the 200, 202 frames also - see photos. Part also known as 235-3111

    0.0
    Add first review
    Not rated yet
    • $5.45
    Sorry, we only have 285 of that item available
  • Sparker Flints Zippo - R508

    Zippo brand Flints for the Coleman Lantern Spark Igniter.

    0.0
    Add first review
    Not rated yet
    • $4.60
    Sorry, we only have 80 of that item available
  • Spark Igniter - E1273

    New Coleman made Spark Igniter. Comes in new packaging with instructions.

    0.0
    Add first review
    Not rated yet
    • $15.45
    Sorry, we only have 1376 of that item available
  • Smith-Victor Large Carry Case - CC15

    Used Smith-Victor carry case for all large hat 228 style lanterns. Will also fit 220, 252, 275, 290, and 295. 

    Has some scratches, one edge is bent a little but doesn't hinder the case closing, both latches aren't perfect on latches tight but is a little bent, the other latch is loose but still closes.

    This product is not included in the OCP free shipping program.

    0.0
    Add first review
    Not rated yet
    • $85.00
    Sorry, we only have 1 of that item available
  • Small valve stem packing - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞 - P02

    This is a 10 PACK. Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the smaller valve stem packing. It is 5/16" long & the hole diameter is 3/16". This will only work on valve stems that are 3/16" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    Typically this is used on the old 327 Quicklites, 427 lanterns and early CQ lamps, irons and some lanterns with the smaller diameter valve stem. The early 425F stoves use this, but could also use the larger P1 packing. Make sure your stem diameter is 3/16" for this part. If it is larger, you need the P1 HERE.

    Made of 100% graphite.

    0.0
    Add first review
    Not rated yet
    • $29.25
    Sorry, we only have 44 of that item available
  • Small valve stem packing - P02

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the smaller valve stem packing. It is 5/16" long & the hole diameter is 3/16". This will only work on valve stems that are 3/16" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    Typically this is used on the old 327 Quicklites, 427 lanterns and early CQ lamps, irons and some lanterns with the smaller diameter valve stem. The early 425F stoves use this, but could also use the larger P1 packing. Make sure your stem diameter is 3/16" for this part. If it is larger, you need the P1 HERE.

    Made of 100% graphite.

    0.0
    Add first review
    Not rated yet
    • $3.25
    Sorry, we only have 449 of that item available
  • Schrader Valve Core - R510

    These are new fuel rated valve cores and will fit the 214, 275, 275A, 285, 286, 288, 288A, 290, 290A lanterns and also the 400, 400A and 508 stoves.
    These will function for Off/On in the following stoves, but may not allow full flame control, particularly at the low end of flame adjustment: 400B, 440, 442, 3024, 508A and 533.

    Need more information on the valve core? Click HERE.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $5.15
    Sorry, we only have 469 of that item available
  • SMP Milspec Decal One Piece - D167

    Original one piece decals for the later SMP military lanterns. These are not reproductions. They came from the old stock of the factory when it closed.

    0.0
    Add first review
    Not rated yet
    • $15.20
    Sorry, we only have 44 of that item available
  • Reproduction Gas Tip - GT2

    Reproduction gas tip for 200A5891 generator. Also works well for using on the 220 generators to do a kerosene conversion.

    0.0
    Add first review
    Not rated yet
    • $6.75
    Sorry, we only have 31 of that item available
  • Reproduction Canadian Ball Nut 242 - R575

    Reproduction Canadian brass ball nut for the model 242A, 242B, 242C, 242K , 234A, 249 and 247 lanterns. 

    0.0
    Add first review
    Not rated yet
    • $9.95
    Sorry, we only have 34 of that item available
  • Rebuild Kit - all 242 Model Lanterns - K09

    Rebuild kit for models 242, 242A, 242B, and the 242C lanterns. Cures most troubles.

    Includes:

    • 4 Peerless string tie mantles for the 242 lanterns
    • 1 Generator for the 242 lanterns
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 1 Cap Gasket specific to the 242 - for the bottom of your fuel cap.

    See Diagram in "Description" under photo at bottom left of this page

    More parts for: 

    0.0
    Add first review
    Not rated yet
    • $31.05
    Sorry, we only have 425 of that item available
  • Rebuild Kit - 275 Lanterns - K17

    Rebuild kit for both the 275 and 275A lanterns. Cures most troubles.

    Includes:

    • 4 Peerless string tie mantles for the 275 or 275A lantern
    • 1 Reproduction Generator for the 275 or 275A lantern
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 1 Cap Gasket - for your fuel cap.

    See Diagram in "Description" under photo at bottom left of this page

    More parts for: 

    0.0
    Add first review
    Not rated yet
    • $31.35
    Sorry, we only have 60 of that item available
  • Quadrant Glass Channel NOS - E1628

    NOS Military Lantern globe channel. Crimps on burner frame to hold quadrant globe panes.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 5 of that item available
  • Pump Screw, Used - S108

    This is for a qty of one used pump screw. This is the smaller sheet metal style screw used on the 220/228D, 220/228E, and early 200A lanterns. It is not the one for the 242 series lanterns. Much too small for the 242 series lanterns. Also known as part number 530-452.

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 73 of that item available
  • Pump Screw, Reproduction - R504

    Stainless steel screw for the early style pumps. Fits many older models like the 242s, 243s, 247 and 249. These have the early type hard to find thread pattern. The original slotted pump screw has a more rounded head where these are flat.

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 510 of that item available
  • Pump Screw - S70

    This is the smaller sheet metal style screw used on the 202, 220/228D, 220/228E, and early 200A lanterns. It is not the one for the 242 series lanterns. Much too small for the 242 series lanterns. Also known as part number 530-452.

    0.0
    Add first review
    Not rated yet
    • $0.50
    Sorry, we only have 288 of that item available
  • Pump Cup, Neoprene - C019

    This is a new Coleman made replacement pump cup  for all lanterns that came with the rubber style.

    0.0
    Add first review
    Not rated yet
    • $3.55
    Sorry, we only have 165 of that item available
  • Pump Cup Assembly - S38

    New reproduction pump cup assembly for 242 NL (No Letter), 242A , 242K, 243 , 246 and or any Coleman lantern or stove from the early 30's with a solid pump stem with no air hole in the middle. These are made for the USA manufactured Coleman pump shafts and will fit as they should. If yours is made in Canada, you will have to use a small file to widen the brass center to a cone shape to match your pump shaft - see the photos. Also known as part number 233-518

    0.0
    Add first review
    Not rated yet
    • $16.50
    Sorry, we only have 15 of that item available
  • Pump Cup & Nut, Neoprene - C008

    Brand new Coleman made neoprene pump cup with a large push on nut made by Coleman. Fits pretty much all Coleman Stoves And Lanterns.
    Also known as part number 6391091

    0.0
    Add first review
    Not rated yet
    • $5.10
    Sorry, we only have 151 of that item available
    • Free Shipping

    Pump Clip, Used - S100

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 75 of that item available
    • Free Shipping

    Pump Clip - R580

    Pump Clip

    0.0
    Add first review
    Not rated yet
    • $3.25
    Sorry, we only have 451 of that item available
  • Pump Assy Leather Used Push On Nut - U811

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 12 of that item available
  • Pump Assembly, Universal - C045

    Universal pump assembly with a leather cup that fits almost all Coleman lanterns and stoves. 

    Does not fit the small Peak 1 lanterns or stoves, and also some older style pumps found on QuickLites and similar lanterns/stoves where the pump cap does not have the clip that holds it onto the fount. Replaces part number 242D5201

    0.0
    Add first review
    Not rated yet
    • $13.35
    Sorry, we only have 74 of that item available
  • Pump Assembly, Universal - C006

    This is a replacement pump assembly, made by Coleman for most stoves and lanterns except for the small Peak 1 type products that have a shorter pump rod.
    This pump comes with the neoprene pump cup and has parts you can exchange to match your existing type.


    0.0
    Add first review
    Not rated yet
    • $10.41
    Sorry, we only have 47 of that item available
  • Pump Assembly Plastic Cap, Used - E1426

    Used pump assembly with plastic cap, works on the newer stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 13 of that item available
  • Pump Assembly Neoprene Used - E1561

    Used pump assembly for most stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    0.0
    Add first review
    Not rated yet
    • $7.00
    Sorry, we only have 5 of that item available
  • Pump Assembly Neoprene Fixed End, Used - E1420

    Used pump assembly with fixed end, works on the newer stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 2 of that item available
  • Pump 242B Steel, Used - E1014

    Used steel pump assembly for the model 242B and early 242C lanterns. Will not work on later models. It has been cleaned and will have a new pump leather. Has the double screw holes on the plunger cap.

    0.0
    Add first review
    Not rated yet
    • $28.00
    Sorry, we only have 3 of that item available
  • Pre-Heater Cup, Small - C016

    Smaller size pre-heater cup for the 201 lantern. Is 1 inch in diameter and the center hole can accommodate a maximum of 5/16".

    0.0
    Add first review
    Not rated yet
    • $10.05
    Sorry, we only have 58 of that item available
  • Pre-Heater Cup 249 - R316

    Reproduction brass pre-heater cup for the model 249 lantern.

    0.0
    Add first review
    Not rated yet
    • $15.50
    Sorry, we only have 51 of that item available
Products: 150 of 278
Show:50

Footer navigation