Other Brands
Globe 990 - G171
The Canadian 990 globe was made to fit the model 331 lantern. Does not fit any other gas lantern model. Very rare globe to find these days. Will also fit the Thermos lantern models 8311 and 8312.
Generator Sunshine Safety Q99 - R404
Reproduction generator for the Sunshine Safety lanterns and lamps. Similar to the Coleman Q99 but has a different nut. Will not work on Coleman lanterns and lamps.
Sears Fount , 3-66 F163
Used Sears fount dated 3-66.Â
It's in pretty good shape just has some scuffs and minor scratches.Â
Akron Lamp Generator - E1393
This is a generator for a Akron lamp iron. The body measures a little over 3 3/4 inches long. Has what looks more like a gear on the tip cleaner rod than threads. If you know the application, please share.
Tilley Service Pack, SP4 - E1337
Only 3 left in stockThis is a service pack for burner 1222 - R1A and R55 heaters
Tilley Service Pack, SP1 - E1172
Only 1 left in stockThis is a service pack for cock 777 and pump assembly 2557
Unknown Valve and Generator - E1523
Don't know the part number for this valve and generator. It measures 10 1/4 inches long from tip to end of nut.
Generator Kamplite Inverted - R403
Reproduction inverted generator for the AGM Kamplite inverted lanterns. Fits models IL1, IL11, and Thermos models 8319, 8321.
Akron Iron Generator, New - E1618
We are pretty sure this is for an Akron Diamond Iron. Please check measurements.
Generator AGM Kamplite LRL21 - R400
Reproduction generator for the AGM model LRL21, LRL21A, LRL22, KL2, and JC Higgins model 710.7400, 710.74001 lanterns. Part number on JC Higgins parts diagram is 7110 - Generator Assembly
Duo Therm Fuse Holder - E1001
Only 1 left in stockDuo therm Replacement Fuse Holder for RV furnaces. Fits duo therm furnace series 659 and 660.
Thermos Unknown Generator #1 - E1311
AGM-Thermos style generator. Not sure what model this one fits. It is 3/9/16 inches long.
Globe Century 8939 - G31
This horizontally striped frosted globe is approximately 3 7/8 inches tall and has a 4 3/8 inch diameter.
Generator Lantern - No Wire - E1389
Thermos generator for inverted lantern models 8319 and 8321. Also fits Kamplite and JC Higgins inverted lanterns. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, BUT DOES NOT HAVE a tip cleaning wire.
AGM Iron Generator - E1287
I believe these generators are for an AGM iron. They measure 4 inches long.
Dura Camp Burner Assembly - E1295
New old stock burner assembly for the double mantle Dura Camp lantern.
Unknown Generator #2 - E1033
Don't know what this one fits. It could be for a lantern or small stove. The gen body is 4 3/16 inches long. The tip cleaner rod extends out another 5/8.
Thermos Stove Tank - ST35
New old stock stove tank for the 3 burner Thermos stove models 8431 and 8432.
- New!
Filler Cap 3 Piece AGM Used - E1634
Used AGM Cap. Has a steel screw and new filler cap gasket. This filler cap has the AGM hole in top. Shows signs of wear. Could be any combination of the following; wrench marks, oxidization, or fading.
Generator Stove - E1507
Thermos generator for models 8489, 8490, 8491 stoves. New generator includes new gas tip, spring, and tip cleaning wire.
Satco T5 4W Bulb - E1648
Only 5 left in stockThis is a 4 watt Satco fluorescent bulb, with a miniature bi pinned base.
AGM Stove Porcelain Black Knob Used - E1209
This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.
Tip Cleaner Stem Reproduction - R700
This is a reproduction tip cleaner stem for the model 220/228B through 220/228F lantern. Looks a little different that the original but is a great lower cost alternative to the original ones.
This also fits the AGM 2572 & Kamplite RL-3
- Free Shipping
Thermos 8326 Directions - E1664
Only 1 left in stockUsed directions for operating the Thermos 8326 Lantern. Some staining - see photos.
Unknown Burner #7 - E1582
Don't know what this came from. It is about 4 7/8" long, the smallest end is about 3/4" wide and the biggest end is about 7/8" wide. From wing to wing it is about 2 1/2" wide.
Unknown Fuel Tube - E1592
Only 1 left in stockUnknown fuel tube possibly for a stove. Measures 5 3/4" long.
Don't know if it is used or NOS.
AGM Stove Porcelain Cream Knob Used - E1361
This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.
AGM Stove Porcelain White Knob Used - E1362
This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.
Sears Direction Disc, Reproduction - S12
Reproduction control knob disc for red Sears lanterns models.
- Free Shipping
Sears 476.72213 Collar, Used - E1659
This is a used collar for a model 476.72213 Sears lantern. Wear will vary.
Sears 476.74070 Collar, Used - E1540
This is a used collar for a model 476.74070 Sears lantern. Wear will vary.
Sears 476.74060 Collar, Used - E1683
This is a used collar for a model 476.74060 Sears lantern. Wear will vary.
Unknown Valve Stem - E1334
Unknown valve stem. Has a tag on it that says it is part number 4-4005. Measures about 3 1/2 inches long.
Bestsellers
- Free Shipping
- Free Shipping
- Free Shipping