200A

Products: 150 of 97
Show: 50
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.25
  • Peerless Mantles 2C-HG - M01

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $5.65
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one. 

    If your filler cap has a screw in the center of it then this gasket will not work. 

    The red filler cap is shown for illustration purposes only and is not included.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.30
  • Check Valve With Stem - C01

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. Comes with the new O ring. If your part diagram calls for the 242B5381 or a 621-5361 check valve then this would be the correct part. The latest part number for this is 2006381ZCL.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $9.40
  • Generator Tube Packing - P05

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $2.50
  • Peerless Mantles 24-A - M04

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.95
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Not rated yet
    • $3.55
  • Decal - Fits 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns - D11
    • Free Shipping

    Decal - Fits 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns - D11

    White Border Logo with "Reg.", & "Lantern". For 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns. Also fits 502 stove and the 335, 236A, 237A Lanterns.



    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $3.55
  • Mantle String Tie #21 4 Pack - M02

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $7.00
  • Decal - Fits 1965  to 1971 200A, 220 & 228 F Lanterns - D12
    • Free Shipping

    Decal - Fits 1965 to 1971 200A, 220 & 228 F Lanterns - D12

    White Border Logo with "Reg.", "Pats. Pending" & "Lantern" for1965  to 1971 200A, 220 & 228 F Lanterns. Also fits the 220G, 

    Not rated yet
    • $3.55
  • Burner Screen - S89
    • Free Shipping

    Burner Screen - S89

    This replacement screen will fit the burner caps used on 242 and 200/200A model lanterns.

    Not rated yet
    • $2.05
  • New Filler Cap Brass - C04

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $9.60
  • Decal - Fits 1961  to 1964 200A, 220 & 228 E & F Lanterns - D13
    • Free Shipping

    Decal - Fits 1961 to 1964 200A, 220 & 228 E & F Lanterns - D13

    No Border Logo with "Reg." & "Lantern" for 1961  to 1964 200A, 220 & 228 E & F Lanterns

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $3.55
  • Filler Cap Screw 220 Size - S67

    Stainless steel filler cap screw for the 3 piece filler caps used on the 200A, 220B, 220C, 220D, 220E, 220F, 427 and similar sized filler caps.

    Fits the cap number: 220C1401

    Not rated yet
    • $1.10
  • Burner Cap New - C09

    New burner cap for the model 242 series lanterns. Also fits the 200, 200A, 202, 243, and 247 lanterns.

    Not rated yet
    • $6.60
  • Leather Pump Cup And Back-Up Plate - C05

    Leather pump cup, push on nut and back-up plate. New part number 3000005094.

    Not rated yet
    • $6.45
  • Spark Igniter - E1273

    New Coleman made Spark Igniter. Comes in new packaging with instructions.

    Not rated yet
    • $12.70
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $3.75
  • Valve Wheel Screw - S72

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-058 is needed.

    Not rated yet
    • $1.00
  • Decal - Fits 1954  to 1960 200A Lanterns - D14
    • Free Shipping

    Decal - Fits 1954 to 1960 200A Lanterns - D14

    Yellow Border Logo Used on Coleman 200A Lanterns 1954 to 1960 "Reg."

    Not rated yet
    • $3.55
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    Not rated yet
    • $5.75
  • Pal Nut - S16

    Pal nut for the 200, 200A, 201 and 202 lanterns. Also used on some stoves.

    Need the washers for under a 200 or 200A frame? Look HERE.


    Not rated yet
    • $1.10
  • Ball Nut - S09
    • New!

    Ball Nut - S09

    New Single Ball Nut. Fits all Coleman lanterns except the 242 type models.

    Not rated yet
    • $3.25
  • Pump Cup Neoprene - S13

    Pump Cup Neoprene for most lanterns

    Not rated yet
    • $3.55
  • Decal - Fits 1952 & 1953 200A Lanterns - D16
    • Free Shipping

    Decal - Fits 1952 & 1953 200A Lanterns - D16

    Yellow Border Logo Used on Coleman 200A Lanterns 1952 - 1953

    Not rated yet
    • $3.55
  • Pump Screw - S69

    This is the smaller sheet metal style screw used on the 202, 220/228D, 220/228E, and early 200A lanterns. It is not the one for the 242 series lanterns. Much too small for the 242 series lanterns. Also known as part number 530-452.

    Not rated yet
    • $0.50
  • Decal - Fits 1951 200A & 1951 thru 1954 220 & 228E Lanterns - D17
    • Free Shipping

    Decal - Fits 1951 200A & 1951 thru 1954 220 & 228E Lanterns - D17

    Coleman Lantern Logo for 1951 200A and 1951 thru 1954 220 & 228E Lanterns

    Not rated yet
    • $3.55
  • Ball Nut 2 Pack - C11

    Ball Nut 2 Pack.

    Not rated yet
    • $5.85
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $9.85
  • Generator Nut - S176
    • New!

    Generator Nut - S176

    Generator nut. Fits many models of lanterns which take the 220E5891 generator: 220s, 228's, 275. Also fits many other models. Find your parts diagram HERE and verify the generator nut is listed as 605-210. 

    Not rated yet
    • $5.85
  • Used Generator Nut - S26

    Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

    Not rated yet
    • $2.00
  • Decal - Fits 1961 200A Lanterns - D22
    • Free Shipping

    Decal - Fits 1961 200A Lanterns - D22

    Fits 1961 200A Lanterns - Yellow Border Logo

    Not rated yet
    • $3.55
  • Ball Nut Used - S18

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    Not rated yet
    • $3.00
  • Check Valve O Ring - S36
    • Free Shipping

    Check Valve O Ring - S36

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Burner Frame Stainless - R500

    This is a reproduction stainless steel burner frame for the model 202. It will also work on all models 200 and 200A.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $29.45
  • Tip Cleaner Stem Reproduction - S198

    Reproduction tip cleaner assembly for the model 200, 200A, 201, 202, 242, 247 and similar lanterns. Also fits the 520/M1941 stove.

    Not rated yet
    • $14.55
  • 200 Burner Frame Washer Kit - S66

    These come in a pair of 2. They are new stainless steel washers that go under the burner frame on all 200 and 242 lanterns. Identical size as the originals.

    New 200 burner frame Pal Nut is HERE.

    New 200 burner frame Nut is HERE.

    Not rated yet
    • $1.95
  • Pump Clip - S22
    • Free Shipping

    Pump Clip - S22

    Pump Clip

    Not rated yet
    • $3.25
  • Valve Wheel Screw Used - S24

    Used valve wheel screw.  Will be in good condition.

    Not rated yet
    • $0.80
  • Pump Assembly Leather Used Square Nut - E1256

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $13.55
  • Fuel Tube Spring Brass - S159

    Fuel tube spring for lanterns with a fuel and air tube. Not used on lamps.

    Not rated yet
    • $3.75
  • Burner Tube 200A - R307

    200A Burner Tube

    Not rated yet
    • $3.90
  • Valve Wheel Black Old Style Used - S79

    This is a used part and may show signs of wear. There may also be a few small chips in it. This is the old style black valve wheel for 200A, 202, 220D, 220E and 220F, and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. It is the solid back style.

    Not rated yet
    • $11.00
  • Air Stem Used Old Style - S31

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $4.25
  • Black Valve Wheel New Style USED - S78

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    Not rated yet
    • $9.00
  • Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.20
  • Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.90
  • Lock Nut - S135

    Lock Nut for the 200A lantern. Goes on the top end of the burner tube.

    Not rated yet
    • $4.90
  • Eccentric Block - S21

    Eccentric Block

    Not rated yet
    • $2.70