220B

Products: 150 of 118
Show: 50
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a bolt in the center then these gaskets will work. 

    Red 3 piece filler cap shown for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.25
  • Peerless Mantles 2C-HG - M01

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $6.55
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one-piece filler caps. If your filler cap looks like the one pictured, then this gasket is the correct one. If your filler cap has a screw in the center of it, then this gasket will not work. The red filler cap is shown for illustration purposes only and is not included.

    Also known as part number 425A1361

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.30
  • Generator Tube Packing - P05

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $2.50
  • Peerless Mantles 24-A - M04

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $4.10
  • Generator for 220/228/275 - C002

    New Coleman made generator for 220, 228, 275, and similar Sears lanterns. The new generator includes new gas tip, spring, and tip cleaning wire.


    Will fit Coleman Lanterns: 220 B thru 220 J, 228 B thru J, 275 & 275A
    Fits Coleman Lamp Models 117A, 118A, 118B, 119A, 132A, 133, 143 and 150
    Fits Sears Lantern models 476.74060, 476.72212, 476.72213 and 476.74070

    This is the same generator as the old part number T44 and same as new part number 3000005090. 

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $17.75
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Not rated yet
    • $3.55
  • Mantle String Tie #21 4 Pack - M02

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004344.

    Not rated yet
    • $7.45
  • Filler Cap Screw 220 Size - S68

    Stainless steel filler cap screw for the 3 piece filler caps used on the 200A, 220B, 220C, 220D, 220E, 220F, 427 and similar sized filler caps.

    Fits the cap number: 220C1401

    Not rated yet
    • $1.10
  • Leather Pump Cup Kit - C005

    This is a new leather pump cup, push on nut and back-up plate. This will fit most all lanterns and stoves. If converting from a rubber pump cup, make sure you use the new back up plate in this kit.

    Also known as part number 3000005094.

    Not rated yet
    • $6.45
  • Spark Igniter - E1273

    New Coleman made Spark Igniter. Comes in new packaging with instructions.

    Not rated yet
    • $14.45
  • 220 Burner Screen - S30
    • Free Shipping

    220 Burner Screen - S30

    Burner screen for the model 220 and 228 lanterns. Fits most double mantle lanterns and lamps with small burner caps.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.05
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004345.


    Not rated yet
    • $4.95
  • Pump Assembly, Universal - C006

    This is a replacement pump assembly, made by Coleman for most stoves and lanterns except for the small Peak 1 type products that have a shorter pump rod.
    This pump comes with the neoprene pump cup and has parts you can exchange to match your existing type.


    Not rated yet
    • $10.41
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $5.75
  • Check Valve O Ring - S20
    • Free Shipping

    Check Valve O Ring - S20

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Ball Nut, 2 Pack - C011

    These are a new Coleman made 2 pack of ball nuts. This is the common sized ball nut used on most Coleman lanterns.
    Also known as part number 3000005384.

    Not rated yet
    • $5.85
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $9.85
  • Generator Nut, Used - S105

    Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

    Not rated yet
    • $2.00
  • Air Tube Screw - S72

    Screw for tip cleaner assembly to air intake tube. Flat head screwdriver type used on earlier 220/228 models.

    Not rated yet
    • $0.25
  • Generator Nut - S142

    Generator nut. Fits many models of lanterns which take the 220E5891 generator: 220s, 228's, 275. Also fits many other models. Find your parts diagram HERE and verify the generator nut is listed as 605-210. 

    Not rated yet
    • $5.85
  • 220/228 Air Tube Screw Phillips - S74

    Screw for tip cleaner assembly to air intake tube. Phillips head screwdriver type used on later 220/228 models.

    Not rated yet
    • $0.25
  • Wrench 220B - R300

    Wrench for the lantern models 220/228B through 220/228F. Fits the small nut at the bottom of the burner frame. Angled to fit that hard to get at nut. It is a 9/16 wrench.

    Not rated yet
    • $9.75
  • Pump Assembly Leather Used Square Nut - U810

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $13.50
  • Rebuild Kit - 220 & 228 Lanterns - K02

    Rebuild kit for both the 220 and 228 Coleman lanterns. Cures most troubles.

    Includes:

    • 4 Coleman string tie mantles for your lantern
    • 1 Coleman generator
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 2 Cap Gaskets - for the bottom of your fuel cap. 1 each of the two possible types needed

    See Diagram in "Description" under photo at bottom left of this page

    Not rated yet
    • $32.85
  • Fuel Tube Spring, Stainless - R581

    New stainless fuel tube spring for the models 200, 200A, 202, 220 series, 228 series, and 242 series lanterns. Also for the 530 pocket stove and most likely many others. Overall measures 9/16" long, OD of 3/16" and an ID of approximately 1/8".

    Not rated yet
    • $2.75
  • Valve Wheel Black Old Style, Used - S113
    • New!

    Valve Wheel Black Old Style, Used - S113

    This is a used part and may show signs of wear. There may also be a few small chips in it. This is the old style black valve wheel for 200A, 202, 220D, 220E and 220F, and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. It is the solid back style.

    Not rated yet
    • $11.00
  • Air Stem, Old Style, Used - S107

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $3.75
  • Black Valve Wheel New Style, Used - S112

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    Not rated yet
    • $9.00
  • Check Valve Milspec - R421

    Reproduction check valve for the military lanterns. Will also fit the models 220/228B and 220/228C. Will not fit the later style lanterns.

    Not rated yet
    • $18.55
  • 327 Mica Globe - G09

    This is a reproduction mica globe for the model 327 lantern. It will also fit on any lanterns that would take a 220 size globe. It is 5 1/4 inches tall. It has a diameter of approximately 4 7/8 inches. The craftsmanship is nice and it is like the old mica globes that went into the first lanterns. Has a lighting door. Mica is a mineral. It may have variations in clarity, small spots, light scratches or other natural discolorations.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $88.50
  • Check Valve Old Style - R425

    Reproduction check valve. This is the earlier larger style check valve as used on the L227, L427, 220B, 228B, 220C, 228C, 235 lanterns, some lamps, and some early stoves.

    Not rated yet
    • $18.55
  • Tip Cleaner Stem Reproduction - R700

    This is a reproduction tip cleaner stem for the model 220/228B through 220/228F lantern. Looks a little different that the original but is a great lower cost alternative to the original ones.

    This also fits the AGM 2572 & Kamplite RL-3 

    Not rated yet
    • $11.20
  • Tip cleaner Assembly Used - E1248
    • New!

    Tip cleaner Assembly Used - E1248

    This is a used part but is still in good working condition.


    Not rated yet
    • $25.50
  • Parts Safe Gasket 220 - E1446

    This is a new gasket for your metal snap on parts safe. Fits the 220 size metal safe.

    Not rated yet
    • $4.65
  • Vent Rod 220 Long - R215
    • New!

    Vent Rod 220 Long - R215

    Longer vent rod for models 220/228B through 220/228E and 235.

    Not rated yet
    • $6.85
  • Burner Tube Brass 2 7/8 - E1254

    Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

    Not rated yet
    • $4.35
  • 220/228 Valve Bushing Set - S134

    This is the set of bushings used on both sides of the graphite packing on the valve stem of the 220/228B through 220/228K lanterns.

    Not rated yet
    • $6.35
  • Vent Rod Quicklite - S93

    Vent rod for the Quick-Lite lanterns. It is 1 1/4 inches long.

    Not rated yet
    • $6.50
  • Burner Cap 220 Brass Hex - S32

    Brass burner cap with hex head for easy installation and removal. Fits most models of double mantle lanterns and lamps.

    Solid brass with stainless steel screen.

    Same part number as 112-323

    Not rated yet
    • $5.60
  • 220 Globe White Letter Germany - G05

    German made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $20.90
  • 220 Red Logo Replacement Globe USA - G22
    • New!

    220 Red Logo Replacement Globe USA - G22

    This is a US made replacement globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Not rated yet
    • $24.50
  • Burner Cap 220 Steel Hex - E1267

    Steel burner cap for most models of double mantle lanterns and lamps. Has hex head for easy installation and removal.

    Not rated yet
    • $4.55
  • Gas Tip Used - GT1

    Used Gas tip.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.15