220D

Products: 150 of 86
Show: 50
  • Generator Lantern - C2

    New generator for 220, 228, 275, and similar Sears lanterns. New generator includes new gas tip, spring, and tip cleaning wire. Same generator as the old part number T44. Same as new part number 3000005090.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $14.10
  • Mantle String Tie #21 2 pack - M3

    Coleman's Most Popular Sized Mantles. 2 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $3.45
  • Mantle String Tie #21 4 Pack - M2

    Coleman's Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $6.45
  • Peerless Mantles 2C-HG - M1

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $5.20
  • Peerless Mantles 24-A - M4

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.60
  • Leather Pump Cup - S33

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.45
  • Leather Pump Cup And Back-Up Plate - C6

    Leather pump cup, push on nut and back-up plate. New part number 3000005094.

    Not rated yet
    • $5.75
  • 220 Globe Green Sunrise Logo - G44

    This is an original used green sunrise logo globe made between 1946 and 1959. Although used, it has been inspected for damage or defects. The light green logo is very light as was common. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $38.00
  • 220 Globe Used Old Red Logo - G42

    This used globe will fit models 220, 228, 290, 290A, 295 and 235. It measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. The globe may have minor imperfections or scratches from use, but no cracks.

    Not rated yet
    • $20.50
  • Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.15
  • Large Valve Stem Packing - P1

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

    Almost all lantern models use this packing such as 200, 200A, 201, 236, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

    Same part as part number 242-6201. Made of 100% graphite. 

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $3.25
  • Ball Nut - S59

    Single Ball Nut. Fits all Coleman lanterns except the 242 type models.

    Not rated yet
    • $3.00
  • Fuel Air Tube - E12

    Fuel air tube for model 220 & 228 through B through K lanterns.

    Not rated yet
    • $9.00
  • Large Valve Stem Packing - P1

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

    Almost all lantern models use this packing such as 200, 200A, 201, 236, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

    Same part as part number 242-6201. Made of 100% graphite. Same as part number 118B6201 and 118D6201. 



    Not rated yet
    • $3.25
  • Pump Clip - S90

    Pump Clip
    Not rated yet
    • $3.00
  • Coleman Decal 220/228C - D33

    Coleman Instruction Decal for 220C 228C Lanterns 1945 to 1946 & Some 220D & 228D Lanterns
    Not rated yet
    • $3.25
  • Tip Cleaner Stem Reproduction - R259

    This is a reproduction tip cleaner stem for the model 220/228B through 220/228F lantern. Looks a little different that the original but is a great lower cost alternative to the original ones.

    Not rated yet
    • $7.75
  • Mixing Chamber New Style Plated - E189

    This is a newer style mixing chamber for the 220-228 series lanterns. It is plated with a zinc coating or something similar.
    Not rated yet
    • $4.00
  • Filler Cap 3 Piece Brass Used - E63

    Used Cap. Has a new gasket and steel screw.  Shows signs of wear. Could be any combination of the following; wrench marks, oxidization, or fading.

    Not rated yet
    • $12.00
  • Collar 220E Transitional Used - 5

    This is a used collar for the transitional 220E. Ribbed like a 220F collar but stamped 220E.
    Not rated yet
    • $4.00
  • Valve Assembly Used - E16

    This is a used valve assembly for the models 220/228B through 220/228F lanterns. It has been cleaned. New valve packing has been installed. It is ready for use and should work as well as a new one.

    Not rated yet
    • $9.00
  • Ventilator 220H Used #30

    This is a used ventilator. It will fit model 220F through 220H. It is chip free and in great shape.
    Not rated yet
    • $25.00
  • Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one. If your filler cap has a screw in the center of it then this gasket will not work. Filler cap is shown for illustration purposes only and is not included.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.20
  • 220D Decal - D43

    This is the decal used on the early painted 220D/228D transitional lantern.
    Not rated yet
    • $3.25
  • 220 Metal Parts Safe Used - E978

    Used metal parts safe for the 220/228 lantern. Great for storing extra mantles, generator, matches or anything else. These are used but function as intended. Some may show signs of rust. Lantern not included.

    Not rated yet
    • $18.00
  • Mixing Chamber New Style Brass - E328

    Newer style mixing chamber for the model 220/228 lanterns. It is brass with no coating.
    Not rated yet
    • $6.00
  • Generator Tube Packing - P5

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $2.30
  • Globe 220 Red Sunrise - G53

    Used red sunrise globe used on Canadian lanterns. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $69.00
  • Eccentric Block - Used - E56

    Used Eccentric Block 


    Not rated yet
    • $4.00
  • Nut For 220/288 New - E133

    Frame hold down nut for 220/228B through 220/228F lantern burner assembly. Also for many other Coleman applications.

    Not rated yet
    • $3.00
  • Screw Flat Head - S76

    Screw for tip cleaner assembly to air intake tube. Flat head screwdriver type used on earlier 220/228 models.

    Not rated yet
    • $0.25
  • Eccentric Block - S79

    Eccentric Block

    Not rated yet
    • $5.00
  • Fuel Cleaner Needle - E160

    New Old Stock - Needle for the fuel and air tube inside the fount.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $6.00
  • Gas Tip Used - GT1

    Used Gas tip.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $5.00
  • Burner Tube Brass 2 7/8 - E36

    Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.
    Not rated yet
    • $4.00
  • Ball Nut 2 Pack - C16

    Ball Nut 2 Pack.
    Not rated yet
    • $5.00
  • 220 Filler Cap Insert - S29

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $6.00
  • Air Intake Tube Steel - E193

    This is a steel tube. Not brass.
    Not rated yet
    • $9.00
  • Vent Rod 220 Long - S98

    Longer vent rod for models 220/228B through 220/228E and 235.

    Not rated yet
    • $6.00
  • New Filler Cap Brass - C4

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $7.85
  • Push On Nut Small - S75

    Push on nut for pump. The small push on nut is used with leather pump cups.
    Not rated yet
    • $3.00
  • Generator Nut - S52

    Generator nut.

    Not rated yet
    • $4.50
  • 220 Globe Clear - G4

    This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. New part number 2000026613.

    Not rated yet
    • $14.50
  • Filler Cap Tire Valve Nickel - R218

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $12.70
  • Filler Cap Tire Valve Brass - R261

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $11.40
  • Ventilator 220F Used #4

    This is a used ventilator. It will fit model 220F. The 220F vent is slightly smaller than the 220H through 220K vent and may not fit those models. It has the chips shown.
    Not rated yet
    • $5.00
  • Ventilator 220F Used #5

    This is a used ventilator. It will fit models 220F. The 220F vent is slightly smaller than the 220H through 220K vent and may not fit those models. This vent has wear as shown.
    Not rated yet
    • $23.00
  • Ventilator 220F Used #9

    This is a used ventilator. It will fit models 220F. The 220F vent is slightly smaller than the 220H through 220K vent and may not fit those models. This vent has the chips shown.
    Not rated yet
    • $12.00
  • Ventilator 220F Used #10

    This is a used ventilator. It will fit models 220F. The 220F vent is slightly smaller than the 220H through 220K vent and may not fit those models. This vent has the chips shown.
    Not rated yet
    • $5.00
  • Burner Cap 220 Steel Hex - E70

    Steel burner cap for most models of double mantle lanterns and lamps. Has hex head for easy installation and removal.

    Not rated yet
    • $3.00
Products: 150 of 86
Show: 50