220F

Products: 150 of 115
Show: 50
  • Rebuild Kit - 220 & 228 Lanterns - K2

    Rebuild kit for both the 220 and 228 Coleman lanterns. Cures most troubles.

    Includes:

    • 4 Coleman string tie mantles for your lantern
    • 1 Coleman generator
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 2 Cap Gaskets - for the bottom of your fuel cap. 1 each of the two possible types needed

    See Diagram in "Description" under photo at bottom left of this page

    Not rated yet
    • $30.25
  • Two Mantle Direction Disk USA Reproduction - S86
    • Free Shipping

    Two Mantle Direction Disk USA Reproduction - S86

    New reproduction direction disk for the many of the 2 mantle lanterns made in the USA like the 220 and 228 models B thru F. These are aluminum and look and feel identical to the original, and they are made here in the USA. They come with a protective plastic coating that can be removed before installation.

    This disc refers to "mantles" as opposed to "mantle" for a single mantle lantern.

    Not rated yet
    • $6.35
  • Leather Pump Cup Dry - S116

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of dry leather.

    Not rated yet
    • $3.25
  • Window Decal - Sunrise Green - D105
    • Free Shipping

    Window Decal - Sunrise Green - D105

    Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

    Decal is 2" tall by 3.5" wide.

    Instructions:

    1. Pull off back side solid paper - pull at a sharp angle
    2. Apply to clean and dry window or hard surface
    3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
    4. Carefully peel off clear plastic - also at a sharp angle
    Not rated yet
    • $5.50
  • Check Valve O Ring - S36
    • Free Shipping

    Check Valve O Ring - S36

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.00
  • Window Decal - Lantern Red - D102
    • Free Shipping

    Window Decal - Lantern Red - D102

    Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

     

    Decal is 2.5" tall by 2" wide.

    Instructions:

    1. Pull off back side solid paper - pull at a sharp angle
    2. Apply to clean and dry window or hard surface
    3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
    4. Carefully peel off clear plastic - also at a sharp angle
    Not rated yet
    • $4.50
  • Sparker Flints Zippo - E281

    Zippo brand Flints for the Coleman Lantern Spark Igniter.

    Not rated yet
    • $4.25
  • Generator Lantern - C2

    New generator for 220, 228, 275, and similar Sears lanterns. New generator includes new gas tip, spring, and tip cleaning wire. Same generator as the old part number T44. Same as new part number 3000005090.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $16.35
  • Mantle String Tie #21 2 pack - M3

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $3.45
  • 220 Globe Green Sunrise Logo - G24
    • New!

    220 Globe Green Sunrise Logo - G24

    This is an original used green sunrise logo globe made between 1946 and 1959. Although used, it has been inspected for damage or defects. The light green logo is very light as was common. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Some of the markings are very light and hard to see.

    Not rated yet
    • $35.00
  • Mantle String Tie #21 4 Pack - M2

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $6.45
  • 220 Red Logo Replacement globe USA - G22
    • New!

    220 Red Logo Replacement globe USA - G22

    This is a US made replacement globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Not rated yet
    • $24.00
  • Peerless Mantles 2C-HG - M1

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $5.20
  • Peerless Mantles 24-A - M4

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.70
  • 220 Globe 1936-1945 - G72

    This is an original used globe made between 1936 to 1945 for Coleman lanterns that used the 220 size globe. Although used, it has been inspected for damage or defects. Please note that the green straight line logo used on these globes was very lightly stamped and can sometimes be difficult to see. This was normal for the time period. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $40.00
  • 220 White Logo USA Globe - G63

    USA made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $24.00
  • Globe 220 Red Sunrise - G23

    Used red sunrise globe used on Canadian lanterns. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $45.00
  • Eccentric Block - S137

    Eccentric Block

    Not rated yet
    • $7.00
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.15
  • Large Valve Stem Packing - P1

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

    Almost all lantern models use this packing such as 200, 200A, 201, 236, 242, 242A, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

    Coleman made the same product under two different part numbers. This is the same as part number 242-6201. 

    Made of 100% graphite. 

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $3.25
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.45
  • Leather Pump Cup And Back-Up Plate - C6

    Leather pump cup, push on nut and back-up plate. New part number 3000005094.

    Not rated yet
    • $5.95
  • Ball Nut - S9

    New Single Ball Nut. Fits all Coleman lanterns except the 242 type models.

    Not rated yet
    • $3.00
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $7.40
  • Valve Stem Assembly NOS - E105
    • New!

    Valve Stem Assembly NOS - E105

    Valve stem assembly for 220C, D and E.

    Not rated yet
    • $24.00
  • Push On Nut Small - S4
    • Free Shipping

    Push On Nut Small - S4

    Push on nut for end of pump rod. The small push on nut is used with leather pump cups.

    Not rated yet
    • $3.00
  • Large Valve Stem Packing - P1

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

    Typically used to stop a fuel leak from the valve stem on older appliances.

    Almost all lantern models use this packing such as 200, 200A, 201, 236, 242, 242A, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

    Coleman made the same product under two different part numbers. This is the same as part numberc 118B6201 and 118D6201. 

    Not rated yet
    • $3.25
  • Pump Clip - S22
    • Free Shipping

    Pump Clip - S22

    Pump Clip

    Not rated yet
    • $3.00
  • Tip Cleaner Stem Reproduction - R244

    This is a reproduction tip cleaner stem for the model 220/228B through 220/228F lantern. Looks a little different that the original but is a great lower cost alternative to the original ones.

    Not rated yet
    • $8.75
  • Vent Rod 220 Short - S148

    Shorter vent rod for models 220/228F through 220K

    Not rated yet
    • $5.00
  • Mixing Chamber New Style Plated - E189

    This is a newer style mixing chamber for the 220-228 series lanterns. It is plated with a zinc coating or something similar.
    Not rated yet
    • $4.00
  • Black Valve Wheel New Style USED - S78
    • New!

    Black Valve Wheel New Style USED - S78

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    Not rated yet
    • $8.50
  • Ball Nut Used - S18

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    Not rated yet
    • $2.75
  • Pump Clip Used - S17
    • Free Shipping

    Pump Clip Used - S17

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    Not rated yet
    • $1.50
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one. 

    If your filler cap has a screw in the center of it then this gasket will not work. 

    The red filler cap is shown for illustration purposes only and is not included.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.20
  • 220/228 Valve Bushing Set - S131

    This is the set of bushings used on both sides of the graphite packing on the valve stem of the 220/228B through 220/228K lanterns.

    Not rated yet
    • $5.85
  • Push On Nut Large - S1
    • Free Shipping

    Push On Nut Large - S1

    Push on nut for pump. The large push on nut is used with the neoprene pump cup.

    Not rated yet
    • $3.00
  • Mixing Chamber New Style Brass - E328
    • New!

    Mixing Chamber New Style Brass - E328

    Newer style mixing chamber for the model 220/228 lanterns. 

    Not rated yet
    • $7.50
  • Generator Tube Packing - P5

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $2.30
  • Screw Flat Head - S71

    Screw for tip cleaner assembly to air intake tube. Flat head screwdriver type used on earlier 220/228 models.

    Not rated yet
    • $0.25
  • Gas Tip Used - GT1
    • New!

    Gas Tip Used - GT1

    Used Gas tip.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $3.00
  • Air Stem Used Old Style - S31
    • New!

    Air Stem Used Old Style - S31

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $4.50
  • Check Valve With Stem - C1
    • New!

    Check Valve With Stem - C1

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. Comes with the new O ring. If your part diagram calls for the 242B5381 check valve then this would be the correct part.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $8.65
  • Burner Tube Brass 2 7/8 - E36

    Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

    Not rated yet
    • $4.00
  • Ball Nut 2 Pack - C16

    Ball Nut 2 Pack.

    Not rated yet
    • $5.40
  • Air Intake Tube Steel - E193

    This is a steel tube. Not brass.

    Not rated yet
    • $9.00
  • Tip Cleaner Stem NOS - E198
    • New!

    Tip Cleaner Stem NOS - E198

    NOS tip cleaner stem.

    Not rated yet
    • $26.00
  • New Filler Cap Brass - C4
    • New!

    New Filler Cap Brass - C4

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $8.85
  • Collar 220F Used - X3

    This is a used collar for the 220F lantern.

    Not rated yet
    • $0.50
  • Generator Nut - S176

    Generator nut.

    Not rated yet
    • $5.40
Products: 150 of 115
Show: 50