220H

Products: 150 of 95
Show: 50
  • Rebuild Kit - 220 & 228 Lanterns - K2

    Rebuild kit for both the 220 and 228 Coleman lanterns. Cures most troubles.

    Includes:

    • 4 Coleman string tie mantles for your lantern
    • 1 Coleman generator
    • 1 Leather replacement pump cup for the bottom of the thumb operated air pump
    • 1 Valve Stem Packing for sealing fuel leaks around the fuel valve
    • 2 Cap Gaskets - for the bottom of your fuel cap. 1 each of the two possible types needed

    See Diagram in "Description" under photo at bottom left of this page

    Not rated yet
    • $30.25
  • Sparker Flints Zippo - E281

    Zippo brand Flints for the Coleman Lantern Spark Igniter.

    Not rated yet
    • $4.25
  • Generator Lantern - C2

    New generator for 220, 228, 275, and similar Sears lanterns. New generator includes new gas tip, spring, and tip cleaning wire. Same generator as the old part number T44. Same as new part number 3000005090.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $16.35
  • 220 Globe Green Sunrise Logo - G24
    • New!

    220 Globe Green Sunrise Logo - G24

    This is an original used green sunrise logo globe made between 1946 and 1959. Although used, it has been inspected for damage or defects. The light green logo is very light as was common. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Some of the markings are very light and hard to see.

    Not rated yet
    • $35.00
  • 220 Red Logo Replacement globe USA - G22
    • New!

    220 Red Logo Replacement globe USA - G22

    This is a US made replacement globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Not rated yet
    • $24.00
  • 220 Globe 1936-1945 - G72

    This is an original used globe made between 1936 to 1945 for Coleman lanterns that used the 220 size globe. Although used, it has been inspected for damage or defects. Please note that the green straight line logo used on these globes was very lightly stamped and can sometimes be difficult to see. This was normal for the time period. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $40.00
  • 220 White Logo USA Globe - G63

    USA made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $24.00
  • Globe 220 Red Sunrise - G23

    Used red sunrise globe used on Canadian lanterns. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $45.00
  • Mantle String Tie #21 2 pack - M3

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $3.45
  • Mantle String Tie #21 4 Pack - M2

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $6.45
  • Peerless Mantles 2C-HG - M1

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $5.20
  • Peerless Mantles 24-A - M4

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.70
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.15
  • Large Valve Stem Packing - P1

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

    Almost all lantern models use this packing such as 200, 200A, 201, 236, 242, 242A, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

    Coleman made the same product under two different part numbers. This is the same as part number 242-6201. 

    Made of 100% graphite. 

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $3.25
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.45
  • Leather Pump Cup And Back-Up Plate - C6

    Leather pump cup, push on nut and back-up plate. New part number 3000005094.

    Not rated yet
    • $5.95
  • Ball Nut - S9

    New Single Ball Nut. Fits all Coleman lanterns except the 242 type models.

    Not rated yet
    • $3.00
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $7.40
  • Eccentric Block - E28
    • 17% less

    Eccentric Block - E28

    Eccentric Block for the model 220/228H, 220/228J, and 220K lantern.
    Not rated yet
    • $3.00
  • Tip Cleaner Stem - E43

    Tip cleaner stem for the model 220 & 228H through K model lanterns.

    Not rated yet
    • $8.00
  • Push On Nut Small - S4
    • Free Shipping

    Push On Nut Small - S4

    Push on nut for end of pump rod. The small push on nut is used with leather pump cups.

    Not rated yet
    • $3.00
  • Large Valve Stem Packing - P1

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

    Typically used to stop a fuel leak from the valve stem on older appliances.

    Almost all lantern models use this packing such as 200, 200A, 201, 236, 242, 242A, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

    Coleman made the same product under two different part numbers. This is the same as part numberc 118B6201 and 118D6201. 

    Not rated yet
    • $3.25
  • Pump Clip - S22
    • Free Shipping

    Pump Clip - S22

    Pump Clip

    Not rated yet
    • $3.00
  • Collar 220H Used - X29

    220H collar. This is a used collar and may show signs of wear.

    Not rated yet
    • $3.00
  • Burner Cap 220 Steel Hex - E70

    Steel burner cap for most models of double mantle lanterns and lamps. Has hex head for easy installation and removal.

    Not rated yet
    • $3.00
  • Mixing Chamber 220J - E163

    This is a mixing chamber for the model 220-228J and 220K lanterns. It would also be correct for later 220-228H lanterns. Comes with the new vent rod.
    Not rated yet
    • $5.00
  • Burner Tube Steel - E162

    Steel burner tube for the 220-228 series lanterns. Measures approximately 2 7/8 inches long.

    Not rated yet
    • $3.00
  • Parts Safe Gasket 220 - E62

    This is a new gasket for your metal snap on parts safe. Fits the 220 size metal safe.

    Not rated yet
    • $4.00
  • Black Valve Wheel New Style USED - S78
    • New!

    Black Valve Wheel New Style USED - S78

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    Not rated yet
    • $8.50
  • Used Generator Nut - S26

    Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

    Not rated yet
    • $2.00
  • Pump Clip Used - S17
    • Free Shipping

    Pump Clip Used - S17

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    Not rated yet
    • $1.50
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one. 

    If your filler cap has a screw in the center of it then this gasket will not work. 

    The red filler cap is shown for illustration purposes only and is not included.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.20
  • Washer Plate Used - E192

    Used frame plate for the model 220/228J lantern. Has been cleaned but may show signs of light wear. It will not be heavily rust pitted.

    Not rated yet
    • $1.00
  • 220/228 Valve Bushing Set - S131

    This is the set of bushings used on both sides of the graphite packing on the valve stem of the 220/228B through 220/228K lanterns.

    Not rated yet
    • $5.85
  • Push On Nut Large - S1
    • Free Shipping

    Push On Nut Large - S1

    Push on nut for pump. The large push on nut is used with the neoprene pump cup.

    Not rated yet
    • $3.00
  • Generator Tube Packing - P5

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $2.30
  • Gas Tip Used - GT1
    • New!

    Gas Tip Used - GT1

    Used Gas tip.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $3.00
  • Air Stem Used Old Style - S31
    • New!

    Air Stem Used Old Style - S31

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $4.50
  • Check Valve With Stem - C1
    • New!

    Check Valve With Stem - C1

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. Comes with the new O ring. If your part diagram calls for the 242B5381 check valve then this would be the correct part.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $8.65
  • Ball Nut 2 Pack - C16

    Ball Nut 2 Pack.

    Not rated yet
    • $5.40
  • New Filler Cap Brass - C4
    • New!

    New Filler Cap Brass - C4

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $8.85
  • Generator Nut - S176

    Generator nut.

    Not rated yet
    • $5.40
  • Neoprene Pump Cup And Nut - C11

    Brand new Neoprene Pump Cup with a large push on nut made by Coleman. Fits pretty much all Coleman Stoves And Lanterns.

    Not rated yet
    • $4.25
  • 220 Globe Clear - G4

    This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. New part number 2000026613.

    Not rated yet
    • $14.95
  • Decal - Fits 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns - D11
    • Free Shipping

    Decal - Fits 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns - D11

    White Border Logo with "Reg.", & "Lantern". For 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns - Also fits 502 stove.



    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $3.25
  • Filler Cap 3 Piece Red Used - E310
    • New!

    Filler Cap 3 Piece Red Used - E310

    This cap will fit most models of lanterns. It is a used cap and will have some missing paint with the brass showing through in places. Has a new cap gasket installed.

    Not rated yet
    • $12.00
  • Filler Cap Tire Valve Nickel - R218

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $12.70
  • Filler Cap Tire Valve Brass - R236

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $11.40
  • Ventilator 220F Used #8

    This is a used ventilator. It will fit model 220F. The 220F vent is slightly smaller than the 220H through 220K vent and may not fit those models. This vent has the chips shown.

    Not rated yet
    • $18.00
  • Burner Cap 220 Brass Hex - S92

    Brass burner cap with hex head for easy installation and removal. Fits most models of double mantle lanterns and lamps.

    Solid brass with stainless steel screen.

    Not rated yet
    • $4.75
Products: 150 of 95
Show: 50