242A

Zippo brand Flints for the Coleman Lantern Spark Igniter.

These come in a pair of 2. They are new stainless steel washers that go under the burner frame on all 200 and 242 lanterns. Identical size as the originals.

New 200 burner frame Pal Nut is HERE.

New 200 burner frame Nut is HERE.

Coleman's Most Popular Sized Mantles. 2 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. 

Typically used to stop a fuel leak from the valve stem on older appliances.

Almost all lantern models use this packing such as 200, 200A, 201, 236, 242, 242A, 242B, 242C, all the 220 and 228 models plus many others. If you need to check your model, please see the PARTS DIAGRAM PAGE.

Coleman made the same product under two different part numbers. This is the same as part numberc 118B6201 and 118D6201. 

This small gasket is for the model 242, 242A, 242B, 242C, 243, 243A, 234, 234A, 247, 249 and other similar lanterns and lamps that take the smaller filler cap. 

Also fits the model 500 stove. The green filler cap is shown for identification purposes only and is not included.

Generator nut.

This is an used original old red letter logo globe used on lanterns from 1960 to 1980. Although used it will be in good condition. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

Coleman's Most Popular Sized Mantles. 4 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Ceramic burner cap for the 242 and 200A series lanterns.

This is a brand new clear globe that will fit models 200, 200A, 200B, 201, 202, 242A, 242B, 242C, 243, 243A, 234, 247, 249, 5101, 5120, 5121 and 5122. 

Top and bottom opening is 3-1/2", bulge width is 4-1/2" and is 4-1/16" tall.

Has also been reported to fit Austromax “Aussie Bush Light” very well.

Pump Cup Neoprene for most lanterns

Reproduction check valve for 242, 242A, 242K, 243 and 243A lanterns. This is the re-buildable type check valve for early single mantle lanterns that did not use an air stem. Will not work with others.

Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

This replacement screen will fit the burner caps used on 242 and 200/200A model lanterns.

This is a used old Pyrex Bernz-o-matic globe. It is the same size as a Coleman 200A globe. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

Reproduction brass ball nut for the model 242 series lanterns. Look identical to the originals.

Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

New filler cap screw for the small 242 & 249 lanterns and 500 stove size filler caps.

Reproduction brass vent rod for the models 234, 242A, 242B, 242C, 247, 249, and similar style lanterns. Will not fit the Australian made 249 lantern.

This is a used USA made white letter replacement logo globe. Although used, it will be in good condition. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

Handy little part invented by a lantern collector. Replaces the fuel and air tube on a model 200A lantern to a straight pick up tube for kerosene. Just remove the fuel tube and screw on. Also fits a 242 series lantern.

New rubber pip for the re-buildable type check valve used on the 242 and 242A lantern. Also for the NRV on the model 1950 stove.

This is a reproduction white letter Germany made logo globe. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, 241, 247, and 249.

New reproduction pump cup assembly for 242 NL (No Letter), 242A , 243 , 246 and or any Coleman lantern or stove from the early 30's with a solid pump stem with no air hole in the middle. These are made for the USA manufactured Coleman pump shafts and will fit as they should. If yours is made in Canada, you will have to use a small file to widen the brass center to a cone shape to match your pump shaft - see the photos.

This is a used Burner frame for the 242A through C lantern. Will also work on the 247 and other similar lanterns. Has a chipped/worn burner cap. 

This is a used fount for the model 242 Lantern. This has some paint chipping, decent shape, no dents.

New burner cap for the model 242 series lanterns. Also fits the 200, 200A, 202, 243, and 247 lanterns.

Solid brass with stainless steel screen.

Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. 

These simply slide on and you cross the wires instead of tying strings - very quick to install.

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Stainless Steel burner frame to valve nut for the 200, 200A, 201 and 202 lanterns. Also used on some stoves.

Need the washers for under a 200 or 200A frame? Look HERE.

Used gas tip for 200A5891 generator. Also works well for using on the 220 generators when doing a kerosene conversion.

This is a U.S. made early green sunrise logo globe used on lanterns from 1946 to 1962. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249. The darkness of the green will vary from globe to globe. The printing was not done with the technology of printing in our current era. 

Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss white in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - flat black in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Small thin O ring for the common Coleman check valves. Made of gas resistant material.

Used generator spring for 200, 200A, 242, 243, 202 & Similar Sears Lanterns.

Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2" tall by 3.5" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2" tall by 3.5" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss white in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2" tall by 3.5" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

This is a new unmarked straight globe that will fit many single mantle lanterns. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249. This is not an original glass, but a straight sided globe with no markings of any kind. Glass measures 3 1/2" Wide X 4" Tall.