295

Products: 150 of 94
Show: 50
  • Peerless Mantles 2C-HG - M01

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $6.55
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • Check Valve With Stem - C001

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. These are the updated design that uses a smaller head on the air stem. You won't need your current air stem any more as this comes with a new one that is updated and replaces your old one. 

     If your part diagram calls for the 242B5381 or a 621-5361 check valve, then this would be the correct part. It is also known as part number 2006381ZCL.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $11.75
  • Generator Tube Packing - P05

    This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $2.50
  • Peerless Mantles 24-A - M04

    These Peerless mantles work well on single mantle lanterns. Made in India. They are the same size as the Coleman 99 mantles. A little bigger than the 2C-HG mantles but not as big as the 111 mantles. 2 per pack.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $4.10
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Not rated yet
    • $3.55
  • Mantle String Tie #21 4 Pack - M02

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004344.

    Not rated yet
    • $7.45
  • Filler Cap, Brass - C004

    This is a new brass one piece filler cap made by Coleman. Comes with a new gasket and will fit most all lanterns and stoves other than the model 242 lantern and 500 stove that have the smaller filler caps. 

    It is also known as part number 425A1405.

    Not rated yet
    • $9.60
  • Spark Igniter - E1273

    New Coleman made Spark Igniter. Comes in new packaging with instructions.

    Not rated yet
    • $14.45
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004345.


    Not rated yet
    • $4.95
  • Pump Assembly, Universal - C006

    This is a replacement pump assembly, made by Coleman for most stoves and lanterns except for the small Peak 1 type products that have a shorter pump rod.
    This pump comes with the neoprene pump cup and has parts you can exchange to match your existing type.


    Not rated yet
    • $10.41
  • Valve Wheel Screw - S77

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-059 is needed.

    Not rated yet
    • $1.00
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $5.75
  • Pump Cup, Neoprene - C019

    This is a new Coleman made replacement pump cup  for all lanterns that came with the rubber style.

    Not rated yet
    • $3.55
  • Check Valve O Ring - S20
    • Free Shipping

    Check Valve O Ring - S20

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Pump Clip, Used - S100
    • Free Shipping

    Pump Clip, Used - S100

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    Not rated yet
    • $2.00
  • Ball Nut, 2 Pack - C011

    These are a new Coleman made 2 pack of ball nuts. This is the common sized ball nut used on most Coleman lanterns.
    Also known as part number 3000005384.

    Not rated yet
    • $5.85
  • Ball Nut Used - S101

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    Not rated yet
    • $3.00
  • Small Push On Nut for Leather Cups, NOS - E1152
    • Free Shipping

    Small Push On Nut for Leather Cups, NOS - E1152

    Push on nut for end of pump rod. The small push on nut is used with leather pump cups.

    Not rated yet
    • $4.25
  • Pump Clip - R580
    • Free Shipping

    Pump Clip - R580

    Pump Clip

    Not rated yet
    • $3.25
  • Feed Tube Assembly - C23

    Fits all 290 and 295 model lanterns

    Not rated yet
    • $6.90
  • Pump Assembly Leather Used Square Nut - U810

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $13.50
  • O-Ring - S21
    • Free Shipping

    O-Ring - S21

    Fits the fuel tube on all appliances that have a plastic fuel and air tube.  

    Models: 214, 282, 285, 288, 290, and 295.

    Also fits: 

    • The fuel tube on the 550B stove
    • On the propane regulator of a model 2000004489 Perfect Flow Skillet (reported by a fellow Coleman user). Propane regulator #9933-5251
    Not rated yet
    • $1.45
  • Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $14.10
  • Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $15.20
  • Pump Cup & Nut, Neoprene - C008

    Brand new Coleman made neoprene pump cup with a large push on nut made by Coleman. Fits pretty much all Coleman Stoves And Lanterns.
    Also known as part number 6391091

    Not rated yet
    • $4.75
  • 290/295 Heat Shield - C42

    These fit all 290 and 295 model lanterns.
      - The 290 was originally made with a full frame and did not come with a heat shield, so this version is a bit of work to get installed. Once in place, it ends up covering the lighting holes in the bottom of the frame - FYI.
      - On a 290A and 295, you will need to replace the frame bottom also if yours has riveted in springs.

    Not rated yet
    • $7.70
  • U Clip - S11
    • Free Shipping

    U Clip - S11

    Fits model 214, 220K, 228K, 282, 285, 286, 288, 290, & 295 lanterns. 

    Same as part number 206A1251

    Not rated yet
    • $3.25
  • 220 Globe White Letter Germany - G05

    German made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $20.90
  • 220 Red Logo Replacement Globe USA - G22
    • New!

    220 Red Logo Replacement Globe USA - G22

    This is a US made replacement globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Not rated yet
    • $24.50
  • Large Push On Nut for Neoprene Cups - S09
    • Free Shipping

    Large Push On Nut for Neoprene Cups - S09

    Push on nut for pump. The large push on nut is used with the neoprene pump cup.

    Not rated yet
    • $3.25
  • Generator - 290/295 - C014

    This is a new Coleman made generator for Model 290, 290A and 295 Lantern. Each includes new gas tip, spring, and cleaning needle.
    This generator can be used on the 290 series lanterns, but you will have to use your original generator nut instead of the new one that comes with this generator. The 290 generators have been discontinued.  
    These are also known as part number 3000005404 and replaces the 290 & 290A part number of 290-5891.

    Not rated yet
    • $19.05
  • Pump Assy Leather Used Push On Nut - U811

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $12.00
  • Generator Tube Packing, Used - S116

    Used cardboard tube that goes inside of the 200A and 220 size generators, and many others. 

    Not rated yet
    • $1.00
  • Knob Assembly - C65

    Knob for the 282, 286, 288, 290, 295, and 639 lanterns. May fit others also.

    Not rated yet
    • $5.70
  • Mantles, Insta-Clip #21, 2 pack - M12

    Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. 

    These simply slide on and you cross the wires instead of tying strings - very quick to install.

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $4.05
  • Sparker Flints Zippo - R508

    Zippo brand Flints for the Coleman Lantern Spark Igniter.

    Not rated yet
    • $4.60
  • Filler Cap Green Used - U803

    This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear. Comes with a new gasket for you to install.

    Not rated yet
    • $9.00
  • Pump Assembly, Universal - C45

    Universal pump assembly with leather cup that fits almost all Coleman lanterns and stoves. Does not fit the small Peak 1 lanterns or stoves, some older style pumps found on QuickLites and similar lanterns/stoves where the pump cap does not have the clip that holds it onto the fount. Replaces part number 242D5201

    Not rated yet
    • $13.35
  • Coleman Filter Funnel - C24

    New Filter Funnel For Lamps And Stoves. 

    Stops filling your lantern or stove at the correct level.

    Not rated yet
    • $12.45
  • Filler Cap Gray Used - E1307

    This is a used one piece filler cap. Paint may be chipped or missing andwill vary in wear. Gray in color like the new production Dual Fuel models. Includes a new gasket for you to install.

    Not rated yet
    • $9.00
  • Filler Cap 3 Piece Red Used - U800

    This is for one used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by handing out the ones in best shape first. 

    We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.

    Comes with a new gasket that you will have to install.

    Not rated yet
    • $14.00
  • Aluminum Funnel Small - R503

    This is a new aluminum filler funnel. Small and easy to pack. See its size in the last photos where it is being used on a fount. Works well for standard sized filler caps. Will not work for the smaller filler caps on models 242, 243, 247, 249 lanterns with the smaller cap or the 500 stove.

    Not rated yet
    • $5.50
  • Ball Nut, Splined, Used- S97

    Single Ball Nut. Fits all Coleman lanterns except the 242 type models.

    Not rated yet
    • $6.00
  • Generator Tube Packing - 10 PACK - P05๐Ÿ”Ÿ

    This is a 10 PACK of the cardboard tube that goes inside of the 200A and 220 size generators, and many others.

    Not rated yet
    • $22.50
  • 220 Red Logo Pyrex Globe USA - G28

    This is a US made original globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. These are used globes but in very nice shape.