639
639-700
-
Check Valve With Stem - C01
This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. Comes with the new O ring. If your part diagram calls for the 242B5381 or a 621-5361 check valve then this would be the correct part. The latest part number for this is 2006381ZCL.
-
220 Filler Cap Insert - S144
This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.
-
Valve Wheel Screw - S72
Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-058 is needed.
-
Heat Shield Clip - Used - S104
Heat shield clip for older style heat shields and for the 200B, 214, 282, 285, 290 and 295. Also works well as a pre-heater cup clip on kerosene lanterns.
-
-
-
Filler Cap Gasket for 1 Piece Cap - S42
This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one.
If your filler cap has a screw in the center of it then this gasket will not work.
The red filler cap is shown for illustration purposes only and is not included.
-
Heat Shield 4 - E1233
Unknown heat shield. I do not know what it fits. It has a 2 7/8 inch diameter not counting the legs.
Someone thinks they have identified this heat shield, here is what they said:
It may be off a Coleman 639 Kerosene. Looks very similar and appears to have the notches in right places. It’s “dished” like a 639 heat shield and also has the “ledge” to hold the pre-heat cup level. (From Greg in Australia)
-
Burner Cap & Screen - S95
New burner cap for 621, 635 and 639 lanterns. Solid brass with stainless steel screen.
-
Check Valve O Ring - S36
Small thin O ring for the common Coleman check valves. Made of gas resistant material.
-
Pump Assembly Neoprene Used - E1002
Used pump assembly for most stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup.
-
Spring Clip (Preheater Cup) - S181
Spring Clip for 249 Preheater Cup. This is an exact reproduction. Fits well also on the 200, 202 frames also - see photos.
-
Generator 639 - C28
Generator for the 639 Lantern. New generator includes new gas tip, spring, and tip cleaning wire.
-
Peerless Mantles 111 - M05
These Peerless mantles are the same size as Coleman #11 mantles. Made in India. For lantern model numbers: 206, 236, 237, 333, 555, 621, 625, 635, and 639. These are the larger mantles, suitable for 500 candlepower lanterns.
-
Globe 237 Clear - G06
This globe will fit models 236, 237, 237A, 237B 635, 639, 639A, 639B, and 639C.
-
-
New Filler Cap Brass - C04
New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove.
Has gone in the past by part numbers 220C1401, and now 425A1405
-
Generator Nut Used - S113
Used Generator nut for the model 214, 222, 229, 286, 288 290, 635 and 639 lanterns.
-
Neoprene Pump Cup And Nut - C08
Brand new Neoprene Pump Cup with a large push on nut made by Coleman. Fits pretty much all Coleman Stoves And Lanterns.
-
-
Filler Cap Green Used - E1248
This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear.
Comes with a new gasket.
-
Filler Cap Tire Valve Nickel - R301
This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.
-
Filler Cap Tire Valve Brass - R302
This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.
-
Filler Cap 3 Piece Green Used - E1265
This is a used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by picking out the ones in best shape first.
We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.
Comes with a new gasket NOT installed.
-
-
Filler Cap Light Gray Used - E1208
Used filler cap that fits most Coleman lanterns and stoves. Light gray in color like the early production Duel Fuel models. Paint is chipped or missing - each one will vary in wear.
Comes with a new gasket - not installed
-
-
Pre-Heater cup Small - C16
Smaller size pre-heater cup for the 201 lantern. Is 1 inch in diameter. The center hole is larger than needed for the 201 generator. Fits the 214 generator much better.
-
-
Filler Cap Red Used - E1252
This is a used one piece filler cap. Paint is chipped or missing, wear and shade of the filler caps varies.
Comes with a new gasket - not installed
-
Filler Cap Brass Used - E1210
This is a used one piece filler cap. Each one will vary in wear.
Comes with a new gasket - not installed
-
288 Knob Used - E1399
Used knob for the 282, 285, 286, 288, 290, 295, and 639 lanterns. May fit others also.