476.74070

  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    5.0
    Score: 5.0 (votes: 3)
    Reviews: 3
    • $3.85
    Sorry, we only have 4428 of that item available
  • Peerless Mantles 2C-HG - M01

    Most Popular Sized Mantles and are treated with Thorium from the factory. 4 mantles per pack. Use on these models: 200, 200A 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Will fit all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    5.0
    Score: 5.0 (votes: 3)
    Reviews: 3
    • $6.90
    Sorry, we only have 323 of that item available
  • Check Valve With Stem - C001

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. These are the updated design that uses a smaller head on the air stem. You won't need your current air stem any more as this comes with a new one that is updated and replaces your old one. 

     If your part diagram calls for the 242B5381 or a 621-5361 check valve, then this would be the correct part. It is also known as part number 2006381ZCL.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $12.80
    Sorry, we only have 254 of that item available
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $3.55
    Sorry, we only have 1090 of that item available
  • Generator for 220/228/275 - C002

    New Coleman made generator for 220, 228, 275, and similar Sears lanterns. The new generator includes new gas tip, spring, and tip cleaning wire.


    Will fit Coleman Lanterns: 220 B thru 220 K, 228 B thru K, 275 & 275A
    Fits Coleman Lamp Models 117A, 118A, 118B, 119A, 132A, 133, 143 and 150
    Fits Sears Lantern models 476.74060, 476.72212, 476.72213 and 476.74070

    This is the same generator as the old part number T44 and same as new part number 3000005090.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $22.75
    Sorry, we only have 150 of that item available
  • Mantle String Tie #21 4 Pack - M02

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004344.

    0.0
    Add first review
    Not rated yet
    • $7.45
    Sorry, we only have 160 of that item available
  • Filler Cap, Brass - C004

    This is a new brass one piece filler cap made by Coleman. Comes with a new gasket and will fit most all lanterns and stoves other than the model 242 lantern and 500 stove that have the smaller filler caps. 

    It is also known as part number 425A1405.

    0.0
    Add first review
    Not rated yet
    • $9.60
    Sorry, we only have 564 of that item available
  • Leather Pump Cup Kit - C005

    This is a new leather pump cup, push on nut and back-up plate. This will fit most all lanterns and stoves. Also known as part number 3000005094.

    0.0
    Add first review
    Not rated yet
    • $6.45
    Sorry, we only have 308 of that item available
  • Mantle String Tie #21 2 pack - M03

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Also known as part number 3000004345.


    0.0
    Add first review
    Not rated yet
    • $4.95
    Sorry, we only have 149 of that item available
    • Free USA Shipping

    Pump Clip, Used - S100

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 71 of that item available
  • Generator Nut, Used - S105

    Used generator nut for many Coleman models. These are in fine shape, just dirty.

    0.0
    Add first review
    Not rated yet
    • $2.50
    Sorry, we only have 213 of that item available
  • Filler Cap Insert, Reproduction - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    0.0
    Add first review
    Not rated yet
    • $9.95
    Sorry, we only have 148 of that item available
  • Ball Nut, Used - S101

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    0.0
    Add first review
    Not rated yet
    • $2.55
    Sorry, we only have 103 of that item available
  • Air Tube Screw - S72

    Screw for tip cleaner assembly to air intake tube. Flat head screwdriver type used on earlier 220/228 models.

    0.0
    Add first review
    Not rated yet
    • $0.25
    Sorry, we only have 395 of that item available
  • Bail Wrap Protector Black - R513

    This is 12 inches of new black plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.

    0.0
    Add first review
    Not rated yet
    • $1.50
    Sorry, we only have 100 of that item available
  • 220/228 Air Tube Screw Phillips - S74

    Screw for tip cleaner assembly to air intake tube. Phillips head screwdriver type used on later 220/228 models.

    This also works well as part number 335-0604 used on the burner frame/tube for the 335 lantern.

    0.0
    Add first review
    Not rated yet
    • $0.25
    Sorry, we only have 267 of that item available
    • Free USA Shipping

    Pump Clip - R580

    Pump Clip

    0.0
    Add first review
    Not rated yet
    • $3.25
    Sorry, we only have 350 of that item available
  • Pump Assembly Leather, Used, Square Nut - U810

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    0.0
    Add first review
    Not rated yet
    • $13.50
    Sorry, we only have 5 of that item available
  • Valve Wheel Black Old Style, Used - S113

    This is a used part and may show signs of wear. There may also be a few small chips in it. This is the old style black valve wheel for 200A, 202, 220D, 220E and 220F, and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. It is the solid back style.

    0.0
    Add first review
    Not rated yet
    • $11.00
    Sorry, we only have 32 of that item available
  • Filler Cap, Tire Valve, Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    0.0
    Add first review
    Not rated yet
    • $14.65
    Sorry, we only have 20 of that item available
  • Air Stem, Old Style, Used - S107

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    0.0
    Add first review
    Not rated yet
    • $2.00
    Sorry, we only have 193 of that item available
  • Black Valve Wheel New Style, Used - S112

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    0.0
    Add first review
    Not rated yet
    • $8.00
    Sorry, we only have 89 of that item available
  • Eccentric Block - E1039

    New reproduction eccentric Block for the 275, 235, 220/228 C, D, E and F models in addition to some lamps.

    0.0
    Add first review
    Not rated yet
    • $9.50
    Sorry, we only have 62 of that item available
  • Needle Assembly, Used - S99

    Used needle assembly for the 220E5891 generator. Will show signs of discoloration from being used, but will have a good needle. Used in all 220 and 228 model lanterns except for the slant valve models. Also used in lamps 118B, 132A, 133, & 143. Sears models 476.72213, 476.72212, & 476.74070.

    0.0
    Add first review
    Not rated yet
    • $4.50
    Sorry, we only have 8 of that item available
  • Metal Funnel Small - R503

    This is a new metal filler funnel. Small and easy to pack. See its size in the last photos where it is being used on a fount. Works well for standard sized filler caps. Will not work for the smaller filler caps on models 242, 243, 247, 249 lanterns with the smaller cap or the 500 stove.

    0.0
    Add first review
    Not rated yet
    • $5.50
    Sorry, we only have 94 of that item available
    • New!

    Bail Wrap Protector Clear - R512

    This is 12 inches of new clear plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.

    0.0
    Add first review
    Not rated yet
    • $1.50
    Sorry, we only have 214 of that item available
  • Tip Cleaner Stem Reproduction - R700

    This is a reproduction tip cleaner stem for the model 220/228B through 220/228F lantern. Looks a little different that the original but is a great lower cost alternative to the original ones.

    This also fits the AGM 2572 & Kamplite RL-3 

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $11.20
    Sorry, we only have 73 of that item available
  • Generator Lantern, Reproduction - R204

    Reproduction generator for 220, 228, 275, and similar Sears lanterns. New generator includes new gas tip, spring, and tip cleaning wire.

    0.0
    Add first review
    Not rated yet
    • $19.80
    Sorry, we only have 223 of that item available
  • Vent Rod 220 Long - R215

    Longer vent rod for models 220/228B through 220/228E and 235.

    0.0
    Add first review
    Not rated yet
    • $6.85
    Sorry, we only have 52 of that item available
  • 220 Globe White Letter Germany - G02

    German made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    0.0
    Add first review
    Not rated yet
    • $20.90
    Sorry, we only have 151 of that item available
  • Burner Tube Brass 2 7/8 - E1254

    Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

    0.0
    Add first review
    Not rated yet
    • $4.35
    Sorry, we only have 95 of that item available
    • New!

    Leather Pump Cup, Used - S115

    These are used leather pump cups that fit most lanterns and stoves. They may need some oil and conditioning, but are still flexible. This is the typical sized 7/8" pump cups for most lanterns and stoves.

    0.0
    Add first review
    Not rated yet
    • $1.00
    Sorry, we only have 12 of that item available
  • Pump Assembly, Universal - C045

    Universal pump assembly with a leather cup that fits almost all Coleman lanterns and stoves. 

    Does not fit the small Peak 1 lanterns or stoves, and also some older style pumps found on QuickLites and similar lanterns/stoves where the pump cap does not have the clip that holds it onto the fount. Replaces part number 242D5201

    0.0
    Add first review
    Not rated yet
    • $13.35
    Sorry, we only have 38 of that item available
  • Pump Assy Leather, Used, Push On Nut - U811

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    0.0
    Add first review
    Not rated yet
    • $12.00
    Sorry, we only have 11 of that item available
  • Check Valve Old Style Reproduction - R577

    This is reproduction of the older style of check valve that would take the original air stem with the larger end. Excellent craftsmanship on these.

    Also known as 200-6381 and without the air stem.

    0.0
    Add first review
    Not rated yet
    • $18.60
    Sorry, we only have 18 of that item available
  • Filler Cap Green Used - U803

    This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear. Comes with a new gasket foryou to install.

    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 5 of that item available
  • Large Valve Stem Packing - 🟡 𝟭𝟬 𝗣𝗔𝗖𝗞- TP01

    This is a 10 PACK - Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    0.0
    Add first review
    Not rated yet
    • $31.95
    Sorry, we only have 109 of that item available
  • 220 Red Logo Pyrex Globe USA - G28

    This is a US made original globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. These are used globes but in very nice shape.

    0.0
    Add first review
    Not rated yet
    • $28.00
    Sorry, we only have 19 of that item available
  • Burner Tube Short/Slant - S135

    Shorter burner tube for the model 220 slant lantern. Same as the normal 101-324 burner tube only a little shorter. Measures 2 1/4 inches long. Many of the slant 220 and 228 lanterns took shorter burner tubes.

    0.0
    Add first review
    Not rated yet
    • $7.00
    Sorry, we only have 6 of that item available
  • Ball Nut, Splined, Used - S97

    Single Ball Nut. Fits all Coleman lanterns except the 242 type models. In good shape - just dirty.

    0.0
    Add first review
    Not rated yet
    • $6.00
    Sorry, we only have 36 of that item available
  • Leather Pump Cup - 🟡 𝟭𝟬 𝗣𝗔𝗖𝗞 - TS81

    This is a 10 PACK of the common Coleman pump cup that fits most lanterns and stoves.

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    0.0
    Add first review
    Not rated yet
    • $34.65
    Sorry, we only have 442 of that item available
  • Filler Cap Gray, Used - E1668

    This is a used one piece filler cap. Paint may be chipped or missing andwill vary in wear. Gray in color like the new production Dual Fuel models. Includes a new gasket for you to install.

    0.0
    Add first review
    Not rated yet
    • $9.00
    Sorry, we only have 13 of that item available
  • Generator T44G, NOS - E1273

    New old stock T44G generator. This is the early version of the 220E5891 generator. Instead of a cardboard tube it has a cloth material over the spring. These show a bit of tarnish from being on the shelf for 80 years.

    Will fit Coleman Lanterns: 220 B thru 220 J, 228 B thru J, 275 & 275A
    Fits Coleman Lamp Models 117A, 118A, 118B, 119A, 132A, 133, 143 and 150
    Fits Sears Lantern models 476.74060, 476.72212, 476.72213 and 476.74070

    Box is not included, listing is for one generator.

    0.0
    Add first review
    Not rated yet
    • $23.75
    Sorry, we only have 771 of that item available
  • Burner Tube 2 1/2 Inch - E1471

    Reproduction burner tube that measures 2 1/2 inches long. Some early lanterns and lamps took this size.

    0.0
    Add first review
    Not rated yet
    • $5.40
    Sorry, we only have 84 of that item available
  • Used Square Nut - E1406

    This is a used pump square nut.

    Comes with one square nut ONLY.

    0.0
    Add first review
    Not rated yet
    • $1.75
    Sorry, we only have 142 of that item available
  • 220/228 Eccentric Block, Used - S119

    Used Eccentric Block for the 220 & 228 lanterns up through model F. Will not fit H, J, or K.


    0.0
    Add first review
    Not rated yet
    • $5.00
    Sorry, we only have 261 of that item available