426A

Products: 143 of 43
Show: 50
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.25
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $9.85
  • New Filler Cap Brass - C04

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $9.60
  • Valve Wheel Screw - S72

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-058 is needed.

    Not rated yet
    • $1.00
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Not rated yet
    • $3.55
  • Fuel and Air Tube - 1116

    Fuel and Air Tube

    Not rated yet
    • $1.10
  • Lighter Stem - E1261

    Lighting stem.

    Not rated yet
    • $6.20
  • Needle & Holder - GT29

    Needle & Holder

    Not rated yet
    • $4.90
  • Pump Clip - S22
    • Free Shipping

    Pump Clip - S22

    Pump Clip

    Not rated yet
    • $3.25
  • Filler Cap Green Used - E1248

    This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear.

    Comes with a new gasket.

    Not rated yet
    • $10.85
  • Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.90
  • Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.20
  • Pump Cup Neoprene - S13

    Pump Cup Neoprene for most lanterns

    Not rated yet
    • $3.55
  • Screw Flat Head Steel - S70

    Stainless steel screw for the burner ring assembly on Coleman 2 and 3 burner suitcase stoves. Also same part as 413-130 but this is a slot screw instead of phillips.

    Not rated yet
    • $1.95
  • Auxillary Manifold with Stem - E1325

    Auxillary Manifold with Stem

    Not rated yet
    • $8.70
  • Pump Assembly Leather Used Square Nut - E1256

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $13.55
  • Filler Cap 3 Piece Green Used - E1265

    This is a used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by picking out the ones in best shape first.

    We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.

    Comes with a new gasket NOT installed.

    Not rated yet
    • $11.00
  • Valve Wheel Black Old Style Used - S79

    This is a used part and may show signs of wear. There may also be a few small chips in it. This is the old style black valve wheel for 200A, 202, 220D, 220E and 220F, and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. It is the solid back style.

    Not rated yet
    • $11.00
  • Black Valve Wheel New Style USED - S78

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    Not rated yet
    • $9.00
  • Block and Needle Assembly - E1216

    Block and needle

    Not rated yet
    • $9.75
  • Filler Cap Screw 220 Size - S67

    Stainless steel filler cap screw for the 3 piece filler caps used on the 200A, 220B, 220C, 220D, 220E, 220F, 427 and similar sized filler caps.

    Fits the cap number: 220C1401

    Not rated yet
    • $1.10
  • Filler Cap Light Gray Used - E1208

    Used filler cap that fits most Coleman lanterns and stoves. Light gray in color like the early production Duel Fuel models. Paint is chipped or missing - each one will vary in wear. 

    Comes with a new gasket - not installed

    Not rated yet
    • $9.00
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one. 

    If your filler cap has a screw in the center of it then this gasket will not work. 

    The red filler cap is shown for illustration purposes only and is not included.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.30
  • Stove Handle Used - E1203

    This is a used stove handle for the model 413H stove and many others. It measures 5 3/4 inches across. Will show signs of rust and wear.

    Not rated yet
    • $3.25
  • Stove Handle Used - E1008

    This is a used handle for many Coleman stoves.

    It measures 5 13/16 inches across. It will show signs of rust and wear.

    Not rated yet
    • $3.25
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    Not rated yet
    • $5.75
  • 1/4" Valve Stem Bushing - S134
    • Free Shipping

    1/4" Valve Stem Bushing - S134

    Small bushing for the tip of the valve stem. This is the small beveled bushing that goes on the valve stem below the graphite packing. This is the only bushing for these lanterns unlike the 220/228 that has a second one. Also fits the 202, 242, and 243 lanterns, along with many stoves with a 1/4" valve shaft.

    Not rated yet
    • $3.80
  • Large Push On Nut for Neoprene Cups - S01
    • Free Shipping

    Large Push On Nut for Neoprene Cups - S01

    Push on nut for pump. The large push on nut is used with the neoprene pump cup.

    Not rated yet
    • $3.25
  • Filler Cap Red Used - E1252

    This is a used one piece filler cap. Paint is chipped or missing, wear and shade of the filler caps varies. 

    Comes with a new gasket - not installed

    Not rated yet
    • $9.00
  • Filler Cap Brass Used - E1210

    This is a used one piece filler cap. Each one will vary in wear.

    Comes with a new gasket - not installed

    Not rated yet
    • $9.00
  • Pump Assy Leather Used Push On Nut - E1257

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $11.95
  • Burner Cap Rings - E1450

    Used Burner Cap, Bowl, Rings and Bolt. Used but in good shape.

    Not rated yet
    • $4.35
  • Burner Cap & Fillers - E1496

    Used Burner Bowl, Cap, Bolt and Fillers - Bit dirty, but in good shape.

    Not rated yet
    • $4.35
  • Stove Latch #2 - E1041

    This is a used latch that was used on many stoves. Known to fit 413E, 426 and 426A stoves. It may fit others.

    Not rated yet
    • $5.40
  • Check Valve O Ring - S36
    • Free Shipping

    Check Valve O Ring - S36

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Pump Assembly, Universal - C45

    Universal pump assembly with leather cup that fits almost all Coleman lanterns and stoves. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $12.70
  • Used Pump Assembly Spring - S100
    • 3% less

    Used Pump Assembly Spring - S100

    Used Pump Assembly Spring

    Spring ONLY

    Not rated yet
    • $3.25
  • Used Square Nut - E1406

    This is a used pump square nut.

    Comes with one square nut ONLY.

    Not rated yet
    • $1.75
  • NOS Pump Assy Metal Pump Cap - E1405

    NOS metal pump cap for pump assembly

    Does not come with whole assembly

    Not rated yet
    • $2.00
  • Plastic Back Up Plate For Pump Assy - E1370

    NOS plastic back up plates for pump assembly


    Not rated yet
    • $1.25
  • Stove Tank Used Red #4

    Used Stove tank. Fits the models 426, 426A, 426B, 426C and 443. Is red in color. This is the "submarine style" tank.

    Not rated yet
    • $29.00
  • Stove Tank Used Red #5

    Used Stove tank. Fits the models 426, 426A, 426B, 426C and 443. Is red in color. This is the "submarine style" tank.

    Not rated yet
    • $29.00