426B

Products: 150 of 57
Show: 50
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a bolt in the center then these gaskets will work. 

    Red 3 piece filler cap shown for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.25
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one-piece filler caps. If your filler cap looks like the one pictured, then this gasket is the correct one. If your filler cap has a screw in the center of it, then this gasket will not work. The red filler cap is shown for illustration purposes only and is not included.

    Also known as part number 425A1361

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.30
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $3.55
  • Filler Cap, Brass - C004

    This is a new brass one piece filler cap made by Coleman. Comes with a new gasket and will fit most all lanterns and stoves other than the model 242 lantern and 500 stove that have the smaller filler caps. 

    It is also known as part number 425A1405.

    Not rated yet
    • $9.60
  • Leather Pump Cup Kit - C005

    This is a new leather pump cup, push on nut and back-up plate. This will fit most all lanterns and stoves. If converting from a rubber pump cup, make sure you use the new back up plate in this kit.

    Also known as part number 3000005094.

    Not rated yet
    • $6.45
  • Filler Cap Screw 220 Size - S68

    Stainless steel filler cap screw for the 3 piece filler caps used on the 200A, 220B, 220C, 220D, 220E, 220F, 427 and similar sized filler caps.

    Fits the cap number: 220C1401

    Not rated yet
    • $1.10
  • Check Valve O Ring - S20
    • Free Shipping

    Check Valve O Ring - S20

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Valve Wheel Screw - S77

    Valve wheel screw. This is the later self taping screw. Fits most lanterns. Can be used where a 17-059 is needed.

    Not rated yet
    • $1.00
  • Graphite Ribbon - P09

    Graphite ribbon. It is 1/4 inch wide and 12 inches long. It is scalloped to make it more flexible for wrapping. Works for tip cleaner assemblies or any other thing where the normal graphite packing won't fit. It is easily cut with a pair of scissors to fit whatever you might need.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $5.75
  • Pump Cup, Neoprene - C019

    This is a new Coleman made replacement pump cup  for all lanterns that came with the rubber style.

    Not rated yet
    • $3.55
  • Pump Clip, Used - S100
    • Free Shipping

    Pump Clip, Used - S100

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    Not rated yet
    • $2.00
  • Generator Stove - C30

    Fits models 413E, 413F, 413G, 426B, 426C, 426D, 442, 442A, and 443. New generator includes new gas tip, spring, and tip cleaning wire.

    Also known as part number 3000005106.

    Not rated yet
    • $34.50
  • Pump Clip - R580
    • Free Shipping

    Pump Clip - R580

    Pump Clip

    Not rated yet
    • $3.25
  • Pump Assembly Leather Used Square Nut - U810
    • New!

    Pump Assembly Leather Used Square Nut - U810

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $13.50
  • Air Stem, Old Style, Used - S107

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $2.00
  • Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $14.65
  • Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $15.20
  • 1/4" Valve Stem Bushing - S137

    This is the small, beveled bushing that goes on the valve stem below the graphite packing on the 200, 200A, 202, 242, and 243 lanterns, along with many stoves that have a 1/4" valve shaft. 

    Not rated yet
    • $3.80
  • Lighter Stem - E1261

    Lighting stem.

    Not rated yet
    • $6.20
  • Auxillary Burner Bowl and Rings - C53

    Auxiliary Burner Bowl, Rings And Screw 413E/413F/413G/424/426B/426/D/426G/442/442A/443  Instant Light, 2 & 3 Burner Stoves

    Not rated yet
    • $12.55
  • Large Push On Nut for Neoprene Cups - S09
    • Free Shipping

    Large Push On Nut for Neoprene Cups - S09

    Push on nut for pump. The large push on nut is used with the neoprene pump cup.

    Not rated yet
    • $3.25
  • Pump Assy Leather Used Push On Nut - U811

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $12.00
  • Filler Cap Gasket for 3 Piece Cap- 10 PACK - S41๐Ÿ”Ÿ
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap- 10 PACK - S41๐Ÿ”Ÿ

    This 10 pack of gaskets are for many lanterns, stoves, and lamps that take the standard 3 piece filler cap.  If your filler cap is a standard size and has a bolt in the center then these gaskets will work. Red 3 piece filler cap shown for demonstration purposes only.

    Not rated yet
    • $11.25
  • Metal Funnel Small - R503

    This is a new metal filler funnel. Small and easy to pack. See its size in the last photos where it is being used on a fount. Works well for standard sized filler caps. Will not work for the smaller filler caps on models 242, 243, 247, 249 lanterns with the smaller cap or the 500 stove.

    Not rated yet
    • $5.50
  • Filler Cap Green Used - U803

    This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear. Comes with a new gasket for you to install.

    Not rated yet
    • $9.00
  • Filler Cap Gasket for 1 Piece Cap - 10 PACK - S42๐Ÿ”Ÿ
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - 10 PACK - S42๐Ÿ”Ÿ

    This is a 10 PACK for the one-piece filler caps. If your filler cap looks like the one pictured, then this gasket is the correct one. If your filler cap has a screw in the center of it, then this gasket will not work. The red filler cap is shown for illustration purposes only and is not included.

    Also known as part number 425A1361

    Not rated yet
    • $11.70
  • Pump Assembly, Universal - C45

    Universal pump assembly with leather cup that fits almost all Coleman lanterns and stoves. Does not fit the small Peak 1 lanterns or stoves, some older style pumps found on QuickLites and similar lanterns/stoves where the pump cap does not have the clip that holds it onto the fount. Replaces part number 242D5201

    Not rated yet
    • $13.35
  • Burner Screw, Flat Head Steel - S71

    Stainless steel screw for the burner ring assembly on Coleman 2 and 3 burner suitcase stoves. Also same part as 413-130 but this is a slot screw instead of phillips.

    Not rated yet
    • $1.95
  • Needle Assembly, New - E1124

    Needle Assembly fits 426B, 426C, 413E, 413F, 413G, and 443 stoves.

    Not rated yet
    • $8.00
  • Burner Bowl, NOS - E1558

    Burner Bowl (Master)

    This part no longer being made by Coleman

    Not rated yet
    • $6.25
  • Filler Cap Gray Used - E1307

    This is a used one piece filler cap. Paint may be chipped or missing andwill vary in wear. Gray in color like the new production Dual Fuel models. Includes a new gasket for you to install.

    Not rated yet
    • $9.00
  • Filler Cap 3 Piece Red Used - U800

    This is for one used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by handing out the ones in best shape first. 

    We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.

    Comes with a new gasket that you will have to install.

    Not rated yet
    • $14.00
  • Large Valve Stem Packing - 10 PACK - P01๐Ÿ”Ÿ

    This is a10 PACK - Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Not rated yet
    • $31.95
  • NOS Metal Pump Cap - E1405

    NOS metal pump cap for pump assembly. Does not come with whole assembly - just the top exterior metal cap is included.

    Not rated yet
    • $2.50
  • Valve Wheel Red, Old Style, NOS - E1401
    • New!

    Valve Wheel Red, Old Style, NOS - E1401

    This is the old style NOS red valve wheel for 200A's, 502 stoves, 220/228's and others. It is completely interchangeable with the black wheel. Newer model 200A's and model 202 took the black wheel.

    Not rated yet
    • $18.00
  • Used Square Nut - E1406

    This is a used pump square nut.

    Comes with one square nut ONLY.

    Not rated yet
    • $1.75
  • Leather Pump Cup - 10 PACK - S81๐Ÿ”Ÿ

    This is a 10 PACK of the common Coleman pump cup that fits most lanterns and stoves.

    Has a 7/8 inch diameter and is made in the USA of oiled leather.

    Not rated yet
    • $33.75
  • Generator Coil - E1345

    Generator Coil. Rusty. 

    Fits 426B, 426C, 413E, 413F, 413G, 442, 442A and 443 stoves.

    Not rated yet
    • $2.15
  • Air Stem New Style Used - E1250

    Used air stem for most post-1980 stoves and lanterns. Has the smaller end on the air stem.

    Not rated yet
    • $2.00
  • Fuel and Air Tube - E1116

    Fuel and Air Tube

    Not rated yet
    • $1.10
  • Used Pump Assembly Spring - S120
    • 3% less

    Used Pump Assembly Spring - S120

    Used Pump Assembly Spring

    Spring ONLY

    Not rated yet
    • $3.25
  • Filler Cap, 3 Piece, Blue, Used - E1624

    This is for one used 3 piece blue filler cap. Shade and wear may vary.

    Comes with a new gasket that you will have to install.

    Not rated yet
    • $12.00
  • Block and Needle Assembly - E1216

    Block and needle

    Not rated yet
    • $9.75
  • Filler Cap Brown Used - E1026

    This is a used one piece filler cap from a 275 lantern. Paint may be chipped or missing in some spots - wear will vary. Comes with a new gasket that you will have to install.

    Not rated yet
    • $12.00
  • Stove Handle Used - E1008

    This is a used handle for many Coleman stoves. Please verify yours is silver in color, measures 5 13/16" long and looks like these - there were some made that were thinner and painted green. These will not fit without modification on those. These will show signs of rust and wear.

    Not rated yet
    • $3.25
  • Filler Cap Dark Green Used - E1431

    This is a used one-piece filler cap that is the darker green used on 288 and similar lanterns. Paint may be chipped or scratched; each one will vary in wear. Comes with one new gasket for you to install if needed.

    Not rated yet
    • $10.00