442A

Products: 139 of 39
Show: 50
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $9.85
  • Air Stem New Style Used - E1250

    Used air stem for most post-1980 stoves and lanterns. Has the smaller end on the air stem.

    Not rated yet
    • $0.25
  • Air Stem Used Old Style - S31

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $4.25
  • Auxillary Burner Bowl and Rings - C53

    Auxiliary Burner Bowl, Rings And Screw 413E/413F/413G/424/426B/426/D/426G/442/442A/443  Instant Light, 2 & 3 Burner Stoves

    Not rated yet
    • $12.55
  • Block and Needle Assembly - E1109

    Block and Needle Assembly. Measures approximately 4 1/4 inches long.

    Not rated yet
    • $7.05
  • Burner Cap & Fillers - E1496

    Used Burner Bowl, Cap, Bolt and Fillers - Bit dirty, but in good shape.

    Not rated yet
    • $4.35
  • Burner Cap + Rings Used - E1318

    Used Master Burner Cap + Rings

    Not rated yet
    • $3.25
  • Burner Cap Rings - E1450

    Used Burner Cap, Bowl, Rings and Bolt. Used but in good shape.

    Not rated yet
    • $4.35
  • Cap Gasket - S56
    • Free Shipping

    Cap Gasket - S56

    This gasket is for the model 227, 427, 220/228 Slant lanterns, most winged style fuel caps, early 220B's, and other similar lanterns and lamps that have the older style cap insert.

    It is the same outside diameter as cap gasket 118B1361 but has a smaller inside hole. 

    Old part number 115-1361. 

    This will not seal they typical Coleman lantern cap.

    Not rated yet
    • $1.55
  • Check Valve O Ring - S36
    • Free Shipping

    Check Valve O Ring - S36

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Check Valve With Stem - C01

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. Comes with the new O ring. If your part diagram calls for the 242B5381 or a 621-5361 check valve then this would be the correct part. The latest part number for this is 2006381ZCL.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $9.40
  • Filler Cap 3 Piece Green Used - E1265

    This is a used 3 piece filler cap. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by picking out the ones in best shape first.

    We are showing 3 caps for demonstration purposes only to highlight the condition it could be in - This is for only one cap.

    Comes with a new gasket NOT installed.

    Not rated yet
    • $11.00
  • Filler Cap Brass Used - E1210

    This is a used one piece filler cap. Each one will vary in wear.

    Comes with a new gasket - not installed

    Not rated yet
    • $9.00
  • Filler Cap Gasket for 1 Piece Cap - S42
    • Free Shipping

    Filler Cap Gasket for 1 Piece Cap - S42

    This is the gasket for the one piece filler caps. If your filler cap looks like the one pictured then this gasket is the correct one. 

    If your filler cap has a screw in the center of it then this gasket will not work. 

    The red filler cap is shown for illustration purposes only and is not included.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $1.30
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.25
  • Filler Cap Green Used - E1248

    This is a used one piece filler cap. Paint is chipped or missing - each one will vary in wear.

    Comes with a new gasket.

    Not rated yet
    • $10.85
  • Filler Cap Light Gray Used - E1208

    Used filler cap that fits most Coleman lanterns and stoves. Light gray in color like the early production Duel Fuel models. Paint is chipped or missing - each one will vary in wear. 

    Comes with a new gasket - not installed

    Not rated yet
    • $9.00
  • Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.20
  • Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.90
  • Fuel Air Tube - E1465

    Fuel Air Tube

    Not rated yet
    • $1.10
  • Generator Coil - E1345

    Generator Coil. Rusty. 

    Fits 426B, 426C, 413E, 413F, and 443 stoves.

    Not rated yet
    • $2.15
  • Generator Coil - E1431

    This used coil spring fits models 413E, 413F, 413G, 426B, 426C, 426D, 442, 442A, and 443. 

    Not rated yet
    • $3.50
  • Generator Stove - C30

    Fits models 413E, 413F, 413G, 426B, 426C, 426D, 442, 442A, and 443. New generator includes new gas tip, spring, and tip cleaning wire.

    Not rated yet
    • $37.50
  • Large Valve Stem Packing - P01

    Typically used to stop a fuel leak from the valve stem on older appliances.

    This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.

    If you need to check your model, please see the PARTS DIAGRAM PAGE

    425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.

    Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201. 

    Made of 100% graphite.

    Not rated yet
    • $3.55
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • Lighter Stem - E1261
    • New!

    Lighter Stem - E1261

    Lighting stem.

    Not rated yet
    • $6.20
  • Manifold Pipe - E1454

    Manifold pipe. It is 10 inches long.

    Not rated yet
    • $9.75
  • New Filler Cap Brass - C04

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $9.60
  • New Filler Cap Nickel - E1170
    • New!

    New Filler Cap Nickel - E1170

    New old stock nickel plated one piece cap. The ones I have left do not come in a package. Fits most lanterns and stoves except for the model 242 lantern and model 500 stove.

    Not rated yet
    • $15.75
  • O-Ring - S37
    • Free Shipping

    O-Ring - S37

    Fits the fuel tube on all appliances that have a plastic fuel and air tube.  

    Models: 214, 282, 285, 288, 290, and 295.

    Also fits the fuel tube on the 550B stove.

    Not rated yet
    • $1.45
  • Pump Clip - S22
    • Free Shipping

    Pump Clip - S22

    Pump Clip

    Not rated yet
    • $3.25
  • Pump Plunger - C37

    This is the short pump used on the small stoves and lanterns. 400, 440 series stoves and model 222, 226, and 229 lanterns. Comes with the plastic style pump cap and neoprene pump cup.

    Not rated yet
    • $8.85
  • Screw Flat Head Steel - S70

    Stainless steel screw for the burner ring assembly on Coleman 2 and 3 burner suitcase stoves. Also same part as 413-130 but this is a slot screw instead of phillips.

    Not rated yet
    • $1.95
  • Stove Generator Used - E1442

    Used generator includes gas tip, spring, and tip cleaning wire. This will fit models 413E, 413F, 413G, 426B, 426C, 426D, 442, 442A, and 443. Over the years Coleman changed the outer tube of the generator, but all are compatible with the above models. Yours may be any style shown in the second photo.

    Not rated yet
    • $10.00
  • Stove Tank Red Used #8

    Used tank for the model 413C - 413F, and 442 & 442A stove. This is the late production, red colored. 

    Not rated yet
    • $23.00
  • Valve & Generator - C33

    New Coleman made valve & generator. This part fits: 413B, 413C, 413D, 413E, 413F, 413G, 426D, 442, Sears 476.72302, 476.72303, 476.74970, 476.74980

    Not rated yet
    • $72.15
  • Valve & Generator - E1514
    • 46% less

    Valve & Generator - E1514

    Used valve, generator, spring, needle, gas tip and pick up tube. Valve and stem turn as they should. Needle passes through the gas tip in the off position. These were taken of of used stoves, but we cannot guarantee they will work without being cleaned up and worked over. This part fits: 413B, 413C, 413D, 413E, 413F, 413G, 426D, 442, Sears 476.72302, 476.72303, 476.74970, 476.74980

    Not rated yet
    • $20.00
  • Valve Assembly Small Stem - E1292

    Found on the earlier than 425F stove models. Use part 412-2531 to make a complete valve assembly.

    Not rated yet
    • $17.35
  • Valve Wheel Screw Used - S24

    Used valve wheel screw.  Will be in good condition.

    Not rated yet
    • $0.80