121
-
Peerless Mantles 2C-HG - M01
Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.
-
Mantle String Tie #21 4 Pack - M02
Coleman's Most Popular Sized Mantles. 4 mantles per pack.
Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960
Also known as part number 3000004344.
-
Burner Cap New - C09
New burner cap for the model 242 series lanterns. Also fits the 200, 200A, 202, 243, and 247 lanterns.
Also known as part number 2423231.
-
Mantle String Tie #21 2 pack - M03
Coleman's Most Popular Sized Mantles. 2 mantles per pack.
Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960
Also known as part number 3000004345.
-
Used Generator Nut - S26
Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.
-
Generator Nut - S176
Generator nut. Fits many models of lanterns which take the 220E5891 generator: 220s, 228's, 275. Also fits many other models. Find your parts diagram HERE and verify the generator nut is listed as 605-210.
-
Tip Cleaner Stem Reproduction - S198
Reproduction tip cleaner assembly for the model 200, 200A, 201, 202, 242, 247 and similar lanterns. Also fits the 520/M1941 stove.
-
Generator Reproduction - R200
Reproduction Generator for 200, 200A, 202, 242, 243, 243A & Similar Sears Lanterns. New generator includes new gas tip, spring, and tip cleaning wire. The generator is complete and you need nothing else for the install.
-
Needle Assembly Reproduction - S62
Reproduction needle assembly for the 200A2891 T66 generator used on models 121, 200, 200A, 202, 242, 242B, 242C, 476.72211, 476.74550
-
Burner Tube Brass - E1269
Burner tube for the model 242, 243, 234, 247 series lanterns. 15/16 inches long.
-
Burner Cap Reproduction - S94
New burner cap for the model 242 series lanterns. Also fits the 200, 200A, 202, 243, and 247 lanterns.
Solid brass with stainless steel screen.
-
200A Globe Red Logo Replacement - G70
This is a used USA made red letter replacement logo globe. Although used, it will be in good condition. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.
-
Reproduction Gas Tip - GT2
Reproduction gas tip for 200A5891 generator. Also works well for using on the 220 generators to do a kerosene conversion.
-
200A Globe Clear - G01
New Coleman made Globe. It will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.
Also known as part number R690B051.
-
Lamp Globe Holder - R502
This is a reproduction lamp globe holder that allows you to use a common 220 size globe on your lamp. The original lamp globes are expensive and this is a great alternative. Burn your old lamps and no longer worry about breaking a rare globe. Globe is not included.
-
Generator Spring Used - S07
Used generator spring for 200, 200A, 242, 243, 202 & Similar Sears Lanterns.
-
Generator Spring - S118
Reproduction generator spring for 200, 200A, 242, 243, 202 & Similar Sears Lanterns.
-
Pump Cup Assembly - S195
New reproduction pump cup assembly for 242 NL (No Letter), 242A , 243 , 246 and or any Coleman lantern or stove from the early 30's with a solid pump stem with no air hole in the middle. These are made for the USA manufactured Coleman pump shafts and will fit as they should. If yours is made in Canada, you will have to use a small file to widen the brass center to a cone shape to match your pump shaft - see the photos.
-
-
Burner Tube Steel - E1357
This steel burner tube was used on the 242b and 242C war time lanterns. 15/16 inches long.
-
200A Globe NO. 550 - G202
This is an original red letter logo globe. Although used it will be in good condition. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249. A bit of rust residue on the globe, will clean off easily with oven cleaner.
-
Burner Tube with Nut - Steel - E1127
Steel burner tube and nut. A little longer than the normal 242 burner tube. It is 1 1/8 inches long.
-
200A Globe Clear - G82
No markings on these globes. This will fit models 200, 200A, 200B, 201, 202, 242A, 242B, 242C, 243, 243A, 234, 247, 249, 5101, 5120, 5121 and 5122.
Top and bottom opening is 3-1/2", bulge width is 4-1/2" and is 4-1/16" tall.
-
200A Globe Pyrex Old Red Logo - G102
This is a used original old red letter logo globe used on lanterns from 1960 to 1980. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.
-
Lamp Shade White Floral - L12
Only 1 left in stockThese shades are hand made here in the USA. These require a large box size to ship and is the reason for the $65 shipping fee that you will see in checkout. International buyers may see a refund or a request for more shipping after the purchase depending on your location.
This product is not included in the OCP free shipping program.
-
Lamp Shade Blue Floral - L11
Only 1 left in stockThese shades are hand made here in the USA. These require a large box size to ship and is the reason for the $65 shipping fee that you will see in checkout. International buyers may see a refund or a request for more shipping after the purchase depending on your location.
This product is not included in the OCP free shipping program.
-
Lamp Shade Green Floral - L10
Only 1 left in stockThese shades are hand made here in the USA. These require a large box size to ship and is the reason for the $65 shipping fee that you will see in checkout. International buyers may see a refund or a request for more shipping after the purchase depending on your location.
This product is not included in the OCP free shipping program.
-
200A Globe Old Red Logo - G201
This is a used original old red letter logo globe used on lanterns from 1960 to 1980. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.
The logo is faded.
-
200A Globe Old Red Logo - G200
This is a used original old red letter logo globe used on lanterns from 1960 to 1980. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.
This has a burn mark and logo is faded.
-
200A Globe Trailblazer Frosted - G126
This is a used Trailblazer globe. These are not Coleman globes but are the same size and were made in the USA about 20 to 30 years ago. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, 247, and 249.
-
200A Globe, Frosted 4th of July - G145
Frosted design globe for the 200A and similar sized lanterns.