129G

Products: 139 of 39
Show: 50
  • Mixing Chamber Used - E29

    Early mixing chamber used on the early 220/228B lanterns and lamps of the same period.

    Not rated yet
    • $9.75
  • Eccentric Block - S137

    Eccentric Block

    Not rated yet
    • $7.60
  • Filler Cap Gasket for 3 Piece Cap - S41
    • Free Shipping

    Filler Cap Gasket for 3 Piece Cap - S41

    This gasket is for many lanterns, stoves, and lamps that take the standard 3 piece filler cap. 

    If your filler cap is a standard size and has a screw in the center then these gaskets will work. 

    Red 3 piece filler cap show for demonstration purposes only.

    Score: 5.00 (votes: 2)
    Reviews: 2
    |
    2
    • $1.25
  • Gas Tip Used - GT1

    Used Gas tip.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.15
  • Leather Pump Cup - S81

    This is the common Coleman pump cup that fits most lanterns and stoves. 

    Has a 7/8 inch diameter and is made of oiled leather.

    Score: 3.33 (votes: 3)
    Reviews: 3
    |
    3
    • $3.75
  • Mantle String Tie #21 2 pack - M3

    Coleman's Most Popular Sized Mantles. 2 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $3.75
  • Burner Tube Brass 2 7/8 - E36

    Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

    Not rated yet
    • $4.35
  • Filler Cap Brass New - R319

    This is a reproduction brass cap for the table lamps that did not have an internal pump. Fits lamps 129, 129A, 129G, 130G, 130K, 130P. 131P, 133, 134A, 134P, 134G, 143, 150B, 150G, 150R, 150I, 150BK, 150GK, 150RK, and 150IK. Fits stoves 375, 375A, 376, 377, 378, 378A, 379, and 379A. Fits Handy Gas Plants 458 and 458G.

    Not rated yet
    • $19.00
  • Generator Nut - S176

    Generator nut.

    Not rated yet
    • $5.85
  • Mantle String Tie #21 4 Pack - M2

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $7.00
  • Decal - Fits 129 Lamp - D50
    • Free Shipping

    Decal - Fits 129 Lamp - D50

    129 Lamp Decal

    Not rated yet
    • $6.35
  • Peerless Mantles 2C-HG - M1

    Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

    Score: 5.00 (votes: 3)
    Reviews: 3
    |
    3
    • $5.65
  • Filler Cap Nickel New - R314

    This is a reproduction nickel plated brass cap for the table lamps that did not have an internal pump. Fits lamps 129, 129A, 129G, 130G, 130K, 130P. 131P, 133, 134A, 134P, 134G, 143, 150B, 150G, 150R, 150I, 150BK, 150GK, 150RK, and 150IK. Fits stoves 375, 375A, 376, 377, 378, 378A, 379, and 379A. Fits Handy Gas Plants 458 and 458G.

    Not rated yet
    • $20.60
  • Burner Tube Nickel Plated

    This is a nickel plated brass burner tube. Not polished. More of a utilitarian type finish. For most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

    Not rated yet
    • $7.60
  • 220 Burner Screen - S90
    • Free Shipping

    220 Burner Screen - S90

    Burner screen for the model 220 and 228 lanterns. Fits most double mantle lanterns and lamps with small burner caps.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $2.05
  • Lamp Globe Holder - R503

    This is a reproduction lamp globe holder that allows you to use a common 220 size globe on your lamp. The original lamp globes are expensive and this is a great alternative. Burn your old lamps and no longer worry about breaking a rare globe. Globe is not included.

    Not rated yet
    • $15.55
  • Shade Holder CQ Style - R501
    • New!

    Shade Holder CQ Style - R501

    Reproduction shade holder for the old CQ style lamps.

    Not rated yet
    • $31.60
  • Lamp Globe Reproduction - G8

    Reproduction lamp globe for the later style Coleman lamps. Real nice alternative to an expensive original. This globe measures 5 7/8 inches tall. The top rim opening has a 3 inch diameter. The bottom opening has a 3 5/16 inch diameter. It bulges out at the widest point to about 5 inches. Some people call this the 355 globe.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $29.00
  • Used Generator Nut - S26

    Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

    Not rated yet
    • $2.00
  • Lamp Finial and Nut Reproduction - R317

    Reproduction lamp finial and nut for later Coleman lamps. Made of brass. Identical to the original.

    Not rated yet
    • $19.55
  • Iron Pump Reproduction - R311

    Reproduction small pump for the Coleman irons. Will also work on any Coleman lamp or lantern.

    Not rated yet
    • $23.10
  • Air Stem - E170

    New Old Stock Air stem / thumb screw for filler plugs used on the old Quicklite lanterns and lamps. These are all brass. None have any nickle plating on them.

    Not rated yet
    • $15.20
  • Mixing Chamber Aluminum - E108

    Aluminum mixing chamber for most double mantle lanterns and lamps. Coleman experimented with aluminum for a few parts back in the old days. I believe it was discovered that aluminum could not hold up to the heat. Probably more of a display piece than for using.

    Not rated yet
    • $10.85
  • Burner Tube Short - S132

    Shorter burner tube for the model 220 slant lantern. Same as the normal 101-324 burner tube only a little shorter. Measures 2 1/4 inches long. Many of the slant 220 and 228 lanterns took shorter burner tubes.

    Not rated yet
    • $7.00
  • Shade Holder Rod With Nut - S128

    Reproduction shade holder rod with nut. A lot of the later style US lamps took this type rod.

    Not rated yet
    • $8.95
  • Burner Tube 2 1/2 Inch - E32

    Reproduction burner tube that measures 2 1/2 inches long. Some early lanterns and lamps took this size.
    Not rated yet
    • $5.40
  • 908M Mantles - E92

    Quick Clip mantles. Same size as Coleman 21A mantles.

    Not rated yet
    • $4.35
  • Burner Tube Steel Old Style - E114

    Steel burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long. These are the older style gray looking steel tubes as used on lanterns and lamps made during the war years.

    Not rated yet
    • $4.35
  • Air Stem Reproduction - S126

    Reproduction air stem for the Quicklite lanterns and lamps. Also fits the Model 16 heater.

    Not rated yet
    • $13.00
  • Globe Holder Clamps Reproduction - R607

    Reproduction globe holder set. Used on all later Coleman lamps that used a globe. We have found these clamps to not have the bend quite like the originals - you most likely will need to bend it slightly to match the original. We bent this set by hand without any special tools. We will make the correction on the next batch we get.

    Not rated yet
    • $10.00
  • Burner Tube Brass 2 3/4 - E448

    Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 3/4 inches long.

    Not rated yet
    • $4.35
  • Filler Cap Brass Outer Cap Used - E71

    This is a used brass outer cap for the table lamps that did not have an internal pump. Fits lamps 129, 129A, 129G, 130G, 130K, 130P. 131P, 133, 134A, 134P, 134G, 143, 150B, 150G, 150R, 150I, 150BK, 150GK, 150RK, and 150IK. Fits stoves 375, 375A, 376, 377, 378, 378A, 379, and 379A. Fits Handy Gas Plants 458 and 458G.
    Not rated yet
    • $10.85
  • Eccentric Block Used - S101

    Used Eccentric Block 


    Not rated yet
    • $5.00
  • Finial for Lamp - Reproduction - S194

    New brass finial for lamps. 


    Not rated yet
    • $17.35
  • Mantle Insta-Clip 2 #21 2 pack - M13

    Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $4.95
  • Check Valve O Ring - S36
    • Free Shipping

    Check Valve O Ring - S36

    Small thin O ring for the common Coleman check valves. Made of gas resistant material.

    Not rated yet
    • $1.10
  • Mixing Chamber Used with Vent Rod - E105

    Early mixing chamber used on the early 220/228B lanterns and lamps of the same period.

    Not rated yet
    • $9.75
  • Plastic Back Up Plate For Pump Assy - E876

    NOS plastic back up plates for pump assembly


    Not rated yet
    • $1.25
  • Used Leather Pump Cup - E680
    • New!

    Used Leather Pump Cup - E680

    These are used leather pump cups that fit most lanterns and stoves. They may need some oil and conditioning, but are still flexible. This is the typical sized 7/8" pump cups for most lanterns and stoves.

    Not rated yet
    • $1.00