Model "C"

Coleman's Most Popular Sized Mantles. 2 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

Fits models Air O lantern, 327, 427, Slant 220 lanterns and CQ lamps

Coleman's Most Popular Sized Mantles. 4 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Used gas tip for the Q99 generator and some Quick-Lite Lanterns and Lamps. Very tarnished

Most Popular Sized Mantles. 4 mantles per pack. Use on these lanterns models: 200, 200A 201, 214, 220, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960. Also all Coleman Lamps. These Peerless mantles are the same size as the Coleman 21A mantles. Made in India.

This is a nickel plated brass burner tube. Not polished. More of a utilitarian type finish. For most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

Burner screen for the model 220 and 228 lanterns. Fits most double mantle lanterns and lamps with small burner caps.

Converts your standard size lamp or lantern filler plug hole so you can use a more modern lamp cap instead. No more having to have a crescent wrench. Screw this on in place of your filler plug. Fits Coleman CQ lamps, 327 lanterns, Air O Lanterns, and others with similar sized filler plug.

Used burner assembly for the old model 227, 327,427, and Air O Lite lanterns. Will also work on CQ lamps and other lamps that would have originally taken the Q99 generator.

Reproduction shade holder screw for Coleman lamps. The top side is threaded to accept a hanging rod.

Reproduction shade holder for the old CQ style lamps.

Reproduction lamp finial and nut for later Coleman lamps. Made of brass. Identical to the original.

Reproduction Q99 generator for the old Quicklite style lanterns and lamps. They work great.

This is the Bakelite top finish spacer on a CQ lamp handle. It is in used condition.

Used lamp handle metal washer for the CQ lamps. Will show some rust but will be solid.

Reproduction filler plug for the old Quicklite lanterns and lamps. Made of solid brass. Now you can replace your old rounded off filler plug. Made to use the 427 gasket rather than the old lead gasket. Will come with the new gasket.

Lead gasket used on the filler plugs of old Quicklite lanterns, lamps and some stoves.

New Old Stock Air stem / thumb screw for filler plugs used on the old Quicklite lanterns and lamps. These are all brass. None have any nickle plating on them.

Shorter burner tube for the model 220 slant lantern. Same as the normal 101-324 burner tube only a little shorter. Measures 2 1/4 inches long. Many of the slant 220 and 228 lanterns took shorter burner tubes.

Reproduction burner tube that measures 2 1/2 inches long. Some early lanterns and lamps took this size.

This is a used lamp valve for the model CQ lamp. It is the later style valve with the solid molded wheel. We have not rebuilt this valve so you will need to plan on that.

This is a used lamp valve for the CQ model lamps. It has the earlier fiber style valve wheel. We have not rebuilt this valve so you will need to plan on that. It uses a P2 graphite packing HERE.

Steel body Q77 generator. Probably made during WWII or possibly even WW1. New old stock but very tarnished from age.

Quick Clip mantles. Same size as Coleman 21A mantles.

Steel burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long. These are the older style gray looking steel tubes as used on lanterns and lamps made during the war years.

Used figure 8 piece as used on the old Q style burner.

This is a used lamp valve for the CQ model and some other lamps. It has the Canadian style valve wheel. I have not rebuilt this valve so you will need to plan on that. It uses a P2 graphite packing HERE.

Reproduction air stem for the Quicklite lanterns and lamps. Also fits the Model 16 heater.

Filler plug gasket for the model CQ lamps,327 Quicklite lanterns and many older stoves. Can be used in place of the 104-136 lead gasket.

Brass burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 3/4 inches long.

New brass finial for lamps. 

Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. 

These simply slide on and you cross the wires instead of tying strings - very quick to install.

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Coleman's Most Popular Sized Mantles with the Insta-Clip. 2 mantles per pack. Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Early mixing chamber used on the early 220/228B lanterns and lamps of the same period.

This is a used lamp valve with a cracked valve wheel. It feels solid, but has a crack - see photos. It is for the CQ model lamps. It has the earlier fiber style valve wheel. We have not rebuilt this valve so you will need to plan on that. It uses a P2 graphite packing HERE.

Used Q99 generator for the old Quicklite style lanterns and lamps. May or may not be usable.

This is a used lamp valve body for the CQ model lamps