They are approximately 12 inches of new black plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. Is enough to use on about two to three lantern bails.
They are approximately 10 inches of new clear plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. Is enough to use on about two to three lantern bails.
Chain for military lanterns and stoves. These are 8" long which is long enough to use on one funnel and one cap on a military lantern and have an inch left over.
Reproduction 7/16" generator wrenches. These are the wrenches used for the smaller generators. Great for putting in your part safe.
Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2.5" tall by 2" wide.
Instructions:
Supply is limited to what is left over from previous years. Heavy duty embroidered patch with iron on backing. Measures approximately 3 inches diameter.
Large green filter funnel felt for the Canadian Coleman funnels. It is approximately 8 inches square.
Window decal for glass or a hard surface - gloss white in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2.5" tall by 2" wide.
Instructions:
Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2.5" tall by 2" wide.
Instructions:
Window decal for glass or a hard surface - gloss white in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2" tall by 3.5" wide.
Instructions:
New old stock can openers. HERE is a link to a website with some good history on these. Good to have one of these handy for emergencies or camping.
Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2" tall by 3.5" wide.
Instructions:
Green filter funnel felt for the Canadian Coleman funnels. Felt is approximately 4 inches square.
Supply is limited to what is left over from previous years. Heavy duty embroidered patch with iron on backing. Measures 3 inches diameter.
Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2" tall by 3.5" wide.
Instructions:
Supply is limited to what is left over from previous years. Heavy duty embroidered patch with iron on backing. Measures approximately 3 inches diameter.
OCP Collector's Edition, Model 200A Blackband Coffee Mug - 11oz.
OCP Collector's Edition, Model 228F Coffee Mug - 11oz.
OCP Collector's Edition, Model 220F Coffee Mug - 11oz.
Supply is limited to what is left over from previous years. Embroidered patch with iron on backing. Measures 3 inches diameter.
Used Coleman No. 0 filtering funnel. Comes with filter.
Window decal for glass or a hard surface - flat black in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2.5" tall by 2" wide.
Instructions:
OCP Collector's Edition, Model 200 US Coffee Mug - 11oz.
Pot holder. Handle squeezes together to clamp over the edge of pans.
Wrench used to remove diamond cap drain assembly on the Snow-Lite Cooler series. May fit in others. Stores in the interior drain hole when not in use. These have been in storage on a shelf for a long time and may show some surface rust.
Window decal for glass or a hard surface - flat black in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.
Decal is 2" tall by 3.5" wide.
Instructions:
OCP Collector's Edition 200A Coffee Mug - 11oz.
Large size Coleman Sunrise globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro.
Will fit on any lantern that uses the 220/290A/295 style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way - see the last photo for clarification about the bail location issue.
Will fit well on the 290A, 290B and 295. Fits tightly on the 236, 237, 238, 635 and 639. Look at the photos to get an idea of how they fit - only first photo has this products design. Will conflict with the bail on all 220 and 228 models.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
This is 12" of 100% natural cotton wick for Kerosene oil lamps. Used in some models of Handlan lamps that use the round 1/4" wick similar to this one:
New Coleman No. 0 filtering funnel.
Does not come with box.
Small 4" x 4" Stainless steel cast iron cleaner for grills, BBQ's, and cookware. Good size to take camping.
New black carry case for models 220s, 290s, 295, 327, & 427, Quick-Lite lanterns and other larger sized lanterns.
Will not work for smaller lanterns like 200A, 286, 288 or 335.
Large size Coleman Birthday Lantern globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro.
Will fit on any lantern that uses the 220/290A/295 style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way - see the last photo for clarification about the bail location issue.
Will fit well on the 290A, 290B and 295. Fits tightly on the 236, 237, 238, 635 and 639. Look at the photos to get an idea of how they fit - only first photo has this products design. Will conflict with the bail on all 220 and 228 models.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
Single mantle Sears lantern size globe wrap to show off your lantern and to protect the glass during travel. These are easy to attach with Velcro (may be black or white)
Will fit on any lantern that uses the 200A style globe. These are for the Sears one mantle lanterns. Will not fit any with a mica chimney - too skinny.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
Coleman red 275 style globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro.
Will fit on any lantern that uses the larger taper style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way.
Will fit well on the 275, 275A, 331, 621s, and the Sears tapered globe lanterns. These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
Coleman red 275 style globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro.
Will fit on any lantern that uses the larger taper style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way.
Will fit well on the 275, 275A, 331, 621s, and the Sears tapered globe lanterns. These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
Used Coleman No. 0 filtering funnel. Is missing filter insert.
May vary in wear
A solid, well-made hat from Otto featuring the updated Old Coleman Parts logo, applied in Idaho. Black and charcoal gray with an adjustable back closure.
Large size Sears globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro. We don't believe these will fit any Sears double mantle due to a conflict with the bail handle, so these would have to be displayed most likely on a Coleman lantern.
Will fit on any lantern that uses the 220/290A/295 style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way - see the last photo for clarification about the bail location issue.
Will fit well on the 290A, 290B and 295. Fits tightly on the 236, 237, 238, 635 and 639. Look at the photos to get an idea of how they fit - only first photo has this products design. Will conflict with the bail on all 220 and 228 models.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
New Coleman No. 0 filtering funnel.
Does not come with box or filter.
Single mantle Sears lantern size globe wrap to show off your lantern and to protect the glass during travel. These are easy to attach with Velcro.
Will fit on any lantern that uses the 200A style globe. These are for the Sears one mantle lanterns. Will not fit any with a mica chimney - too skinny.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
Large size Sears globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro. We don't believe these will fit any Sears double mantle due to a conflict with the bail handle, so these would have to be displayed most likely on a Coleman lantern.
Will fit on any lantern that uses the 220/290A/295 style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way - see the last photo for clarification about the bail location issue.
Will fit well on the 290A, 290B and 295. Fits tightly on the 236, 237, 238, 635 and 639. Look at the photos to get an idea of how they fit - only first photo has this products design. Will conflict with the bail on all 220 and 228 models.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
Large size Sears globe wrap which will show off your lantern and protect the glass during travel. These are easy to attach with Velcro. We don't believe these will fit any Sears double mantle due to a conflict with the bail handle, so these would have to be displayed most likely on a Coleman lantern.
Will fit on any lantern that uses the 220/290A/295 style globe as long as the bail handle terminates on the vent of the lantern. Make sure your bail handle hinges at the vent - otherwise it will be in the way - see the last photo for clarification about the bail location issue.
Will fit well on the 290A, 290B and 295. Fits tightly on the 236, 237, 238, 635 and 639. Look at the photos to get an idea of how they fit - only first photo has this products design. Will conflict with the bail on all 220 and 228 models.
These will melt, so your lantern has to be cool. Made of neoprene fabric and Velcro here in the USA.
If you want to remove your Coleman lantern check valve, this is the original type of tool used in the beginning. This is a used manual tool.
Please see photos for condition.
Waist belt kit for the Coleman pack frames.
If you want to remove your Coleman lantern check valve, this is the original type of tool used in the beginning. This is a used manual tool.
Please see photos for condition.
If you want to remove your Coleman lantern check valve, this is the original type of tool used in the beginning. This is a used manual tool.
Please see photos for condition.
Used Filter Rings ONLY for the small No. 0 copper funnel.
