- May 1, 2024Gather 'round, fellow GPA enthusiasts!Our annual convention is fast approaching, and guess what? It’s practically in our backyard—just 40 miles from our OCP home! June 27 to 29, 2024
Search
159 products found
Sort by:Recommended
Burner Tube - R319
Brass reproduction burner tube for the 220-228 series lanterns. Measures approximately 2 7/8 inches long.
159 Lamp Burner, Used - E1310
Only 1 left in stockBurner frame for the 158, 159 and 159X kerosene lamps. May fit others too. Valve turns and seems to operate smoothly.
- New!
220F Vent, Small Frame, Black, New - V116
This vent will fit only the 220F model with a smaller burner frame made up to about 1971. After that, the F model used a different burner frame that included 4 bumps where the uprights are fastened. The mounting location is only 5-1/8" on this vent. This vent will not fit on models G, H, J or K either. Please make sure the top of your 220 looks like the photo below.
If the top of your burner frame has bumps, this vent will not fit. See photo below for an example.
Burner Cap & Rings - C054
Burner cap and rings for the 400, 400A, 400B, 440, 442, 508, 533, & 3024 Stoves
Burner Tube Steel - E1480
Steel burner tube for the 220-228 series lanterns. Measures approximately 2 7/8 inches long.
Burner Tube Steel - E1357
This steel burner tube was used on the 242b and 242C war time lanterns. 15/16 inches long.
- Free Shipping
220 Burner Screen - S30
Burner screen for the model 220 and 228 lanterns. Fits most double mantle lanterns and lamps with small burner caps.
Burner Support Used - E1553
Used burner support for the 502 stove. Will have varying rust on each one but all are solid.
201 Burner Tube - S161
Burner tube for the 201 kerosene lantern. Has a larger opening on the end than the 200 burner tube.
Burner Assembly Electronic - E1318
Burner assembly for the rare 414 gas stove with electronic ignition.
Burner Bowl, Used - E1527
Used burner bowl for the 502 stove. These are in good shape and may have some rust. The photo is an example, not the actual.
Burner Cap & Screen - S35
New, reproduction burner cap for 321, 331, 335, 339, 621, 625, 635 and 639 lanterns. Solid brass with stainless steel screen.
Also known as part number 335-315
Burner Cap Reproduction - S34
New burner cap for the model 242 series lanterns. Also fits the 200, 200A, 202, 243, and 247 lanterns.
Solid brass with stainless steel screen.
Burner Bowl Rusty - E1450
Used burner bowl for the 502 stove. Rusty, but seems solid. Each one will vary with the amount of rust.
Burner Screw, NOS E1571
Screw/Bolt for the burners on 5435A and 5435B Stoves. 2 are needed for both stoves.
Burner Assembly, Used - E1424
Only 1 left in stockUsed burner assembly for lantern models 5154B, 5152D, 5153A, 5151C and 5150. Burner screens are in good shape.
- New!
Lamp Burner & Pick up Tube, NOS - E1637
Only 1 left in stockNOS burner frame and pick up tube for Lamp Models 139, 152, 152A Gasoline and Kerosene. May fit others too. Will have signs of tarnish due to age.
Burner Tube, Brass, NOS - E1269
New old stock burner tube for the model 242, 243, 234, 247 series lanterns. 15/16 inches long.
288 Burner Assembly Brass - C070
Burner assembly for the model 288 lanterns. The burner tubes are brass.
Burner Cap - 200/242 - C009
This is a new Coleman made burner cap for the the 200, 200A, 202, 243, 242 and 247 lanterns. Also fits a few lamps and Sears lanterns.
Also known as part number 2423231.Burner Assembly Steel Used - E1660
Burner Assembly for the model 288 lanterns. The burner tubes are steel. Will vary in wear.
Burner Screw 500 Stove - S73
1/2 inch long screw for the 500 stove. Requires two for the Cap and Fillers. See description tab for more details.
Burner Tube Canadian 200 - R418
Burner tube for the Canadian model 200 lantern. It is 1 5/8 inches long which is a little shorter than the US 200A burner tube.
Burner Tube Short/Slant - S135
Shorter burner tube for the model 220 slant lantern. Same as the normal 101-324 burner tube only a little shorter. Measures 2 1/4 inches long. Many of the slant 220 and 228 lanterns took shorter burner tubes.
Burner Assembly Complete, Used - U831
This is a used burner assembly that will fit models 220/228B through 220/228E. It will show signs of use but will be in good condition. Has the long vent rod for the taller vents. If you change the vent rod to a shorter one, (HERE) it would work fine for a 220F.
Burner Cap & Screen Reproduction - S33
New burner cap & screen for the model 236, 237 and 249 lanterns.
Solid brass with stainless steel screen.
Screw Burner Support, Used - E1576
Burner support screw for a 502 stove. Each stove requires 3 total.