Globes

This globe fits models 5177 and 5178.

The globe is 4-9/16" tall. Has a bottom outer diameter of 4-1/4" and a top diameter of 5".

This is an original old red letter replacement logo globe made in USA. This globe will fit models 5107, 5151, and 5152. The globe is approximately 4 inches tall. The top diameter is 5 inches. The bottom diameter is 3 13/16 inches.

This is a US made original globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. These are used globes but in very nice shape.

This is a German made Schott Suprax globe. The other side has Century Primus 8938 embossed on the globe. This globe is approximately 3 7/8 inches tall and has a 4 1/4 inch diameter.

USA made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

USA made pyrex red letter replacement globe. This globe will fit models 275, 275A, 621, 631A, 621B, 5114, 5114A, 5114B, and 5114C. It is approximately 5 1/4 inches tall. The large opening has approximately a 5 7/8 inch diameter. The smaller opening has approximately a 4 5/8 diameter. Same size as the Canadian 880 globe.

It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This is a replacement globe that fits models 214, 214A, 214B, 214C, 282, 282A, 288, 288A, 288B, 286, 286A, 286B, 321, 335, 5150, 5151, 5152, 5153, 5154, 5155, 5158, 5159, and 5417. Made in Mexico

It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This is a replacement globe that fits models 214, 214A, 214B, 214C, 282, 282A, 288, 288A, 288B, 286, 286A, 286B, 321, 335, 5150, 5151, 5152, 5153, 5154, 5155, 5158, 5159, and 5417. Made in Germany.

This globe will fit the Northstar lanterns. This globe is "Made in Mexico for Coleman."

Fits Lantern Model 5132. This is a brand new small globe - approximately 2 3/16 inches tall. Made in China.

This globe fits Century and Primus models 2274, 5400, and 7054.

This is a used READY-LITE Globe

Although used, it has been inspected for damage or defects. This globe will also fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

Used original Canadian green sunrise logo globe. 

This globe will fit models 236, 237, 237A, 635, 639, 639A, 639B, and 639C.

This is a used and very rusty mica globe. Has a large hole in the side - see photos.

It will also fit on any lanterns that would take a 220 size globe. It is 5 inches tall. It has a diameter of approximately 4 3/8 inches. Fits in a 327 burner frame very loosely.

This is an used original old red letter logo globe used on lanterns from 1960 to 1980. Although used it will be in good condition. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

This is a brand new clear globe that will fit models 200, 200A, 200B, 201, 202, 242A, 242B, 242C, 243, 243A, 234, 247, 249, 5101, 5120, 5121 and 5122. 

Top and bottom opening is 3-1/2", bulge width is 4-1/2" and is 4-1/16" tall.

Has also been reported to fit Austromax “Aussie Bush Light” very well.

This is a Coleman straight line globe. Used from 1936-1945. Made by Pyrex. Printing will vary from light to dark. Although used it will be in fine condition with no heat marks or other problems. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, 247 and 249. 

This is a used original old red sunrise logo globe "Made in U.S.A." for Canadian lanterns. It will not have any heat spots or other damage. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

This is an original used green sunrise logo globe made between 1946 and 1959. Although used, it has been inspected for damage or defects. 

The light green logo is very light as was common. The back has "PYREX" over "MADE IN USA"

This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Some of the markings are very light and hard to see.

This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. New part number 2000026613.

This is a US made replacement globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

This is an original used globe made between 1936 to 1945 for Coleman lanterns that used the 220 size globe. Although used, it has been inspected for damage or defects. Please note that the green straight line logo used on these globes was very lightly stamped and can sometimes be difficult to see. This was normal for the time period. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

Bernz O matic Porta Light globe. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

This is a Century Primus globe 8936. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

This is a used globe for an AGM lantern. Marked heat resisting. Made in U.S.A. The writing is in good shape - being faint is common on these.

Used 220 globe with the word Pyrex in green letters. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Small factory defect on upper lip (see photo).

German made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

Used made in Mexico white letter globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

This fits models 220, 228, 290, 290A, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. White Pyrex Label - made in USA.

This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

This is an original used globe made for the Coleman Mil-Spec lantern. This globe was used prior to the quadrant glass panes. Please note that the green logo used on these globes was very lightly stamped and can sometimes be difficult to see. This was normal for the time period. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

This is a used striped globe for the model 275. This globe will fit models 275, 275A, 621, 631A, 621B, 5114, 5114A, 5114B, and 5114C. It is approximately 5 1/4 inches tall. The large opening has approximately a 5 7/8 inch diameter. The smaller opening has approximately a 4 5/8 diameter. This globe is in good condition.

It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5153, 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.

It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 288, 288A, 288B, 286, 286A, 286B, 321, 335, 5150, 5151, 5152, 5153, 5154, 5155, 5158, 5159, and 5417.

It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This replacement globe fits models 214, 214A, 214B, 214C, 282, 282A, 288, 288A, 288B, 286, 286A, 286B, 321, 335, 5150, 5151, 5152, 5153, 5154, 5155, 5158, 5159, and 5417. Made in the USA.

Amber globe for the 288 size lantern. Has no manufacturer markings on it anywhere. It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 285, 288, 288A, 288B, 286, 286A, 286B, 321,325, 335, 5150, 5151 (A/B/C/D), 5154 (A/B), 5155 (A/B), 5159, 5417, 5419, 5428, & 5429.

Used Borosil globe. It is approximately 4 3/8 inches tall and has a 4 1/4 inch diameter. This globe fits models 214, 214A, 214B, 214C, 282, 282A, 288, 288A, 288B, 286, 286A, 286B, 321, 335, 5150, 5151, 5152, 5153, 5154, 5155, 5158, 5159, and 5417. 

Fits models 222, 226, 229, 3022, 3023, 3150, 5130, 5133, 5134, 5136, and 5414. This globe is approximately 3 3/16 inches tall and has a 3 3/16 inch diameter.

This globe will fit models 236, 237, 237A, 237B 635, 639, 639A, 639B, and 639C.

This is an original old white letter replacement logo globe. This globe will fit models 5107, 5151, and 5152. The globe is approximately 4 inches tall. The top diameter is 5 inches. The bottom diameter is 3 13/16 inches.

This is an original old red letter replacement logo globe made in Mexico. This globe will fit models 5107, 5151, and 5152. The globe is approximately 4 inches tall. The top diameter is 5 inches. The bottom diameter is 3 13/16 inches.

This globe will fit the Northstar lanterns.

Top and bottom openings OD is 4" wide x 6" tall.

This globe will fit the Northstar lanterns. This globe is "Made in Germany for Coleman."

This globe will fit the Northstar lanterns. This globe has "Made in U.S.A." stamped on the front.

This globe fits Century and Primus models 2274, 5400, and 7054.

Peak 1 globe.

This globe fits models 5156 and 5157. Will also fit model 335 Canadian lantern. The openings at both ends are approximately 4 1/4 inch. It is 4 1/4 inch high. Each globe has a $4 additional shipping amount added to it due to increased box size. If this is excessive, we will credit back your payment account automatically after shipping is complete.

This horizontally striped frosted globe is approximately 3 7/8 inches tall and has a 4 3/8 inch diameter.

This is a German made Schott Suprax globe. The other side has Century Primus 8938 embossed on the globe. This globe is approximately 3 7/8 inches tall and has a 4 1/4 inch diameter.

Fits Lantern Model 5132. This is a brand new small globe - approximately 2 3/16 inches tall.