5122

Peerless 2C-HG mantles, 4 per pack (M01). These are the most popular size mantles for many Coleman lanterns and lamps. Same size as Coleman 21A mantles and fit models including 200, 200A, 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5100 series, 5150 series, 9950, 9960 and most other Coleman pressure lanterns. Treated with thorium at the factory for bright white light. Known for being more durable and rugged than standard mantles. Made in India. Burn off outdoors first due to smoke.

Installation instructions are HERE if needed.

Coleman's Most Popular Sized Mantles. 4 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 252, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Also known as part number 3000004344.

Coleman's Most Popular Sized Mantles. 2 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 252, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Also known as part number 3000004345 or 2217976

Pal nut for the 200, 200A, 201 and 202 lanterns. Also used on some stoves.

Need the washers for under a 200 or 200A frame? Look HERE.

Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

Used, round headed valve wheel screw.  Will be in good condition. These fit many models. Over the years, they changed the types of screws to hold on valve wheels. Please compare how this looks to yours if ordering. These will not fit the 236 or 237. 

This is a reproduction stainless steel burner frame for the model 202. It will also work on all models  200, 200A, 201, 202, 5101, 5121 and 5122 lanterns.

New Coleman made Globe. It will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249. Top and bottom outer diameter is 3.25" and height is 4.25"

Also known as part number R690B051.

Lock Nut for the 200A lantern. Goes on the top end of the burner tube.

Stainless Steel burner frame to valve nut for the 200, 200A, 201, 202, 222, 222A, 222b, 237A, 237B, all the 242s, 321B, 325A, 331, 335, 339, 621A, 621B and 635 lanterns. May also fit other models and some stoves.

Need the washers for under a 200 or 200A frame? Look HERE.

Also listed in diagrams as part number 604A456.

Used bail handle for the model 200, 200A, 200B, 201, and 202 lanterns.

This is a new reproduction steel frame for burner frame for the models 200, 200A, 201, 202, 5101, 5121 and 5122 lanterns.

New reproduction vent rod for the 200A. This is the longer vent rod made for lanterns 1963 and earlier.

Brass burner cap with hex head for easy installation and removal. Fits most models of double mantle lanterns and lamps.

Solid brass with stainless steel screen.

Same part number as 112-323

Reproduction 200A Vent Rod Bracket Short. Made to fit the 1963 and later 200A's with the lower profile vent.

This is a very nice reproduction bail handle for the model 200, 200A, 200B, 201, and 202 lanterns. Made of spring steel here in the USA.

Steel burner cap for most models of double mantle lanterns and lamps. Has hex head for easy installation and removal.

Single Ball Nut. Fits all Coleman lanterns except the 242 type models. In good shape - just dirty.

This is a used Trailblazer globe. These are not Coleman globes but are the same size and were made in the USA about 20 to 30 years ago. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, 247, and 249.

This is a used part and has rust as shown. This is the newer style vent rod for 200A lanterns that took the shorter vent beginning in 1963. It will not work on early high vent 200 or 200A models.

Used, round headed valve wheel screw.  Will be in good condition. These fit many models. Over the years, they changed the types of screws to hold on valve wheels. Please compare how this looks to yours if ordering. These will not fit the 236 or 237. 

Also known as 425-175

Reproduction U tube and venturi for the model 200A lantern.

Fits the model 5122 propane lantern.

NOS nickel plated brass burner caps with hex head. Fits most models of double mantle lantern and lamps.

Reproduction bail handle for the model 200, 200A, 200B, 201, and 202 lanterns.

These bail handles are new but are not straight (shown in photos) - they can be fixed with some patience and a propane torch.

Vintage 200A Reproduction splined ball nut. Will fit all Coleman lanterns except the 242 type models.

Used Pal nut for the 200A lantern. Also used on some stoves.

Used Burner assembly for the model 200A lantern. 

Has the short tabs that were correct for the Christmas Lantern.

This is a used burner frame for the model 200A lantern.

This is a used burner frame for the model 200A lantern.

Full box of Peerless 2C-HG mantles – 25 packs of 4 mantles each (100 mantles total). These are the most popular size for many Coleman lanterns and lamps, the same size as Coleman 21A mantles. Fits models including 200, 200A, 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5100 series, 5150 series, 9950, 9960 and most other Coleman pressure lanterns. Treated with thorium at the factory for bright white light. Known for being more durable and rugged than standard mantles. Great bulk option for serious users or shops. Made in India. Burn off outdoors first due to smoke.

Installation instructions are HERE if needed.

This is a used newer style venturi that fits with a U Tube.

Used direction disk for the model 5120 lantern.

This is a used newer style U tube - does not come with venturi

This is a used USA made red letter replacement logo globe. Although used, it will be in good condition. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

This is a used USA made red letter replacement logo globe. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

This is a used part and has rust as shown. This is the newer style vent rod for 200A lanterns that took the shorter vent beginning in 1963. It will not work on early high vent 200A models.

Used Burner assembly for the model 200A lantern. 

Used Burner assembly for the model 200A lantern. 

N.O.S Steel burner cap for most models of double mantle lanterns and lamps. Has hex head for easy installation and removal.

Used Burner assembly for the model 200A lantern. 

Used Burner assembly for the model 200A lantern. 

Used Burner assembly for the model 200A lantern. 

Used Burner assembly for the model 200A lantern. 

Used Burner assembly for the model 200A lantern. 

NOS Venturi.

Coleman's Most Popular Sized Mantles. Full box of 50 mantles (2 per pack). 

Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Also known as part number 3000004345.

NOS Venturi.

Burner tube for the model 5120 and 5122 LP lantern.

Pack of 3 RAYTEX mantles. They are loose and do not come in original packaging.