5101

Peerless 2C-HG mantles, 4 per pack (M01). These are the most popular size mantles for many Coleman lanterns and lamps. Same size as Coleman 21A mantles and fit models including 200, 200A, 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5100 series, 5150 series, 9950, 9960 and most other Coleman pressure lanterns. Treated with thorium at the factory for bright white light. Known for being more durable and rugged than standard mantles. Made in India. Burn off outdoors first due to smoke.

Installation instructions are HERE if needed.

Coleman's Most Popular Sized Mantles. 2 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 252, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Also known as part number 3000004345 or 2217976

Pal nut for the 200, 200A, 201 and 202 lanterns. Also used on some stoves.

Need the washers for under a 200 or 200A frame? Look HERE.

Used generator nut for many Coleman models. These are in fine shape, just dirty.

Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

Lock Nut for the 200A lantern. Goes on the top end of the burner tube.

Stainless Steel burner frame to valve nut for the 200, 200A, 201, 202, 222, 222A, 222b, 237A, 237B, all the 242s, 321B, 325A, 331, 335, 339, 621A, 621B and 635 lanterns. May also fit other models and some stoves.

Need the washers for under a 200 or 200A frame? Look HERE.

Also listed in diagrams as part number 604A456.

Used bail handle for the model 200, 200A, 200B, 201, and 202 lanterns.

This is a new reproduction steel frame for burner frame for the models 200, 200A, 201, 202, 5101, 5121 and 5122 lanterns.

New reproduction vent rod for the 200A. This is the longer vent rod made for lanterns 1963 and earlier.

Reproduction 200A Vent Rod Bracket Short. Made to fit the 1963 and later 200A's with the lower profile vent.

This is a very nice reproduction bail handle for the model 200, 200A, 200B, 201, and 202 lanterns. Made of spring steel here in the USA.

Single Ball Nut. Fits all Coleman lanterns except the 242 type models. In good shape - just dirty.

This is a used part and has rust as shown. This is the newer style vent rod for 200A lanterns that took the shorter vent beginning in 1963. It will not work on early high vent 200 or 200A models.

Reproduction U tube and venturi for the model 200A lantern.

NOS Jamb Nut for all the model 200, 242, 243, 220, and 228 models. Came from an old parts bin in a Coleman service center.

Reproduction bail handle for the model 200, 200A, 200B, 201, and 202 lanterns.

These bail handles are new but are not straight (shown in photos) - they can be fixed with some patience and a propane torch.

Reproduction generator nut for all the model 200, 242, 243, 220, and 228 models.

Vintage 200A Reproduction splined ball nut. Will fit all Coleman lanterns except the 242 type models.

Used steel generator nut. Steel nuts were used on wartime 242B, 220BX, and 220C lanterns. These will show some rust.

This is a used original old red letter logo globe used on lanterns from 1960 to 1980. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

Full box of Peerless 2C-HG mantles – 25 packs of 4 mantles each (100 mantles total). These are the most popular size for many Coleman lanterns and lamps, the same size as Coleman 21A mantles. Fits models including 200, 200A, 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5100 series, 5150 series, 9950, 9960 and most other Coleman pressure lanterns. Treated with thorium at the factory for bright white light. Known for being more durable and rugged than standard mantles. Great bulk option for serious users or shops. Made in India. Burn off outdoors first due to smoke.

Installation instructions are HERE if needed.

This is a used newer style venturi that fits with a U Tube.

This is a used newer style U tube - does not come with venturi

This is a used Pyrex replacement globe used on lanterns from 1960 to 1980. This globe will fit models 200, 200A, 200B, 201, 202, 234, 241, 242A, 242B, 242C, 243, 243A, 247, and 249.

Used Burner assembly for the model 200A lantern. 

This is a used one-piece old-style U-tube venturi. 

Some may be dirty.

This is a used USA made red letter replacement logo globe. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

NOS valve stem for the 220 and 228 slant lanterns. Also fits the 4, 4A, 8, 8A, 12, 609 & 609A irons that use the 604-299 (generator similar to the R55), LP 5101 Lantern and the pre- heater valve on a handy gas plant with the 501 burner. Will also work on Lamp models 117, 118, and 119 but has a different style of valve wheel.

Used Burner assembly for the model 200A lantern. 

NOS Venturi.

This is a used Pyrex old red letter logo replacement globe used on lanterns from 1960 to 1980. This globe will fit models 200, 200A, 200B, 201, 202, 234, 241, 242A, 242B, 242C, 243, 243A, 247, and 249.

Has one small burn mark - please see photos.

This is a used old Pyrex Bernz-O-Matic globe. It is the same size as a Coleman 200A globe. This globe will fit models 200, 200A, 200B, 242A, 242B, 242C, 243, 243A, 234, 201, 202, and 249.

The light green logo is very light as was common on these.

NOS Venturi.