Decals

White Border Logo with "Reg.", & "Lantern". For 1971 to 1983 200A, 220 & 228 F, H, & K Lanterns. Also fits 502 stove and the 335, 236A, 237A Lanterns.

White Border Logo with "Reg.", "Pats. Pending" & "Lantern" for 1965 to 1971 200A, 220 & 228 F Lanterns. Also fits the 220G, 

No Border Logo with "Reg." & "Lantern" for 1961  to 1964 200A, 220 & 228 E & F Lanterns

Yellow Border Logo Used on Coleman 200A Lanterns 1954 to 1960 "Reg."

Coleman Lantern Logo for 1955 to 1961 220 & 228 E Lanterns

Yellow Border Logo Used on Coleman 200A Lanterns 1952 - 1953

Coleman Lantern Logo for 1951 200A and 1951 thru 1954 220 & 228E Lanterns

Lighting Instruction Decal for Coleman 502 Stove

Coleman Logo For Model 201 Kerosene Lantern

Coleman Lantern Decal - Fits 1954 to 1964 202 Lanterns

Early Sears Lantern Replacement Decal

Fits 1961 200A Lanterns - Yellow Border Logo

Coleman Decal For Pre-1963 Camp stoves. These are large decals and are for suitcase type stoves. Small stoves like the model 502 would use a lantern decal D11. This decal measures approximately 3 1/4 inches wide and is 1 1/8 inches high.

Replacement decals for All Military Lanterns ~ Set of Three Decals

Coleman Decal for Stoves Made After 1964 With White Border. These are large decals and are for suitcase type stoves. Small stoves like the model 502 would use a lantern decal D11. This decal measures approximately 3 1/4 inches long and is 1 1/4 inches high. Also would work well for car window, notebooks, etc.

Instruction Decal for 1945 to 1946 220C & 228C Lanterns. Also fits some 220D & 228D Lanterns

Coleman Decal For some Canadian Made Lanterns. Decal measures approximately 2 1/2 inches long and is one inch tall. This matches the earliest vinyl style of the decal on a few of the 200 Canadian lanterns made around 1955

Decal for the later 202 lanterns

Coleman Logo For Model 214 Kerosene Lantern

Coleman Logo for Camp stoves Made After 1963. These are large decals and are for suitcase type stoves. Small stoves like the model 502 would use a lantern decal D11. Measures approximately 3 " across the top and is 1 1/8 inches high.

For the model M1950 or 536 stove.

The decal maker made a mistake on this run. Rather than the word kerosene being in black like it should be, he made it red. Kind of a cool decal for a custom lantern.

Pointed Bottom Sears Lantern Replacement Decal

Decal for the Thermos lantern. It is approximately 2 1/2 inches long and is 1 1/4 inches high at the widest point. The background silver is too sparkly on these. Reduced price to sell.

Replacement Decal/Logo for 275 Lantern - Red Chrome

Rectangle Later Sears Lantern Replacement Decal

Replacement Decal for 520 or 523 Military Stoves

Coleman Decal For Canadian Made 1954, 200 Lantern

Decal for Kamplite lanterns

Decal for some styles of the Canadian kerosene lanterns.

Ted Williams replacement decal for Sears Ted Williams lanterns

Decal for the model 237B kerosene lantern

This is for the 4m stove, and says "Prevent Forest Fires". Larger than most decals and is  3-3/4" x  1-3/4"

This is the decal used on the early painted 220D/228D transitional lantern.

Decal for Kamplite lanterns.

Decal for the 4M & 5A stove. This one says "Prevents forest fires." Measures approximately 4 1/8 inches wide and is 1 3/4 inches high. Around 1965 They changed the decal to something different.

Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Diamond logo decal. It is approximately 3 1/4 inches wide and 1 5/8 inches tall.

Decal for the JC Higgins lantern. Measures approximately 2 1/4 inches wide and 1 1/8 inches high.

Window decal for glass or a hard surface - gloss white in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2.5" tall by 2" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss white in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2" tall by 3.5" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Large diamond logo decal. Measures 6 X 3 1/8 inches. Used on Coolers/Jugs

Original one piece decals for the later SMP military lanterns. These are not reproductions. They came from the old stock of the factory when it closed.

Dark Red Border Logo with "Reg.", & "Lantern". For "Some" 1971 to 1983 200A, 220, 228, 335, 236A, 237A Lanterns. This and the D11 were used interchangeably on the same lanterns/stoves. Compare with your original.

Bernzomatic lantern decal with UL.

Decal for Kamplite lanterns.

Decal for the Thermos "Holiday" lantern.

Window decal for glass or a hard surface - gloss green in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2" tall by 3.5" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle

Window decal for glass or a hard surface - gloss red in color. Can also be used on any hard surface - laptop, toolbox, water bottle, etc.

Decal is 2" tall by 3.5" wide.

Instructions:

1. Pull off back side solid paper - pull at a sharp angle
2. Apply to clean and dry window or hard surface
3. Apply pressure through front clear plastic with a credit card making sure it is adhered well to the new surface
4. Carefully peel off clear plastic - also at a sharp angle