Cooler Parts

White Drain Plug is 1 1/4 inches overall length. 

Fits various coolers including models 5214, 5235, 5236, 5239, 5242, 5243, 5244, 5245, 5248, 5254, 5255, 5256, 5265, 5269, 5275, 5276, 5278, 5279, 5280, 5282, 5283, 5284, 5286, 5287, 5288, 5290, 5293, 5294, 5295, 5296, 5298, 5299, 5835, 5837, 5848, 5850, 5854, 5856, 5862, 5882, 5883, 5886, 5888, 5894, 5895, 6151, 6154, 6155, 6161, 6240, 6250, 6261, 6262 and 6268. See the bottom of your cooler to find the model number.

This drain assembly replaces drain assembly 5214B5071. Is interchangeable with part number 5214B5111. The only difference is the color.

Also known as Coleman part number 3000005299.

Made by Coleman. 2 hinges, 8 screws included. Packaged in Coleman branded bag. Coleman cooler plastic hinge set. Hinge size: 2" H x 2.25" W.  Center of screw holes: Width = 1.5", Height - adjustable between 1-1/4" to 1-1/2".

Most coolers have the model number on the bottom. Review our parts diagrams for your model visually if you cannot locate the model number. Parts diagram page is HERE.

For use on the following Coleman Cooler Models: 5226 5227b 5240 5241 5241a 5245 5250 5255 5256 5297 5298 5299 5299a 5848 5850 5862 5884 5887 5896 6050 6154, 6155, 6200 6201 6240 6250 6251 6257 6260 6262 6263 6270 6273 6281 6286 6296 6297, 6298, 6498, 6499; UPC: 07650139946. 

Also known as Coleman part number 3000005298. Can be interchanged with previous part numbers 6262-1141, 5256-1851, and 5283-1141.

Steel Cam Latch. Will not work on the steel belted coolers made before 2000.

Also known as part number 5010005238.

Same as part number 5214D607G except for the drain plug length. This one has a length of a little over 1 1/2 inches.

Also known as part number 5010005241.

Black latch assembly for the Steel Belted 6150 & 6155 coolers. May fit other models.

Faucet

Hinge Package - White in color.

O ring for the spout on the 5590 5590A, 5591A, 5596, 5596A, and 5592A jugs.

Made by Coleman. 2 hinges, 8 screws included. Packaged in Coleman branded bag. Coleman cooler Stainless Steel hinge set. Hinge size: 2" H x 2.25" W.  Center of screw holes: Width = 1.5", Height - adjustable between 1-1/4" to 1-1/2".

Most coolers have the model number on the bottom. Review our parts diagrams for your model visually if you cannot locate the model number. Parts diagram page is HERE.

For use on the following Coleman Cooler Models: 5226 5227b 5240 5241 5241a 5245 5250 5255 5256 5297 5298 5299 5299a 5848 5850 5862 5884 5887 5896 6050 6154, 6155, 6200 6201 6240 6250 6251 6257 6260 6262 6263 6270 6273 6281 6286 6296 6297, 6298, 6498, 6499; UPC: 07650139946. Coleman part number 3000005298. Can be interchanged with previous part numbers 6262-1141, 5256-1851, and 5283-1141.

Also known as part number 3000005301.

Latch cover for the old steel belted coolers.

Hinge package. No screws required.

Grommet for cooler drain assembly.

Faucet for water jugs / buckets.

Spring for 5255 latch assembly.

Handle.

Spout cap

Wrench used to remove diamond cap drain assembly. Fits in interior drain hole for storage. These have been in storage on a shelf for a long time and may show some surface rust.

Jug cap that fits most Coleman jugs. Does not have a gasket - this is the cap only. Will need a gasket to seal well.

New old stock Coleman decal. Metal stick on type.

Pour spout assembly. New old stock but in not too good cosmetic condition.

Diamond logo jug cap.

Spout Cap

Latch Hook

Faucet Assembly

Drain assembly.

Green faucet assembly for the green picnic jugs.

Handle

Metal latch decal. Measures 2" x 3/4" Peel and stick

Pin

Latch decal.

Blue handle pin

Latch assembly. Fits 5217A Cooler and possibly others. Check THIS diagram.

New plastic hinge - unknown cooler.

Handle Light Gray