117

Peerless 2C-HG mantles, 4 per pack (M01). These are the most popular size mantles for many Coleman lanterns and lamps. Same size as Coleman 21A mantles and fit models including 200, 200A, 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5100 series, 5150 series, 9950, 9960 and most other Coleman pressure lanterns. Treated with thorium at the factory for bright white light. Known for being more durable and rugged than standard mantles. Made in India. Burn off outdoors first due to smoke.

Installation instructions are HERE if needed.

This gasket is for the model 227, 427, 220/228 Slant lanterns, most winged style fuel caps, early 220B's, and other similar lanterns and lamps that have the older style cap insert.

It is the same outside diameter as the common three piece cap gasket but has a smaller inside hole. 

Old part number 115-1361. 

This will not seal the typical Coleman lantern cap.

Coleman's Most Popular Sized Mantles. 4 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 252, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Also known as part number 3000004344.

Burner screen for double mantle lanterns and lamps. Fits 220s, 228s, 117, 129, 129G and CQ lamps. Fits most double mantle lanterns and lamps with small burner caps.

Coleman's Most Popular Sized Mantles. 2 mantles per pack. 

Use on these lanterns: 200, 201, 214, 220, 228, 252, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

Also known as part number 3000004345 or 2217976

New R55 generator designed for early Coleman models. This is a common upgrade for older lanterns and lamps. Lanterns: Air-O-Lantern, 327, 427, and 220/228 Slant. Lamps: CQ series, 117, 130G-K-P, 131P.

This is a quality made reproduction Q99 generator made here in the USA that fits the older Coleman QuickLite style lanterns and lamps. 

Will fit these models: 117, 117A, 118A, 119A, C331, CQ, Model B and Model C Lamps. Poultry, 227, 327 and 427.

Reproduction lamp globe for the later style Coleman lamps. This globe measures 5 7/8 inches tall. The top rim opening has a 3 inch diameter. The bottom opening has a 3 5/16 inch diameter. It bulges out at the widest point to about 5 inches. Also called the 355 globe.

Interchangeable with the Q99 or R55 generator. Fits the model 327, 427 and Slant 220 lanterns. NOS - This does not come in original packaging.

New reproduction hanging rod. Fits all Coleman lamps. Approximately 11 1/2 inches long.

This is a reproduction lamp globe holder that allows you to use a common 220 size globe on your lamp. The original lamp globes are expensive and this is a great alternative. Burn your old lamps and no longer worry about breaking a rare globe. Globe is not included.

Reproduction burner tubes that fit the 117, 117A, 118, 118A, 118B, 119, 132P Lamps. Also in the 220 and 228 Slant lanterns.

These measure 2-1/2 inches long.

Steel body Q77 generator. Probably made during WWII or possibly even WW1. New old stock but very tarnished from age.

Reproduction generator nut for the Q77 generator. Same gen nut also used on the Q99 and R55 too. Also fits on iron models 4, 8 and 8A.

NOS Old Style R55 generator with the square nut.

Packaging may vary from what is pictured.

Amish style filler plug for the early Quick-Lite lanterns and lamps. Does not use an air stem and requires a hand pump.

Interchangeable with the Q99 or R55 generator. Fits the model 327, 427 and Slant 220 lanterns. NOS - This does not come in original packaging and they are rusty on the outside. They are made of steel.

Full box of Peerless 2C-HG mantles – 25 packs of 4 mantles each (100 mantles total). These are the most popular size for many Coleman lanterns and lamps, the same size as Coleman 21A mantles. Fits models including 200, 200A, 201, 214, 220, 228, 249, 275, 282, 285, 286, 288, 290, 295, 5100 series, 5150 series, 9950, 9960 and most other Coleman pressure lanterns. Treated with thorium at the factory for bright white light. Known for being more durable and rugged than standard mantles. Great bulk option for serious users or shops. Made in India. Burn off outdoors first due to smoke.

Installation instructions are HERE if needed.

NOS Old Style R55 generator with the square nut.

They are not in original packaging and some of the square nuts are rusted.

NOS valve stem for the 220 and 228 slant lanterns. Also fits the 4, 4A, 8, 8A, 12, 609 & 609A irons that use the 604-299 (generator similar to the R55), LP 5101 Lantern and the pre- heater valve on a handy gas plant with the 501 burner. Will also work on Lamp models 117, 118, and 119 but has a different style of valve wheel.

NOS generator nut for the Q77 generator. Same gen nut also used on the Q99 and R55 too. Also fits on iron models 4, 8 and 8A.

NOS R55 generator with the square nut. Will fit on Lamp Models 117, 130G, 130K, 130P, 131P, 156, 158, 159, 168, 169X & other. Will fit on Lantern Models 327, 427, and Slant 220/228.

Packaging may vary from what is pictured.

Pack of 3 RAYTEX mantles. They are loose and do not come in original packaging.