Generator for Geniol lanterns. Measures 4 5/8 inches long.
Generator for the 2 mantle Unimet GL4 lantern. Measures 3 1/4 inch long.
Used generator for the model 8326 Thermos lantern. These fit also the Wards/Western Field Model 60-9523 and some AGM lanterns that use part number S7706.
These generators come in different conditions - all show wear and signs of use. The pricker rods are good in each and move freely.
I believe these generators are for an AGM iron. They measure 4 inches long.
Generator for American Ready lite lanterns. They are 4 5/8 inches long.
This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.
Generator for AGM lanterns. Measures 3 1/8 inches long. Fits the AGM model 3025 lantern. Thanks to Joe P. for this information.
Reproduction Gloria generator that used the tapered threads on the end. Generator measures 4 1/2 inches long.
Generator for an AGM lantern. Measures 3 9/16 inches long.
Generator for some model of AGM lantern. Measures only 1 9/16 inches long.
Generator coil. Measures 7 1/4 inches long and the width is 7/32". Made of steel.
Used Generator seat for the military lantern.
This is a 10 PACK of the cardboard tube that goes inside of the 200A and 220 size generators, and many others.
Reproduction generator for the model 27 hollow wire fixture. Measures 7 3/8 inches long.
Generator for some model of AGM lantern. Measures only 1 9/16 inches long. Missing the tip cleaning needle.
Generator needle. Measures 3 1/2 inches long.
This is a new, Coleman made generator for Model 214 and 214A Coleman Lanterns. Each includes new gas tip, spring, and tip cleaning wire.
These are also known as part number 3000005092.
New Generator for Model 226A700 and the 226-700. New generator includes new gas tip, spring, and tip cleaning wire.
Also known as part number 3000005088.
This also fits 222 models, but please read on.
Coleman discontinued the 222 generator, and they recommend this as the replacement now. In practical use, people have found that it will work and work well, but the heat shield will need fabrication or if using this on a 222, you should install a different heat shield set up out of a 226/229 lantern. The heat shields are not a part that can be ordered as they have been discontinued. This generator is wider/fatter than the original 222 generator and essentially conflicts with the heat shield. The part number for the heat shield is 5414-4605.
Fits Coleman stoves model 393, 396, 396LC, 396A, 396A-LC, and 397
Generator for models 3024-701, 400B701 AND 400B7014.
Fits models 413E, 413F, 413G, 426B, 426C, 426D, 442, 442A, and 443. New generator includes new gas tip, spring, and tip cleaning wire.
Also known as part number 3000005106.
Control Valve & Generator Assembly Complete 414/428
New Coleman made valve & generator. This part fits: 413B, 413C, 413D, 413E, 413F, 413G, 426D, 442, Sears 476.72302, 476.72303, 476.74970, 476.74980
Iron generator. Used on the model 4, 4A, 609, and 609A irons.
Generator for the Denali model 9790 stove.
Reproduction generator spring for 200, 200A, 220, 228, 242, 243, 202 & Similar Sears Lanterns.
New Needle for the 237 generator. This is a reproduction part.
Original NOS generator nut for the Milspec lantern. Military part number 6260-00-161-1859
This is a new old stock generator.
Fits Military model 252 lantern. Also other non Coleman military lanterns
Reproduction generator nut for the 335 and 621 lanterns.
Valve and generator for stoves 393, 396, 396LC, 396A, 396A-LC, and 397.
New Coleman made valve and generator. This part will fit: 2G, 2H, 9A, 9B, 9G, 9H, 415C, 415D, 416B, 416C, 421, 421C, 421D, 421E, 425, 425B, 425C, 425D, 425E, 425F and Sears 476.72301, 476.74960, and 476.72244.
Coleman 605 Iron generator. Gas tip marked D.
Valve and Generator. Fits the model 413H and 426E stove.
Generator Coil. Rusty.
Fits 426B, 426C, 413E, 413F, 413G, 442, 442A and 443 stoves.
NOS Generator Coil for models 425s, 415C, 415D, 416 B. 416C, 2G, 9G, 2H, 9H, 2B, 9A, 9B, 417B, 4F, 6F. 6B, 412B, 421, 421D, 391 and 391A.
Thermos generator for models 8311 and 8312. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.
Generator for the Canadian model 519 heater. New generator includes new gas tip, spring, and tip cleaning wire. Also known as 519-2991.
Propane stove generator for the model 3025 backpack stove.
Generator for the 9950 Powermax propane lantern.
Spring for the inside of the 236 generator.
Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.
This is a reproduction generator for the first Coleman lantern, the Arc lantern. Also fits the model 319.
