Search

New Reproduction Generator for Model 237 Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.

Used generator nut for the 335 and 621 lanterns.

Generator nut for the model 214, 222, 229, 286, 288 290, 635 and 639 lanterns.

New Generator for Model 226A700 and the 226-700. New generator includes new gas tip, spring, and tip cleaning wire.

Also known as part number 3000005088.

This also fits 222 models, but please read on. 

Coleman discontinued the 222 generator, and they recommend this as the replacement now. In practical use, people have found that it will work and work well, but the heat shield will need fabrication or if using  this on a 222, you should install a different heat shield set up out of a 226/229 lantern. The heat shields are not a part that can be ordered as they have been discontinued. This generator is wider/fatter than the original 222 generator and essentially conflicts with the heat shield. The part number for the heat shield is 5414-4605. 

This is a new, Coleman made generator for Model 214 and 214A Coleman Lanterns. Each includes new gas tip, spring, and tip cleaning wire.
These are also known as part number 3000005092.

New  Needle for the 237 generator. This is a reproduction part.

Used generator for the model 413E and 443 stoves according to early part diagrams. 

I believe it is the same generator as part number 413A5621. 

This is the earlier style with the square soldered on nut which does make it easier to install. Comes with tip needle, coil and housing. This one is in good shape.

NOS Generator Coil. 

Fits 426B, 426C, 413E, 413F, 413G, 442, 442A and 443 stoves.

This is a new Coleman made generator. Each includes new gas tip, spring, and tip cleaning wire. This will fit models: 425, 425B, 425C, 425D, 425E, 425F, Sears 476.72301, 476.72244 & 476.74960.
Also known as part number 3000005108.

Valve minus the generator for the model 425 series stoves.

Reproduction generator needle for the model 500 and for the 345 kerosene marine stove.

Reproduction generator nut for the 500 and 500A stove.

Fits lantern model 325, not 325A. New generator includes new gas tip, spring, and tip cleaning wire. New old stock - some come in different packaging that what is shown.

This is a reproduction generator for the very rare 238B lantern. These generators have been impossible to find for many years. Now you can get that rare 238B of yours running again. They were not cheap to get made but the workmanship is excellent. New generator includes new gas tip, spring, and tip cleaning wire.

This is a reproduction generator nut for the first Coleman lantern, the Arc lantern.

Reproduction generator nut for the 252 military lantern. Made of brass.

Generator needle for the model 238B lantern.

For Coleman Double-Mantle Kerosene Lanterns like the 231 and 235. This may fit and work on a 206 also. Another name for this is the T44.  It is the kerosene version of the 220E generator.

Reproduction generator nut for the Q77 generator. Same gen nut also used on the Q99 and R55 too. Also fits on iron models 4, 8 and 8A.

Don't know the part number for this valve and generator. It measures 10 1/4 inches long from tip to end of nut. 

New Reproduction Generator for Model 222, 222A, 222B and the 229. Generator includes new gas tip, spring, and tip cleaning wire.

Thermos generator for inverted lantern models 8319 and 8321. Also fits Kamplite and JC Higgins inverted lanterns. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, BUT DOES NOT HAVE a tip cleaning wire.

These are limited Coleman made beautiful chrome plated generators.

Fits model 426E, 413H, 432, 433 stoves. New generator includes new gas tip, spring, and tip cleaning wire. Same as part number 426-562C.

Also known as part number 3000005105.

Generator for the 2 mantle Unimet GL4 lantern. Measures 3 1/4 inch long. Has no internal needle.

This is a N.O.S Coleman made generator. Each includes new gas tip, spring, and tip cleaning wire. This will fit models: 425, 425B, 425C, 425D, 425E, 425F, Sears 476.72301, 476.72244 & 476.74960.
Also known as part number 3000005108.

Some come in original packaging and some do not.

This is a new Coleman made generator for lantern models 282 and 285. Includes a new gas tip, spring, and tip cleaning wire.
Also known as part number 3000005622.

Generator Needle For Northstar Lantern 2000-750T 2000-750 2000-750E 2000A750. This is a reproduction part.

Compatible with 635 and the 621 series lanterns. This is a reproduction part.

New Generator for 201, 241 and 247 Kerosene Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.
Also known as part number 242K289, 201B5891 and 3000005402.

Fits the model 450-700 stove.

Fits stove models 508, 400, and 400A. Also known as 400-5891

Reproduction generator for the Sunshine Safety lanterns and lamps. Similar to the Coleman Q99 but has a different nut. Will not work on Coleman lanterns and lamps.

New old stock generator for the Aladdin PL1 lantern.

Reproduction generator for the AGM model LRL21, LRL21A, LRL22, KL2, and JC Higgins model 710.7400, 710.74001 lanterns. Part number on JC Higgins parts diagram is 7110 - Generator Assembly

Reproduction Generator for 200, 200A, 202, 242, 243, 243A & Similar Sears Lanterns. New generator includes new gas tip, spring, and tip cleaning wire. The generator is complete and you need nothing else for the install.
Same as the old part numbers T66, 200A2891 and 3000005089.

This is a new Coleman made generator. Each includes new gas tip, spring, and tip cleaning wire. This will fit models: 425, 425B, 425C, 425D, 425E, 425F, Sears 476.72301, 476.72244 & 476.74960.
Also known as part number 3000005108.

Does not come in original packaging.

New generator includes new gas tip, spring, and tip cleaning wire.

This fits the 321, 331 and the 335 models.

Reproduction generator for the model 500 and 500A stove. New generator includes new gas tip, spring, and tip cleaning needle.

New generator needle. This is a reproduction part. This fits the 321, 331, 335 and the 339 models.

Interchangeable with the Q99 or R55 generator. Fits the model 327, 427 and Slant 220 lanterns. NOS - This does not come in original packaging and they are rusty on the outside. They are made of steel.

Generator W/O nut, for 450A700 stove

This is a new generator that fits stove models 400B, 440, 442, 508A, 508B, 533, and 533A. 

Also known as part numbers 3000005101, and 442-5891

Large Military generator. New generator includes new gas tip, spring, and tip cleaning wire. Does not fit the 520, 523 or 530. Much bigger.

Reproduction 502 needle assembly

For the model 520 stove. New generator includes new gas tip and tip cleaning wire. LINK for great info on these and what they fit.

Additional info: The 520 (aka M1941) and M1942 generators are usually interchangeable. The only exception is the early version of the M1942, known as the Mountaineer Stove.  It has a vertical sprocket-type valve wheel.  The generator on that stove seems to be unique in that it's a bit shorter than the later version.

NOS maintenance kit for the 639 and 635B Lantern. Comes with a new generator, neoprene pump cup and push on nut.

NOS valve assembly for the model 201 kerosene lantern.

Needle for the 740 stove generator.

Valve stem complete less needle for Generator 950-262