- May 1, 2024Gather 'round, fellow GPA enthusiasts!Our annual convention is fast approaching, and guess what? It’s practically in our backyard—just 40 miles from our OCP home! June 27 to 29, 2024
Search
39 products found
Sort by:Price Low - High
- Free Shipping
Fuel Tip - E1195
Fuel tip used on the end of the fuel tubes of early 220/228B lanterns, 236 and some lamps.
- Free Shipping
O-Ring - S21
Fits the fuel tube on all appliances that have a plastic fuel and air tube.
Models: 214, 282, 285, 288, 290, and 295.
Also fits:
- The fuel tube on the 550B stove
- On the propane regulator of a model 2000004489 Perfect Flow Skillet (reported by a fellow Coleman user). Propane regulator #9933-5251
200A Used Fuel Tube Spring - E1023
Used spring for the fuel tube spring on the model 200, 200A, 202 and 242 series lanterns. Also for the 530 pocket stove.
Fuel Tube Spring - S26
Reproduction spring for the fuel tube spring on the model 200, 200A, 202, 220 series, 228 series, and 242 series lanterns. Also for the 530 pocket stove and most likely many others. Overall measures 9/16" long, OD of 5/32" and an ID of approximately 1/8".
Thermos Fuel Tube 2 5/8 Inch - E1057
Fuel tube and screen for Thermos appliances. It is 2 5/8 inches long.
Fuel Tube Spring, Steel - R581
New steel fuel tube spring for the models 200, 200A, 202, 220 series, 228 series, and 242 series lanterns. Also for the 530 pocket stove and most likely many others. Overall measures 9/16" long, OD of 3/16" and an ID of approximately 1/8".
Fuel and Air Tube - E1432
Fuel and Air Tube for many stoves. Same as part number 425-6461.
Fits 2G, 2H, 4F, 6B, 6F, 9A, 9B, 9G, 9H, 415C, 415D, 416B, 416C, 417B, 425 models, 500, &500A.Fuel and Air Tube Needle Used - E1077
Used Needle for the fuel and air tube inside the fount. Used on 220 and 228 series lanterns up thru model F and the 118B lamp.
- New!
Thermos Strainer Screen - E1185
Fuel tube screen for Thermos and some AGM stoves. Also know by AGM part number 42-833.
Thermos Fuel Tube 2 1/2 Inch - E461
Fuel tube and screen for Thermos stoves. It is 2 1/2 inches long.
Thermos Fuel Tube 3 7/8 Inch - E1083
Fuel tube and screen for Thermos products. It is 3 7/8 inches long.
- Free Shipping
Turm-Sport Gasket Set - S170
Only 3 left in stockTerm-Sport Alcohol Stove Gasket Set. These gaskets are for the filler cap and the burner tube. Both are made from fuel resistant materials that will last for years (ECH - Cap & Viton - Burner Tube).
- New!
Unknown Thermos Fuel Tube - E1141
Only 7 left in stockUnknown fuel tube. Pretty sure they are for Thermos.
Feed Tube - 282/285/286/288 - C010
New feed tube assembly made by Coleman. Includes new Schrader valve and O-ring. Fits all 282, 285, 286, and 288 model lanterns.
M1950 Pump Rebuild Kit - K05
This is a complete rebuild kit for the pump on an M1950 stove. You will get the cap gasket, check valve dot, fuel tube gasket and pump leather.
- Free Shipping
O-Ring Repair Kit - K13
This kit includes two blue Flourosilicone O-rings for the valve stem and one Viton black ring for the fuel & air tube attached to the bottom of the valve. They are the proper replacement size for these models: 222A, 222B, and the 226.
Unknown Fuel Tube - E1592
Only 1 left in stockUnknown fuel tube possibly for a stove. Measures 5 3/4" long.
Don't know if it is used or NOS.
Fuel Air Tube Reproduction - R414
Reproduction shorter fuel and air tube for the double mantle Sears lanterns made by Coleman.
- New!
Valve Assembly Old B Style Used - E1285
This is a used valve assembly for the model 220/228B lanterns. It has the drain plug. Has the older style fuel and air tube. This valve has a square stem head and will not work with a more modern valve wheel. This valve was used on the 220/228B lanterns and on the early 220/228C lanterns. Packings have not been replaced.
200A Fuel Tube Reproduction - R304
Reproduction fuel tube for the model 200, 202 and 242 series lanterns. Also fits the 530 stove.
288 Valve Assembly - C021
This is a new Coleman made valve assembly. Includes the valve, knob w/screw, fuel pick up tube and eccentric block. Fits both the 288 and 288A lanterns.
Lamp Valve - E1111
New lamp valve for models 129, 134, 138, 150 kerosene lamps. I believe I have identified the correct part number but am not 100% sure. This valve screws directly on to the upright pipe. It does not have threads to screw on a fuel and air tube. It takes a 220 body generator body. When looking straight at the valve wheel the tip cleaner is on the right and the air tube would be on the left.
- New!
Valve 152, NOS - E1413
Valve assembly for the 152 lamp. It also might be for a 132 lamp. I believe I have identified this part correctly but am not 100% sure. It has threads on the outside of the valve bottom so it would screw into rather than on the lamp. It also has threads for a fuel and air tube to be screwed into the bottom. It would take a 220 size generator body. When looking at the valve wheel, the tip cleaner mechanism would be on the left and the air tube would be in the back.
- New!
Valve 152, NOS - E1278
Valve assembly for the 152 lamp. It also might be for a 132 lamp. I believe I have identified this part correctly but am not 100% sure. It has threads on the outside of the valve bottom so it would screw into rather than on the lamp. It also has threads for a fuel and air tube to be screwed into the bottom. It would take a 220 size generator body. When looking at the valve wheel, the tip cleaner mechanism would be on the left and the air tube would be in the back.
Fuel Tube HGP - R409
Reproduction fuel tube for the Model 457, 460 and 575 Handy Gas Plant. Also fits stove models 375, 375A, and 376.
130 & 131 Lamp Valve, NOS - E1176
Lamp valve for 130G, 130K 130P and 131P. The bottom is threaded for a fuel and air tube to be attached.
GPA Starter Toolbox Kit - K22
Here is a kit of the most commonly used parts when repairing most lanterns and stoves. Buying kits saves in overall cost and comes with free shipping anywhere in the USA.
- 4 new Coleman check valves
- 10 Leather pump cups - pre-oiled
- 5 Neoprene rubber pump cups
- 10 Large valve stem packings for 1/4"
- 5 Small valve stem packings for 3/16"
- 10 Generator tube packings
- 10 One-piece fuel cap gaskets
- 10 Three-piece fuel cap gaskets
- 10 Cap gaskets sized for the 242 or 500 stoves
- 20 Peerless Mantles with Thorium 21A size for most double and single mantle lanterns