These are from used generators - they are straight with no gas tip or pricker rod inside. They will most likely need to be cleaned to be used. The interior may be clear, or it may have remnants of old internal packing/springs.
Used cardboard tube that goes inside of the 200A and 220 size generators, and many others.Â
Fits the model 5114 and 5114A propane lanterns
Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.
Used generator nut for the 335 and 621 lanterns.
Generator Coil. Rusty.Â
Fits 426B, 426C, 413E, 413F, 413G, 442, 442A and 443 stoves.
This is the cardboard tube that goes inside of the 200A and 220 size generators, and many others.
Used Generator nut for the model 214, 222, 229, 286, 288 290, 635 and 639 lanterns.
NOS Generator Coil for models 425s, 415C, 415D, 416 B. 416C, 2G, 9G, 2H, 9H, 2B, 9A, 9B, 417B, 4F, 6F. 6B, 412B, 421, 421D, 391 and 391A.
Used generator body only. This is only the brass tube of the generator and the gas tip. May or may not have the internal spring and packing tube. No needle is with this.
Fits the model 5419 Propane lantern
Needle for the 740 stove generator.
Valve body for irons. The upright piece is 1 1/4 inches long. Takes a generator that would be held on with a 605 gen nut. Fits models 4, 4A, 8, 8A and the 609A.
Valve body for irons. The upright piece is 1 inch long. Takes a generator that would be held on with a 605 gen nut. The upright piece has a screen in the end of it. Fits models 4, 4A, 8, 8A and the 609A.
Valve body for irons. The upright piece is 1 inch long. Takes a generator that would be held on with a 605 gen nut. Fits models 4, 4A, 8, 8A and the 609A.
Valve body for irons. The upright piece is 1 inch long. Takes a generator that would be held on with an R55 style gen nut. Fits models 4, 4A, 8, 8A and the 609A.
Valve body for irons. The upright piece is 1 inch long. Takes a generator that would be held on with an R55 style gen nut. Fits models 4, 4A, 8, 8A and the 609A.
Generator coil. Measures 7 1/4 inches long and the width is 7/32". Made of steel.
Steel NOS Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
Fits the model 5122 propane lantern.
Fits the model 5419A propane lantern
Fits model 5417 propane lantern. Each package may look different.
Gas tip for the 339 generator. These are for the newer generators, not the old original ones. Overall length is 7/16", thread width is 5/32" and head width is 13/64". If yours is much smaller, it will not fit. Below is a photo of an old type on the right, and the new one we have in stock on the left.
Generator Coil For generator 940-262. Measures 9 1/8 inches long and has a diameter of about 1/4 inch.
Generator nut for the model 615 iron and the 5121 lantern.
Used needle assembly for the 220E5891 generator. Will show signs of discoloration from being used, but will have a good needle. Used in all 220 and 228 model lanterns except for the slant valve models. Also used in lamps 118B, 132A, 133, & 143. Sears models 476.72213, 476.72212, & 476.74070.
Used generator spring for 200, 220, 228, 242, and 275 lanterns. Also fits some Sears models. This is the newer style.
Will show signs of use but will be in good shape.
Used generator spring for 200, 200A, 220, 228, 242, 243, 202 & Similar Sears Lanterns. This is the older style.
Fits Coleman stoves model 393, 396, 396LC, 396A, 396A-LC, and 397
Generator for Powermax Quick Pack lantern
Reproduction generator needle for the model 236 lantern.
Replacement needle for the 339 generator.
Generator for the 5101 and 5101A lantern. Brass, not nickel plated.
Reproduction generator nut for all the model 200, 242, 243, 220, and 228 models.
Reproduction 502 needle assembly
Generator nut for the model 214, 222, 229, 286, 288 290, 635 and 639 lanterns.
Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
Reproduction tip cleaning tool for cleaning the gas tips on your Q99 or Q77 generator.
New old stock burner bowl for the M1950 stove. Shows some tarnish from sitting around for years.
These will not fit the 530 stove without using a 1950 generator and a 530 needle.
Used Generator seat for the military lantern.
New generator needle. This is a reproduction part. This fits the 321, 331, 335 and the 339 models.
Reproduction generator nut for the 500 and 500A stove.
Generator for the 9950 Powermax propane lantern.
Generator nut for Thermos lanterns.
