252 Pump Washer - S13
These came out of the old SMP factory. This is the washer that goes behind the pump nut on an SMP military lantern.
These came out of the old SMP factory. This is the washer that goes behind the pump nut on an SMP military lantern.
Direction disk for the military lanterns. These came out of the old SMP factory.
Empty parts tube for the M1941, M1942, 520 and 523 military stoves. Tube is 4" end to end with caps on.
Filler plug gasket for the model CQ lamps,327 Quicklite lanterns and many older stoves. Can be used in place of the 104-136 lead gasket. Also fits the 523 military stove.
Chain for military lanterns and stoves. Read note below please. These are 8" long and has 15 total links, which is long enough to use on one funnel and one cap on a military lantern and have an inch left over.
NOTE: These links are slightly too big to fit in the original slots on funnels or cap clips. The first & last links will have to be modified slightly to fit. The circular part of the chain link can be bent smaller then flattened out to original the original size to fit in the cap clip - grinding them down would probably make it too weak. It will not fit into the military funnel slot - the slot would have to be enlarged in width about 1/16 of an inch to fit. No other sizes of chain are currently available that are an exact match to what was used.
These came out of the old SMP factory. New pump rod for the military lantern. Would also work on a 220/228B or C. Also would work on the stoves that took a longer pump such as the model 415.
Steel NOS Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
Military wrench for the model 520 stove. Stamped US. These have some corrosion on them that you can see in the picture.
Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
Decal for the Aladdin made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
Decal for the Preway made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
Decal for the Coleman made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1966, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1972, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a Silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style vinyl decals. Design taken from a M1950 stove built in 1974, but may fit other years. Just peel and stick.
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
This is a complete rebuild kit for the pump on an M1942 stove. You will get the cap gasket, check valve dot, and pump leather.
Wrench for the military model 520 stove. New old stock. These are not stamped US and they do not have the little clip on the opposite side.
Reproduction generator nut for the 252 military lantern. Made of brass.
Original NOS generator nut for the Milspec lantern. Military part number 6260-00-161-1859
Replacement decals for All Military Lanterns ~ Set of Three Decals
New Old Stock - Parts well cap for the military lantern. Has a new rubber gasket.
Used long air stem that fits the larger check valve used on the 220/228B and 220/228C lanterns. Also fits military lanterns. Measures 5 9/16 inches long.
Original wrench for the military lanterns. This is the wrench only and does not have the secondary tip cleaner part.
NOS Military Lantern globe channel. Crimps on burner frame to hold quadrant globe panes.
Generator tip cleaning tool for the military lantern - This tool is missing the pricker rod on one side of the tool.
NOS check valve for the 345 Kerosene stove, 348 Alcohol stove, the 5B radiant heater and some large kitchen range type appliances. This is larger than all the other Coleman check valves that are commonly used in lanterns and military applications. Width from side to side on top of the threads is 5/8".
Original reproduction wrench for the model 536 or M1950 stove.
Parts tube for 520 and 523 military stoves. Contains a new vaporizer, gas tip, large packing, and 3 screens. The outer tube has a minor rust spot or two. The parts inside are fine. LINK for great info on these and what they fit.
Original one piece decals for the later SMP military lanterns. These are not reproductions. They came from the old stock of the factory when it closed.
Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.
Large Military generator. New generator includes new gas tip, spring, and tip cleaning wire. Does not fit the 520, 523 or 530. Much bigger.
NOS long air stem that fits the larger check valve used on the 220/228B and 220/228C lanterns. Also fits military lanterns. Measures 5 9/16 inches long.
This is a new old stock generator.
Fits Military model 252 lantern. Also other non Coleman military lanterns