Used generator body only. This is only the brass tube of the generator and the gas tip. May or may not have the internal spring and packing tube. No needle is with this.
This is a new, Coleman made generator for Model 214 and 214A Coleman Lanterns. Each includes new gas tip, spring, and tip cleaning wire.
These are also known as part number 3000005092.
This is a new, Coleman made generator for Model 214 and 214A Coleman Lanterns. Each includes new gas tip, spring, and tip cleaning wire.
These are also known as part number 3000005092.
New Reproduction Generator Needle for Model 222, 222A, 222B, 226 and the 229.
New Generator for Model 226A700 and the 226-700. New generator includes new gas tip, spring, and tip cleaning wire.
Also known as part number 3000005088.
This also fits 222 models, but please read on.
Coleman discontinued the 222 generator, and they recommend this as the replacement now. In practical use, people have found that it will work and work well, but the heat shield will need fabrication or if using this on a 222, you should install a different heat shield set up out of a 226/229 lantern. The heat shields are not a part that can be ordered as they have been discontinued. This generator is wider/fatter than the original 222 generator and essentially conflicts with the heat shield. The part number for the heat shield is 5414-4605.
Reproduction generator needle for the model 236 lantern.
New Needle for the 237 generator. This is a reproduction part.
New Reproduction Generator for Model 237 Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.
Generator needle for the model 238B lantern.
Reproduction Generator for the Model 249 Lantern. Generator includes gas tip, spring, and tip cleaning wire. Made in the USA.
New generator needle. This is a reproduction part. This fits the 321, 331, 335 and the 339 models.
Used burner assembly for the old model 327,427, also for CQ and Air O Lite lanterns. Will also work on other lamps that would have originally taken the Q99 generator.
Rebuild kit for the 500 & 500A stove. Kit includes a new reproduction generator, valve stem packing, leather pump cup, and a new fuel cap gasket (stove came with one of two types - each is included).
If you need other parts for your stove, click HERE.
Reproduction generator needle for the model 500 and for the 345 kerosene marine stove.
Reproduction generator nut for the 500 and 500A stove.
Reproduction 502 needle assembly
Rebuild kit for the model 520 military stove. Includes a NOS generator (also called a vaporizer), pump cup, valve stem packing, and fuel cap gasket (stove came with one of two types - each is included). If you need other parts for your stove, click HERE.
Generator holder for the early 520 military stove.
Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.
New reproduction generator (also called a vaporizer). Includes new gas tip, screen, and tip cleaning wire. Fits the model 530 pocket stove.
Rebuild kit for the 530 Pocket Stove. Includes a new reproduction generator (also called a vaporizer), valve stem packing, new leather pump cup, and a fuel cap gasket.
If you need other parts for the 530 stove, click HERE.
Compatible with 635 and the 621 series lanterns. This is a reproduction part.
Generator Needle For Northstar Lantern 2000-750T 2000-750 2000-750E 2000A750. This is a reproduction part.
I believe these generators are for an AGM iron. They measure 4 inches long.
Generator for an AGM lantern. Measures 3 9/16 inches long.
Generator for some model of AGM lantern. Measures only 1 9/16 inches long.
Generator for some model of AGM lantern. Measures only 1 9/16 inches long. Missing the tip cleaning needle.
Generator for AGM lanterns. Measures 3 1/8 inches long. Fits the AGM model 3025 lantern. Thanks to Joe P. for this information.
Generator for American Ready lite lanterns. They are 4 5/8 inches long.
This is a reproduction generator nut for the first Coleman lantern, the Arc lantern.
Used Vent for Ash Flash lantern model 1010
From Terry Marsh's site: This wrench came with a Coleman L220 lantern dated Aug. 1928. The instructions with the lantern identify this wrench as part no. 362-950. It is 4″ long and fits nut sizes 11/16, 7/16, & 2, 5/16″ plus a 5/32″ slotted generator tip remover. This wrench also came with iron Models 4A & 609.  Link is HERE.
Needle for the 740 stove generator.
Unknown Coleman valve and generator. I can't figure out what this fits or a part number for it. Measures 11 1/2 inches long.
Compatible with 635 and the 621 series lanterns. New generator includes new gas tip, spring, and tip cleaning wire. Coleman Canadian lantern generator G6 (635A297).
Here is a kit of the most commonly used parts when repairing most lanterns and stoves. Buying kits saves in overall cost and comes with free shipping anywhere in the USA.
Used gas tip for the Q99 generator and some Quick-Lite Lanterns and Lamps. Very tarnished
Gas tip for the 339 generator. These are for the newer generators, not the old original ones. Overall length is 7/16", thread width is 5/32" and head width is 13/64". If yours is much smaller, it will not fit. Below is a photo of an old type on the right, and the new one we have in stock on the left.
Gas tip wrench. These tiny wrenches were used to remove the gas tips on Coleman lantern generators. They have some rust on them.
This is a new Coleman made generator for Model 290, 290A and 295 Lantern. Each includes new gas tip, spring, and cleaning needle.
This generator can be used on the 290 series lanterns, but you will have to use your original generator nut instead of the new one that comes with this generator. The 290 generators have been discontinued.
These are also known as part number 3000005404 and replaces the 290 & 290A part number of 290-5891.
Generator for the Denali model 9790 stove.
Fits Coleman stoves model 393, 396, 396LC, 396A, 396A-LC, and 397
This is a new reproduction 236 generator. New generator includes new gas tip, spring, and tip cleaning wire.
New Generator for Model 237 Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.
This is a reproduction generator for the very rare 238B lantern. These generators have been impossible to find for many years. Now you can get that rare 238B of yours running again. They were not cheap to get made but the workmanship is excellent. New generator includes new gas tip, spring, and tip cleaning wire.
