- Free Shipping
252 Direction Disk - S10
Direction disk for the military lanterns. These came out of the old SMP factory.
Direction disk for the military lanterns. These came out of the old SMP factory.
New Old Stock - Parts well cap for the military lantern. Has a new rubber gasket.
These came out of the old SMP factory. New pump rod for the military lantern. Would also work on a 220/228B or C. Also would work on the stoves that took a longer pump such as the model 415.
These came out of the old SMP factory. This is the washer that goes behind the pump nut on an SMP military lantern.
Rebuild kit for the model 520 military stove. Includes a NOS generator (also called a vaporizer), pump cup, valve stem packing, and fuel cap gasket (stove came with one of two types - each is included). If you need other parts for your stove, click HERE.
Parts tube for 520 and 523 military stoves. Contains a new vaporizer, gas tip, large packing, and 3 screens. The outer tube has a minor rust spot or two. The parts inside are fine. LINK for great info on these and what they fit.
Wrench for the military model 520 stove. New old stock. These are not stamped US and they do not have the little clip on the opposite side.
Military wrench for the model 520 stove. Stamped US. These have some corrosion on them that you can see in the picture.
Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.
Used long air stem that fits the larger check valve used on the 220/228B and 220/228C lanterns. Also fits military lanterns. Measures 5 9/16 inches long.
NOS long air stem that fits the larger check valve used on the 220/228B and 220/228C lanterns. Also fits military lanterns. Measures 5 9/16 inches long.
Filler plug gasket for the model CQ lamps,327 Quicklite lanterns and many older stoves. Can be used in place of the 104-136 lead gasket. Also fits the 523 military stove.
Reproduction check valve for the military lanterns. Will also fit the models 220/228B and 220/228C. Will not fit the later style lanterns.
NOS check valve for the 345 Kerosene stove, 348 Alcohol stove, the 5B radiant heater and some large kitchen range type appliances. This is larger than all the other Coleman check valves that are commonly used in lanterns and military applications. Width from side to side on top of the threads is 5/8".
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1966, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1972, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a Silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
These are original style vinyl decals. Design taken from a M1950 stove built in 1974, but may fit other years. Just peel and stick.
This is a new old stock generator.
Fits Military model 252 lantern. Also other non Coleman military lanterns
Original NOS generator nut for the Milspec lantern. Military part number 6260-00-161-1859
Reproduction generator nut for the 252 military lantern. Made of brass.
Decal for the Aladdin made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
Decal for the Coleman made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
Decal for the Preway made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
This is a complete rebuild kit for the pump on an M1942 stove. You will get the cap gasket, check valve dot, and pump leather.
Original reproduction wrench for the model 536 or M1950 stove.
This is a new old stock pre-heater valve for the M2 military stove. Does not have the valve stem or wheel (knob).
Chain for military lanterns and stoves. Read note below please. These are 8" long and has 15 total links, which is long enough to use on one funnel and one cap on a military lantern and have an inch left over.
NOTE: These links are slightly too big to fit in the original slots on funnels or cap clips. The first & last links will have to be modified slightly to fit. The circular part of the chain link can be bent smaller then flattened out to original the original size to fit in the cap clip - grinding them down would probably make it too weak. It will not fit into the military funnel slot - the slot would have to be enlarged in width about 1/16 of an inch to fit. No other sizes of chain are currently available that are an exact match to what was used.
Replacement decals for All Military Lanterns ~ Set of Three Decals
Generator tip cleaning tool for the military lantern - This tool is missing the pricker rod on one side of the tool.
Original wrench for the military lanterns. This is the wrench only and does not have the secondary tip cleaner part.