These are from used generators - they are straight with no gas tip or pricker rod inside. They will most likely need to be cleaned to be used. The interior may be clear, or it may have remnants of old internal packing/springs.
Don't know what this one fits. It could be for a lantern or small stove. The gen body is 4 3/16 inches long. The tip cleaner rod extends out another 5/8.
Generator for the 2 mantle Unimet GL4 lantern. Measures 3 1/4 inch long. Has no internal needle.
Generator for the 2 mantle Unimet GL4 lantern. Measures 3 1/4 inch long.
Tip extender assembly for propane Northstar lantern.
Thermos generator for models 8315 and 8316. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.
This is a N.O.S Coleman made generator. Each includes new gas tip, spring, and tip cleaning wire. This will fit models: 425, 425B, 425C, 425D, 425E, 425F, Sears 476.72301, 476.72244 & 476.74960.
Also known as part number 3000005108.
Some come in original packaging and some do not.
Reproduction Generator for Model 226A700 and the 226-700. Generator includes new gas tip, spring, and tip cleaning wire.
This also fits 222 models, but please read on.
Coleman discontinued the 222 generator, and they recommend the 226 generator as the replacement now. In practical use, people have found that it will work and work well, but the heat shield will need fabrication or if using this on a 222, you should install a different heat shield set up out of a 226/229 lantern. The heat shields are not a part that can be ordered as they have been discontinued. This generator is wider/fatter than the original 222 generator and essentially conflicts with the heat shield. The part number for the heat shield is 5414-4605.
Reproduction Q99 generator for the old Quicklite style lanterns and lamps. They work great.
Generator for the 5101 and 5101A lantern. Brass, not nickel plated.
Pre-heater generator for the 324-583 and 322-383 burner.
New old stock generator for the Aladdin PL1 lantern.
NOS gas tip for Model A Lamps and possibly other early Torch-Lite Lamps.
NOS maintenance kit for the 639 and 635B Lantern. Comes with a new generator, neoprene pump cup and push on nut.
Reproduction generator for the model 27 hollow wire fixture. Measures 7 3/8 inches long.
Reproduction Gloria generator that used the tapered threads on the end. Generator measures 4 1/2 inches long.
This is a new Coleman made generator for lantern models 282 and 285. Includes a new gas tip, spring, and tip cleaning wire.
Also known as part number 3000005622.
Reproduction generator for the Sunshine Safety lanterns and lamps. Similar to the Coleman Q99 but has a different nut. Will not work on Coleman lanterns and lamps.
Used generator for the model 413E and 443 stoves according to early part diagrams.
I believe it is the same generator as part number 413A5621.
This is the earlier style with the square soldered on nut which does make it easier to install. Comes with tip needle, coil and housing. This one is in good shape.
These are limited Coleman made beautiful chrome plated generators.
Fits model 426E, 413H, 432, 433 stoves. New generator includes new gas tip, spring, and tip cleaning wire. Same as part number 426-562C.
Also known as part number 3000005105.
New reproduction generator for the model 502 stove. New generator includes spring and tip cleaning wire.
Fits model 424 stove. New Old Stock generator includes new gas tip, spring, and tip cleaning wire.
Generator for the models 388 and 389 ranges.
Fits model 426E, 413H, 432, 433 stoves. NOS generator includes new gas tip, spring, and tip cleaning wire. Same as part number 426-562C.
Comes in original packaging.
Fits model 426E, 413H, 432, 433 stoves. NOS generator includes new gas tip, spring, and tip cleaning wire. Same as part number 426-562C.
Comes in original packaging but is in rough shape.
Propane stove generator for the model 3025 backpack stove.
Used generator spring for 200, 220, 228, 242, and 275 lanterns. Also fits some Sears models. This is the newer style.
Will show signs of use but will be in good shape.
Fits lantern models 321B, 331, 335 and 621B.
Reproduction generator for 220, 228, 275, and similar Sears lanterns. New generator includes new gas tip, spring, and tip cleaning wire.
For Coleman Double-Mantle Kerosene Lanterns like the 231 and 235. This may fit and work on a 206 also. Another name for this is the T44. It is the kerosene version of the 220E generator.
Thermos generator for models 8311 and 8312. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.
Generator for Geniol lanterns. Measures 4 5/8 inches long.
Generator for the 9950 Powermax propane lantern.
Generator for the Canadian 5104 and 5121 Canadian LP lanterns. Some of these come in the pink box, some do not. All are new old stock.
Generator for the Canadian model 519 heater. New generator includes new gas tip, spring, and tip cleaning wire. Also known as 519-2991.
Generator for the Canadian model 5B three burner stove.
This is a reproduction generator for the first Coleman lantern, the Arc lantern. Also fits the model 319.
Reproduction generator for the AGM model LRL21, LRL21A, LRL22, KL2, and JC Higgins model 710.7400, 710.74001 lanterns. Part number on JC Higgins parts diagram is 7110 - Generator Assembly
Reproduction generator for the model 500 and 500A stove. New generator includes new gas tip, spring, and tip cleaning needle.
This is a reproduction generator for the very rare 238B lantern. These generators have been impossible to find for many years. Now you can get that rare 238B of yours running again. They were not cheap to get made but the workmanship is excellent. New generator includes new gas tip, spring, and tip cleaning wire.
Generator for the Denali model 9790 stove.
This is a new Coleman made generator for Model 290, 290A and 295 Lantern. Each includes new gas tip, spring, and cleaning needle.
This generator can be used on the 290 series lanterns, but you will have to use your original generator nut instead of the new one that comes with this generator. The 290 generators have been discontinued.
These are also known as part number 3000005404 and replaces the 290 & 290A part number of 290-5891.
Used Vent for Ash Flash lantern model 1010
Generator for American Ready lite lanterns. They are 4 5/8 inches long.
Generator for AGM lanterns. Measures 3 1/8 inches long. Fits the AGM model 3025 lantern. Thanks to Joe P. for this information.
Generator for some model of AGM lantern. Measures only 1 9/16 inches long. Missing the tip cleaning needle.
Generator for some model of AGM lantern. Measures only 1 9/16 inches long.
Generator for an AGM lantern. Measures 3 9/16 inches long.
Rebuild kit for the 530 Pocket Stove. Includes a new reproduction generator (also called a vaporizer), valve stem packing, new leather pump cup, and a fuel cap gasket.
If you need other parts for the 530 stove, click HERE.
