Search
Vaporizer Screen - S159
Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
Vaporizer - E1142
Large Military generator. New generator includes new gas tip, spring, and tip cleaning wire. Does not fit the 520, 523 or 530. Much bigger.
Steel Vaporizer Screen - E1218
Steel NOS Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
SMP Milspec Decal One Piece - D167
Original one piece decals for the later SMP military lanterns. These are not reproductions. They came from the old stock of the factory when it closed.
Quadrant Glass Channel NOS - E1628
NOS Military Lantern globe channel. Crimps on burner frame to hold quadrant globe panes.
- 73% less
Parts Tube - E1418
Empty parts tube for the M1941, M1942, 520 and 523 military stoves. Tube is 4" end to end with caps on.
Milspec Wrench - E1243
Original wrench for the military lanterns. This is the wrench only and does not have the secondary tip cleaner part.
Milspec Tip Cleaning Tool, One sided - E1196
Generator tip cleaning tool for the military lantern - This tool is missing the pricker rod on one side of the tool.
- Free Shipping
Military specification Lantern Decals Set of 3 - D140
Replacement decals for All Military Lanterns ~ Set of Three Decals
Military Funnel Chain - E1643
Chain for military lanterns and stoves. Read note below please. These are 8" long and has 15 total links, which is long enough to use on one funnel and one cap on a military lantern and have an inch left over.
NOTE: These links are slightly too big to fit in the original slots on funnels or cap clips. The first & last links will have to be modified slightly to fit. The circular part of the chain link can be bent smaller then flattened out to original the original size to fit in the cap clip - grinding them down would probably make it too weak. It will not fit into the military funnel slot - the slot would have to be enlarged in width about 1/16 of an inch to fit. No other sizes of chain are currently available that are an exact match to what was used.
M2 Valve No Stem/Knob - E1003
This is a new old stock pre-heater valve for the M2 military stove. Does not have the valve stem or wheel (knob).
M1950 Military Wrench Reproduction - R554
Original reproduction wrench for the model 536 or M1950 stove.
- Free Shipping
M1942 Pump Rebuild Kit - K06
This is a complete rebuild kit for the pump on an M1942 stove. You will get the cap gasket, check valve dot, and pump leather.
- Free Shipping
M1942 Preway Decal - D75
Decal for the Preway made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
- Free Shipping
M1942 Coleman Decal - D77
Decal for the Coleman made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
- Free Shipping
M1942 Aladdin Decal - D74
Decal for the Aladdin made M1942 MOD military stove. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
- New!
Generator Nut, Milspec/252 - S122
Reproduction generator nut for the 252 military lantern. Made of brass.
Generator Nut - E1262
Original NOS generator nut for the Milspec lantern. Military part number 6260-00-161-1859
Generator Complete - E1274
This is a new old stock generator.
Fits Military model 252 lantern. Also other non Coleman military lanterns
- Free Shipping
Decal M1950, Wyot Made in 1974 - D109
These are original style vinyl decals. Design taken from a M1950 stove built in 1974, but may fit other years. Just peel and stick.
- Free Shipping
Decal M1950, SMP Warning 1987 - D112
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
- Free Shipping
Decal M1950, SMP 1987 - D111
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
- Free Shipping
Decal M1950, Rogers Made in 1963 Silver - D107
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a Silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1963 Gold - D106
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1951-52 Silver - D105
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1951-52 Silver - D104
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1972 - D101
These are original style waterslide decals. Design taken from a M1950 stove built in 1972, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1966 - D100
These are original style waterslide decals. Design taken from a M1950 stove built in 1966, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1951 Silver - D102
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1951 Gold - D103
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Check Valve, Large - E1626
NOS check valve for the 345 Kerosene stove, 348 Alcohol stove, the 5B radiant heater and some large kitchen range type appliances. This is larger than all the other Coleman check valves that are commonly used in lanterns and military applications. Width from side to side on top of the threads is 5/8".
Check Valve Milspec - R421
Reproduction check valve for the military lanterns. Will also fit the models 220/228B and 220/228C. Will not fit the later style lanterns.
- Free Shipping
CQ/327 Cap Gasket - S52
Filler plug gasket for the model CQ lamps,327 Quicklite lanterns and many older stoves. Can be used in place of the 104-136 lead gasket. Also fits the 523 military stove.
Air Stem, Old Style, Long, Reproduction - R582
NOS long air stem that fits the larger check valve used on the 220/228B and 220/228C lanterns. Also fits military lanterns. Measures 5 9/16 inches long.
Air Stem Old Style Long Used - E1613
Used long air stem that fits the larger check valve used on the 220/228B and 220/228C lanterns. Also fits military lanterns. Measures 5 9/16 inches long.
- Free Shipping
520/M1941 Parts Tube - E1244
Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.
520 Wrench Stamped US - E1241
Military wrench for the model 520 stove. Stamped US. These have some corrosion on them that you can see in the picture.
520 Wrench - E1020
Wrench for the military model 520 stove. New old stock. These are not stamped US and they do not have the little clip on the opposite side.
520 Part Tube Semi-Rusty - E1242
Parts tube for 520 and 523 military stoves. Contains a new vaporizer, gas tip, large packing, and 3 screens. The outer tube has a minor rust spot or two. The parts inside are fine. LINK for great info on these and what they fit.