Generators

This is a new, Coleman made generator for Model 214 and 214A Coleman Lanterns. Each includes new gas tip, spring, and tip cleaning wire.
These are also known as part number 3000005092.

This is a new, Coleman made generator for Model 214 and 214A Coleman Lanterns. Each includes new gas tip, spring, and tip cleaning wire.
These are also known as part number 3000005092.

New Reproduction Generator for Model 222, 222A, 222B and the 229. Generator includes new gas tip, spring, and tip cleaning wire.

New Generator for Model 226A700 and the 226-700. New generator includes new gas tip, spring, and tip cleaning wire.

Also known as part number 3000005088.

This also fits 222 models, but please read on. 

Coleman discontinued the 222 generator, and they recommend this as the replacement now. In practical use, people have found that it will work and work well, but the heat shield will need fabrication or if using  this on a 222, you should install a different heat shield set up out of a 226/229 lantern. The heat shields are not a part that can be ordered as they have been discontinued. This generator is wider/fatter than the original 222 generator and essentially conflicts with the heat shield. The part number for the heat shield is 5414-4605. 

New  Needle for the 237 generator. This is a reproduction part.

New Reproduction Generator for Model 237 Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.

Reproduction Generator for the Model 249 Lantern. Generator includes gas tip, spring, and tip cleaning wire. Made in the USA.

New generator needle. This is a reproduction part. This fits the 321, 331, 335 and the 339 models.

Reproduction 502 needle assembly

Compatible with 635 and the 621 series lanterns. This is a reproduction part.

Generator Needle For Northstar Lantern 2000-750T 2000-750 2000-750E 2000A750. This is a reproduction part.

Generator for an AGM lantern. Measures 3 9/16 inches long.

Generator for some model of AGM lantern. Measures only 1 9/16 inches long.

Generator for AGM lanterns. Measures 3 1/8 inches long. Fits the AGM model 3025 lantern. Thanks to Joe P. for this information.

Generator for American Ready lite lanterns. They are 4 5/8 inches long.

Used Vent for Ash Flash lantern model 1010

Compatible with 635 and the 621 series lanterns. New generator includes new gas tip, spring, and tip cleaning wire. Coleman Canadian lantern generator G6 (635A297).

This is a new Coleman made generator for Model 290, 290A and 295 Lantern. Each includes new gas tip, spring, and cleaning needle.
This generator can be used on the 290 series lanterns, but you will have to use your original generator nut instead of the new one that comes with this generator. The 290 generators have been discontinued.  
These are also known as part number 3000005404 and replaces the 290 & 290A part number of 290-5891.

Generator for the Denali model 9790 stove.

Generator.

Fits Coleman stoves model 393, 396, 396LC, 396A, 396A-LC, and 397

Fits the model 5107 propane lantern

Fits the model 5114B propane lantern

Generator for stove 390 and 390L

This is a new reproduction 236 generator. New generator includes new gas tip, spring, and tip cleaning wire.

New Generator for Model 237 Lanterns. New generator includes new gas tip, spring, and tip cleaning wire.

This is a reproduction generator for the very rare 238B lantern. These generators have been impossible to find for many years. Now you can get that rare 238B of yours running again. They were not cheap to get made but the workmanship is excellent. New generator includes new gas tip, spring, and tip cleaning wire.

Fits lantern model 325, not 325A. New generator includes new gas tip, spring, and tip cleaning wire. New old stock - some come in different packaging that what is shown.

New generator includes new gas tip, spring, and tip cleaning wire.

This fits the 321, 331 and the 335 models.

Fits model 339 lantern. New generator includes new gas tip, spring, and tip cleaning wire.

Reproduction generator for the model 500 and 500A stove. New generator includes new gas tip, spring, and tip cleaning needle.

Generator for the 639 Lantern. New generator includes new gas tip, spring, and tip cleaning wire.

Also known as part number 3000005095.

Reproduction generator for the AGM model LRL21, LRL21A, LRL22, KL2, and JC Higgins model 710.7400, 710.74001 lanterns. Part number on JC Higgins parts diagram is 7110 - Generator Assembly

This is a reproduction generator for the first Coleman lantern, the Arc lantern. Also fits the model 319.

Generator for stove. New generator includes new gas tip, spring, and tip cleaning wire. May show signs of rust from age.

Generator for the Canadian model 5B three burner stove.

This is a new old stock generator.

Fits Military model 252 lantern. Also other non Coleman military lanterns

Generator for the Canadian model 519 heater. New generator includes new gas tip, spring, and tip cleaning wire. Also known as 519-2991.

Fits the model 5122 propane lantern.

New Generator for Model 226A700 and the 226-700. New generator includes new gas tip, spring, and tip cleaning wire.

Also known as part number 3000005088.

This also fits 222 models, but please read on. 

Coleman discontinued the 222 generator, and they recommend this as the replacement now. In practical use, people have found that it will work and work well, but the heat shield will need fabrication or if using  this on a 222, you should install a different heat shield set up out of a 226/229 lantern. The heat shields are not a part that can be ordered as they have been discontinued. This generator is wider/fatter than the original 222 generator and essentially conflicts with the heat shield. The part number for the heat shield is 5414-4605. 

Fits the model 5114 and 5114A propane lanterns

Generator for the Canadian 5104 and 5121 Canadian LP lanterns. Some of these come in the pink box, some do not. All are new old stock.

Generator for the 9950 Powermax propane lantern.

Generator for Geniol lanterns. Measures 4 5/8 inches long.

Thermos generator for models 8311 and 8312. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.

Thermos generator for models 8325 and 8326. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.

Thermos generator for inverted lantern models 8319 and 8321. Also fits Kamplite and JC Higgins inverted lanterns. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, BUT DOES NOT HAVE a tip cleaning wire.

For Coleman Double-Mantle Kerosene Lanterns like the 231 and 235. This may fit and work on a 206 also. Another name for this is the T44.  It is the kerosene version of the 220E generator.

Reproduction generator for 220, 228, 275, and similar Sears lanterns. New generator includes new gas tip, spring, and tip cleaning wire.

Fits the model 5419A propane lantern