Other Brands
427 Pump Cup - S82
Smaller diameter leather pump cup for the model 427 lantern. Measures roughly 3/4" at it's widest point.
A fellow collector has shared with us that it will also fit the Akron 107 with a built on pump.
- Free Shipping
Thermos Pump O Ring Set - S18
O rings for the Thermos lantern and stove pumps. One is for the pump, the other is for the top seal. These are for the later model Thermos lanterns and stoves where the pump and filler cap where combined.
- Free Shipping
Bail Wrap Protector Black - R513
This is 12 inches of new black plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.
- Free Shipping
Cap Gasket HGP - S50
This is a large filler cap gasket for the Handy Gas Plants. It also works for the Tilley R1 heater.
- Free Shipping
Akron Cap Gasket - S55
Cap gasket for Akron lanterns. Outside diameter is 5/8 of an inch. Inside diameter is 3/8 of an inch. Thickness is 1/8 inch.
Tip Cleaner Stem Reproduction - R700
This is a reproduction tip cleaner stem for the model 220/228B through 220/228F lantern. Looks a little different that the original but is a great lower cost alternative to the original ones.
This also fits the AGM 2572 & Kamplite RL-3
- Free Shipping
- Free Shipping
- Free Shipping
Thermos Decal - D39
Decal for the Thermos lantern. It is approximately 2 1/2 inches long and is 1 1/4 inches high at the widest point. The background silver is too sparkly on these. Reduced price to sell.
Bail Wrap Protector Clear - R512
This is 12 inches of new clear plastic bail wrap to protect the fount of any lantern. The size of these are small enough where it stays put after installation and will not slide around easily. 12" is enough to use on two to three lantern bails.
Generator AGM Kamplite LRL21 - R400
Reproduction generator for the AGM model LRL21, LRL21A, LRL22, KL2, and JC Higgins model 710.7400, 710.74001 lanterns. Part number on JC Higgins parts diagram is 7110 - Generator Assembly
- Free Shipping
- Free Shipping
- Free Shipping
Generator Sunshine Safety Q99 - R404
Reproduction generator for the Sunshine Safety lanterns and lamps. Similar to the Coleman Q99 but has a different nut. Will not work on Coleman lanterns and lamps.
- New!
Permatex Indian Head Shellac - R507
This is a gasket sealer that many use for sealing valves to tanks. Is flexible when dry and offers good fuel resistance.
- New!
Generator Lantern - E1398
Thermos generator for models 8311 and 8312. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.
- Free Shipping
- Free Shipping
AGM 3016 Decal - D80
Decal for the AGM model 3016 Lantern. This decal is the waterslide type - not peel and stick.
Click on the "Description" under the photo to see the installation instructions.
- New!
Thermos Lantern Generator - E1618
Thermos generator for models 8315 and 8316. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.
- New!
Generator Lantern - E1558
Thermos generator for models 8325 and 8326. May show signs of tarnish but is new old stock. New generator includes new gas tip, spring, and tip cleaning wire.
- New!
AGM S-965 Generator - E1220
Generator for AGM lanterns. Measures 3 1/8 inches long. Fits the AGM model 3025 lantern. Thanks to Joe P. for this information.
- New!
Generator Stove - E1417
Thermos stove generator for models 8422, 8425, 8426, 8427, 8428, 8429, and 8432. New generator includes new gas tip, spring, and tip cleaning wire.
Sears Direction Disc, Reproduction - S12
Reproduction control knob disc for red Sears lanterns models.
- New!
Unknown Screen #1 - E1058
Unknown screen. Measures 1/2 inch in diameter. Very fine brass. Seems too fine to be for a burner screen. Came out of a lot of old AGM parts.
Filler Cap 3 Piece AGM Used - E1634
Used AGM Cap. Has a steel screw and new filler cap gasket. This filler cap has the AGM hole in top. Shows signs of wear. Could be any combination of the following; wrench marks, oxidization, or fading.
AGM Stove Porcelain White Knob Used - E1362
This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.
- New!
Globe Century 8939 - G31
This horizontally striped frosted globe is approximately 3 7/8 inches tall and has a 4 3/8 inch diameter.
Generator Stove - E1507
Thermos generator for models 8489, 8490, 8491 stoves. New generator includes new gas tip, spring, and tip cleaning wire.
- New!
Generator Stove - E1659
Thermos generator for stove models 8420, 8421, 8430, and 8431. New generator includes new gas tip, spring, and tip cleaning wire.
- New!
Kamplite-AGM Globe - G209
This is a used globe for an AGM lantern. Marked heat resisting. The writing is faint as was common on these. These will also fit on 200a lanterns.
AGM Iron Generator - E1287
I believe these generators are for an AGM iron. They measure 4 inches long.