Other Brands

The Canadian 990 globe was made to fit the model 331 lantern. Does not fit any other gas lantern model. Very rare globe to find these days. Will also fit the Thermos lantern models 8311 and 8312.

I believe these are burner tubes for an AGM double mantle lantern. They are 2 7/8 inches long. Roughly the same diameter as Coleman burner tubes. Made of steel.

Fuel tube and screen for Thermos stoves. It is 2 1/2 inches long.

Fuel tube and screen for Thermos stoves. It is 3 inches long.

This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.

This is a used vent.  Has chipping and a little rust as shown in photos.

This is a used globe for an AGM lantern. Marked heat resisting. The writing is faint as was common on these. These will also fit on 200a lanterns.

Generator for Akron iron.

Reproduction generator for the AGM model LRL21, LRL21A, LRL22, KL2, and JC Higgins model 710.7400, 710.74001 lanterns. Part number on JC Higgins parts diagram is 7110 - Generator Assembly

Screw set for Primus. Screws are 7/8 of an inch long.

Came in a box marked Primus parts. Looks like the outer housing for a pump. Measures 7 3/4 inches long.

Generator for AGM lanterns. Measures 3 1/8 inches long. Fits the AGM model 3025 lantern. Thanks to Joe P. for this information.

Don't know what this one fits. It could be for a lantern or small stove. The gen body is 4 3/16 inches long. The tip cleaner rod extends out another 5/8.

Drain cap for the KampKold cooler.

Fuel tube and screen for Thermos products. It is 3 7/8 inches long.

Fuel tube and screen for Thermos appliances. It is 2 5/8 inches long.

I believe these generators are for an AGM iron. They measure 4 inches long.

Used collar for a Hawthorne model 60-9521 lantern.

Used collar for a Hawthorne model 60-9536 lantern.

This is a used Western Field Thermos vent. Small imperfections and one chip, but in excellent shape.

Generator for an AGM lantern. Measures 3 9/16 inches long.

Used burner frame for the model 2572 lantern.

Unknown valve stem. Has a tag on it that says it is part number 4-4005. Measures about 3 1/2 inches long.

Unknown screen. Measures 1/2 inch in diameter. Very fine brass. Seems too fine to be for a burner screen. Came out of a lot of old AGM parts.

Don't know the part number for this valve and generator. It measures 10 1/4 inches long from tip to end of nut. 

Top cap for the Leacock lamp handle.

Generator for some model of AGM lantern. Measures only 1 9/16 inches long.

Unknown collar for a non Coleman lantern. Measures about 1 7/8 inches tall and has a diameter of 3 1/16 inches.

Slightly smaller than a Coleman pump clip.

This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.

This is a used knob. I believe this is one of the porcelain knobs for the old AGM kitchen or cabin stoves. Just a hollow star shaped knob. There are no threads on the inside and I am not sure how they were held on. Made of porcelain. Has a diameter of about 1 7/8 inches.

Used AGM Cap. Has a steel screw and new filler cap gasket. This filler cap has the AGM hole in top.  Shows signs of wear. Could be any combination of the following; wrench marks, oxidization, or fading.

Collar for the Thermos lantern.

Term-Sport Alcohol Stove Burner Cover Label. This decal is the waterslide type - not peel and stick. Click on the "Description" under the photo to see the installation instructions.

Term-Sport Alcohol Stove Burner Cover Label. This decal is the waterslide type - not peel and stick. Click on the "Description" under the photo to see the installation instructions.

Term-Sport Alcohol Stove Burner Instruction Sheet. Reproduction.

Term-Sport Alcohol Stove Tank Decal. This decal is the waterslide type - not peel and stick. Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4823 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4822 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4523-A stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4522-A stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4521-A stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4523 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4522 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4521 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model 401 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model 402 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the Preway Model P4821 stove. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.

Decal for the AGM model 3016 Lantern. This decal is the waterslide type - not peel and stick. 

Click on the "Description" under the photo to see the installation instructions.