Stoves
10-24 x 1/4 Stove Bracket Screw, Reproduction - S63
Bracket screw for the model 500 and 500A stove - Screw ONLY.
If you need just the bracket it is HERE.
220 Filler Cap Insert, Used - E1222
This is a used inner disc for the old 3 piece caps. May or may not have old gasket but one will be provided for you if needed. All will vary in amount of wear.
HERE is a new filler cap screw if needed.
4-36 x 5/16 Brass Screw - S61
This is the brass screw used in M-1950 stove valve knob. Can also for 242 pumps where the top of the pump fits inside the fount..
4-36 x 5/16 Screw Steel - S62
This is a screw for 242 pumps where the top of the pump fits inside the fount and for other applications with this thread.
- Free Shipping
500 Generator Needle, Reproduction - R217
Reproduction generator needle for the model 500 and for the 345 kerosene marine stove.
500 Stove Valve Nut - S158
Solid brass nut for the model 345, 348, 500, & 502 stoves. Possibly used in other applications also. Refer to the parts diagram of your model if unsure.
502 Grate Used - E1451
This is a used stove grate for the 502 Coleman stove. It will show signs of being used.
- Free Shipping
5114 Propane Gasket - S53
This is the gasket that goes between the propane regulator and the small propane bottles that you screw on. Not ever offered as a separate Coleman part. The total diameter is 15/16 of an inch. The inner hole diameter is right between 5/16 and 3/8 of an inch.
This fits many applications for propane appliances.
- New!
520 Part Tube Semi-Rusty - E1242
Parts tube for 520 and 523 military stoves. Contains a new vaporizer, gas tip, large packing, and 3 screens. The outer tube has a minor rust spot or two. The parts inside are fine. LINK for great info on these and what they fit.
520 Vaporizer Needle - S154
Tip cleaner needle for inside the vaporizer on a model 520 stove. NOS - will show some surface rust here and there from sitting on a shelf for many years.
520 Wrench - E1020
Wrench for the military model 520 stove. New old stock. These are not stamped US and they do not have the little clip on the opposite side.
520 Wrench Stamped US - E1241
Military wrench for the model 520 stove. Stamped US. These have some corrosion on them that you can see in the picture.
520/M1941 Parts Tube - E1244
Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.
- Free Shipping
530 Diffuser Plate - R505
This is a reproduction flame diffuser plate for the 520 and 530 stoves. These are very nice plates. Professionally cut. 4 inch diameter.
530 Diffuser Plate Stainless Steel - R501
Stainless steel diffuser plate for the model 530 stove. 4 inch diameter. Professionally cut.
530 Pump Assembly - E1678
Used pump for the model 530 stove. Will have a new pump leather and work just fine.
- New!
530 Valve Wheel, Used - E1392
Used dark red knob for the 530 stove. Same as the 200a or 220 knob just a darker burgundy color.
530 Valve Wheel, Used - E1611
Used dark red knob for the 530 stove. Same as the 200a or 220 knob just a darker burgundy color.
Looks like it may have gotten a little too hot and burned (see photos)
- Free Shipping
5423A5611 Gasket - S43
This is the gasket only from the 5423A5611 small parts kit. OD 1/2", ID 3/16", Thickness is just under 1/16" Was commonly used on the model 5413, 5413A, 5423, 5430B, 5433, 5430B, 5430C, 5435C, 5435D and similar propane stoves.
Air Stem Long New Style - E1048
Reproduction long air stem with newer style screw end. Same length as the 216-532 air stem. Allows the use of the new style check valve with the smaller threaded end for stoves that took a longer air stem. Overall length is 5.5".
Air Stem Reproduction - R416
This is a reproduction air stem for the large filler caps as used on Handy Gas Plants, Radiant Heater #2, Remote Tank 457 and 465, and other large tanks.
Auxiliary Burner Bowl and Rings - C053
Auxiliary Burner Bowl, Rings And Screw 413E/413F/413G/424/426B/426/D/426G/442/442A/443 Instant Light, 2 & 3 Burner Stoves
Block and Needle Assembly - E1109
Block and Needle Assembly. Measures approximately 4 1/4 inches long.
Burner Assembly Electronic - E1318
Burner assembly for the rare 414 gas stove with electronic ignition.