M1950
Large Valve Stem Packing - 🟡𝟭𝟬 𝗣𝗔𝗖𝗞- P01
This is a 10 PACK - Typically used to stop a fuel leak from the valve stem on older appliances.
This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.
If you need to check your model, please see the PARTS DIAGRAM PAGE.
425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.
Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201.
Made of 100% graphite.
M1950 Indicating Knob, Rogers, Deep Red - S176
This is a reproduction knob for the Rogers made M1950 stove. The color of these match the original Rogers darker color. We have found the earlier stoves (made around 1953) were darker than the newer ones (made around 1963). The last photo shows the difference in color between the two. These will fit any model or make of the M1950. These are made in the USA and have been tested to work well even with the heat these stoves produce. Part of the testing was to check its function on two different M-1950 stoves for an hour at a time by doing multiple on-off-on cycles many times. If you need a screw for this knob, those are HERE, they are a special thread pitch of 4-36 and the common Coleman screws are different.
M1950 Indicating Knob, Coleman Deep Red - S174
This is a reproduction knob for the Coleman made M1950 stove. The color of these match the original Coleman made color. These will fit any model or make of the M1950. These are made in the USA and have been tested to work well even with the heat these stoves produce. Part of the testing was to check its function on two different M-1950 stoves for an hour at a time by doing multiple on-off-on cycles many times. If you need a screw for this knob, those are HERE, they are a special thread pitch of 4-36 and the common Coleman screws are different.
520/M1941 Parts Tube - E1244
Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.
M1950 Military Wrench Reproduction - R554
Original reproduction wrench for the model 536 or M1950 stove.
M1950 Pip Cup, Used - E1143
This is a used pip holder cup for the M1950 stove pump. Comes with a new rubber pip.
Vaporizer 520 - E1464
For the model 520 stove. New generator includes new gas tip and tip cleaning wire. LINK for great info on these and what they fit.
Additional info: The 520 (aka M1941) and M1942 generators are usually interchangeable. The only exception is the early version of the M1942, known as the Mountaineer Stove. It has a vertical sprocket-type valve wheel. The generator on that stove seems to be unique in that it's a bit shorter than the later version.
Filler Cap Insert, Reproduction - S144
This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.
M1950 Pump Pip Cap, Used - E1616
This is a cap for the end of the M1950 pump. This screws into the bottom of the pump.
M1950 Pump Rebuild Kit - K05
This is a complete rebuild kit for the pump on an M1950 stove. You will get the cap gasket, check valve dot, fuel tube gasket and pump leather.
- Free Shipping
Needle Reproduction - S92
Reproduction needle for the 530 vaporizer. Will also work on the M1950 vaporizer.
M1950 Burner Bowl - E1271
New old stock burner bowl for the M1950 stove. Shows some tarnish from sitting around for years.
These will not fit the 530 stove without using a 1950 generator and a 530 needle.
- Free Shipping
Decal M1950, Coleman Made in 1966 - D100
These are original style waterslide decals. Design taken from a M1950 stove built in 1966, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1972 - D101
These are original style waterslide decals. Design taken from a M1950 stove built in 1972, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1951 Silver - D102
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Coleman Made in 1951 Gold - D103
These are original style waterslide decals. Design taken from a M1950 stove built in 1951 by Coleman with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1951-52 Silver - D104
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1951-52 Silver - D105
These are original style waterslide decals. Design taken from a M1950 stove built in 1951& 52 by Rogers, with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1963 Gold - D106
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a gold label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Rogers Made in 1963 Silver - D107
These are original style waterslide decals. Design taken from a M1950 stove built in 1963 by Rogers with a Silver label, but may fit other years.
Click on the "Description" under the photo to see the waterslide installation instructions.
- Free Shipping
Decal M1950, Wyot Made in 1974 - D109
These are original style vinyl decals. Design taken from a M1950 stove built in 1974, but may fit other years. Just peel and stick.
- Free Shipping
Decal M1950, SMP 1987 - D111
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
- Free Shipping
Decal M1950, SMP Warning 1987 - D112
These are original style vinyl decals. Design taken from a M1950 stove built in 1987 by SMP, but may fit other years. Just peel and stick.
Vaporizer Screen - S159
Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
220 Filler Cap Insert, Used - E1222
This is a used inner disc for the old 3 piece caps. May or may not have old gasket but one will be provided for you if needed. All will vary in amount of wear.
HERE is a new filler cap screw if needed.
Valve Stem Retaining Ring - 1/4" - S04
This is a new brass retainer ring used on the bottom of many Coleman valve stems. This is designed for a 1/4" valve stem diameter, but can be cut for the smaller 3/16" versions if needed. You will need to open it up, place it over the valve stem, then bend it back. This is used to hold the bushing in place in front of the valve stem packing.
Small Pump Leather - S83
Small pump Leather for the model 1950 stove. Also fits the M1942 stove. Measures roughly 3/4" at it's widest point.
427 Pump Cup - S82
Smaller diameter leather pump cup for the model 427 lantern. Measures roughly 3/4" at it's widest point.
A fellow collector has shared with us that it will also fit the Akron 107 with a built on pump.
Large Valve Stem Packing - P01
Typically used to stop a fuel leak from the valve stem on older appliances.
This is the larger valve stem packing. It is 5/16" long. The hole diameter is 1/4". It would be used on most modern lanterns, lamps, and stoves. This will only work on valve stems that are 1/4" in width.
If you need to check your model, please see the PARTS DIAGRAM PAGE.
425F stoves could use either this or the P2 packing. Make sure your stem diameter is 1/4" for this part. If it is smaller, you need the P2 HERE.
Coleman made the same product under two different part numbers. This is the same as part number 118B6201 and 118D6201.
Made of 100% graphite.
- Free Shipping
M1950 Spring - S141
This is the spring used in the non return valve located in the bottom of the pump. Reproduction part.
Steel Vaporizer Screen - E1218
Steel NOS Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.
4-36 x 5/16 Brass Screw - S61
This is the brass screw used in M-1950 stove valve knob. Can also for 242 pumps where the top of the pump fits inside the fount..
Military Funnel Chain - E1643
Chain for military lanterns and stoves. Read note below please. These are 8" long and has 15 total links, which is long enough to use on one funnel and one cap on a military lantern and have an inch left over.
NOTE: These links are slightly too big to fit in the original slots on funnels or cap clips. The first & last links will have to be modified slightly to fit. The circular part of the chain link can be bent smaller then flattened out to original the original size to fit in the cap clip - grinding them down would probably make it too weak. It will not fit into the military funnel slot - the slot would have to be enlarged in width about 1/16 of an inch to fit. No other sizes of chain are currently available that are an exact match to what was used.
- Free Shipping
252 Filler Cap Chain Bracket - R506
This is the small part that attaches to the filler cap screw so you can hook the chain to it.
Filler Cap Screw 220 Size - S68
Stainless steel filler cap screw for the 3 piece filler caps used on the 200A, 220B, 220C, 220D, 220E, 220F, 427 and similar sized filler caps.
Fits the cap number: 220C1401
- Free Shipping
- Free Shipping
Check Valve Pip - S56
New rubber pip for the re-buildable NRV type check valve used on the 242, 242A, and the M1950 stove.
- Free Shipping
Milspec Chain Ring - R500
This is the ring that attaches to the collar of the lantern so you can hook a chain to it. Rings are stainless.