476.72212

Products: 150 of 67
Show: 50
  • Pump Assembly Neoprene Used - E120
    • New!

    Pump Assembly Neoprene Used - E120

    Used pump assembly for most stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    Not rated yet
    • $10.00
  • Pump Assembly Neoprene Used - E961
    • New!

    Pump Assembly Neoprene Used - E961

    Used pump assembly for most stoves and lanterns except for the small Peak 1 type products. We have replaced the neoprene pump cup. 


    Not rated yet
    • $10.00
  • Air Stem New Style Used - E470
    • New!

    Air Stem New Style Used - E470

    Used air stem for most post-1980 stoves and lanterns. Has the smaller end on the air stem.

    Not rated yet
    • $0.25
  • Used Leather Pump Cup - E680
    • New!

    Used Leather Pump Cup - E680

    These are used leather pump cups that fit most lanterns and stoves. They may need some oil and conditioning, but are still flexible. This is the typical sized 7/8" pump cups for most lanterns and stoves.

    Not rated yet
    • $1.00
  • 220 Globe Green Sunrise Logo - G24
    • New!

    220 Globe Green Sunrise Logo - G24

    This is an original used green sunrise logo globe made between 1946 and 1959. Although used, it has been inspected for damage or defects. 

    The light green logo is very light as was common. The back has "PYREX" over "MADE IN USA"

    This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Some of the markings are very light and hard to see.

    Not rated yet
    • $35.00
  • Filler Cap Tire Valve Brass - R302
    • New!

    Filler Cap Tire Valve Brass - R302

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.20
  • Filler Cap Tire Valve Nickel - R301
    • New!

    Filler Cap Tire Valve Nickel - R301

    This filler cap is made by the Amish so you can pump up your lantern or stove with a bicycle pump. Fits most all styles of lanterns and stoves.

    Not rated yet
    • $13.90
  • Plastic Back Up Plate For Pump Assy - E876

    NOS plastic back up plates for pump assembly


    Not rated yet
    • $1.25
  • NOS Pump Assy Metal Pump Cap - E945

    NOS metal pump cap for pump assembly

    Does not come with whole assembly

    Not rated yet
    • $2.00
  • Used Square Nut - E926

    This is a used pump square nut.

    Comes with one square nut ONLY.

    Not rated yet
    • $1.75
  • Valve Wheel Red Hollow Used - E302

    Hollow style valve wheel. I believe these were used on some years of Canadian lanterns. 

    Not rated yet
    • $6.50
  • Pump Assembly, Universal - C45

    Universal pump assembly with leather cup that fits almost all Coleman lanterns and stoves. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $12.70
  • Pump Assy Leather Used Push On Nut - E263

    This is a used pump assembly. It has a new pump leather installed. This is the later style pump assembly with the push on nut to hold the leather. See part number 200A5201 for the earlier style with the square nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $11.95
  • Eccentric Block Used - S101

    Used Eccentric Block 


    Not rated yet
    • $5.00
  • Pump Assembly Leather Used Square Nut - E264

    This is a used pump assembly. It has been cleaned and has a new pump leather installed. This is the earlier style pump assembly with the square nut to hold the leather. See part number 242D5201 for the later style with the push on nut. Both pumps are identical other than that. This pump assembly will fit almost everything Coleman ever made beginning in about 1946 and many models before that. Does not fit the small Peak 1 lanterns or stoves.

    Not rated yet
    • $13.55
  • Used Pump Assembly Spring - S100
    • 3% less

    Used Pump Assembly Spring - S100

    Used Pump Assembly Spring

    Spring ONLY

    Not rated yet
    • $3.25
  • Used Generator Body - E38

    These are from used generators - they are straight with no gas tip or pricker rod inside. They will most likely need to be cleaned to be used. The interior may be clear, or it may have remnants of old internal packing/springs.

    Not rated yet
    • $4.00
  • Filler Cap 3 Piece Yellow Used - E156

    This is for one used 3 piece yellow filler cap with a newly installed gasket.

    Not rated yet
    • $13.00
  • Filler Cap 3 Piece Brown Used - E280

    This is for one used 3 piece brown filler cap with a newly installed gasket.

    Not rated yet
    • $13.00
  • Filler Cap Green Used - E258

    This is a used one piece filler cap. Paint is chipped. Has a new filler cap gasket. These are green. The shade of green and wear varies within this stock of used caps. 

    Not rated yet
    • $10.85
  • Filler Cap 3 Piece Nickel Plated Used - E349

    This is for one used 3 piece filler cap with a newly installed gasket. They are in various stages of wear. Finish is chipped or missing and could look like any of these in the photo. We start by handing out the ones in best shape first. We are showing 3 caps for demonstration purposes only to highlight the condition it could be in. This is for only one cap, not many.

    Not rated yet
    • $16.25
  • Filler Cap 3 Piece Green Used - E383

    This is for one used 3 piece filler cap with a newly installed gasket. They are in various stages of wear. Paint is chipped or missing and could look like any of these in the photo. We start by handing out the ones in best shape first. We are showing 3 caps for demonstration purposes only to highlight the condition it could be in. This is for only one cap, not many.

    Not rated yet
    • $13.00
  • Valve Wheel Black Square Hole Used - E76

    Used valve wheel for 201, early 220B's and some model 236 & 237's. In the 426 stove series, this only fits 426 or 426A It fits on valve stems with a square shaft end. It is not interchangeable with other wheels. Will vary in wear.

    Not rated yet
    • $10.85
  • 220 Filler Cap Insert - S144

    This is a reproduction inner disc for the old 3 piece caps. Comes with a new gasket and is made of brass.

    Not rated yet
    • $9.85
  • Mixing Chamber Wide Used - E882

    Mixing chamber for lamps and lanterns. It has the burner tube holes at a wider spacing than the normal mixing chambers. The burner tube holes are 1/1/2 inches apart center to center. Normal mixing chambers are spaced 1 3/8.

    Not rated yet
    • $10.85
  • Black Valve Wheel New Style USED - S78

    This is a used part and may show signs of wear or have a few chips in it. This is the new style black valve wheel for 200A's, models 220H, 220J and 220K, 228F and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. The main difference is the hollow style back. In the 426 stove series, this only fits 426 or 426A

    Not rated yet
    • $9.00
  • Valve Wheel Black Old Style Used - S79

    This is a used part and may show signs of wear. There may also be a few small chips in it. This is the old style black valve wheel for 200A, 202, 220D, 220E and 220F, and others. It is completely interchangeable with the red wheel. Newer model 200A's and model 202 took the black wheel. It is the solid back style.

    Not rated yet
    • $11.50
  • 908M Mantles - E92

    Quick Clip mantles. Same size as Coleman 21A mantles.

    Not rated yet
    • $4.35
  • Mantle String Tie #21 4 Pack - M2

    Coleman's Most Popular Sized Mantles. 4 mantles per pack

    Use on these lanterns: 200, 201, 214, 220, 228, 242, 243, 249, 275, 282, 285, 286, 288, 290, 295, 5107, 5114, 5150, 5155, 5152, 5153, 5154, 5155, 5156, 5157, 5159, 5177, 5178, 9950, 9960

    Not rated yet
    • $7.00
  • 220 Globe Pyrex Logo - G52

    Used 220 globe with the word Pyrex in green letters. This globe will fit models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Small factory defect on upper lip (see photo).


    Not rated yet
    • $45.00
  • Mixing Chamber New Style Plated - E189

    This is a newer style mixing chamber for the 220-228 series lanterns. It is plated with a zinc coating or something similar.

    Not rated yet
    • $4.35
  • Burner Tube Nickel Plated

    This is a nickel plated brass burner tube. Not polished. More of a utilitarian type finish. For most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long.

    Not rated yet
    • $7.60
  • Burner Tube Steel Old Style - E114

    Steel burner tubes for most Coleman double mantle lanterns and lamps. Measures approximately 2 7/8 inches long. These are the older style gray looking steel tubes as used on lanterns and lamps made during the war years.

    Not rated yet
    • $4.35
  • 220 Globe Used - G113

    This used globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. Has minor scratches, but is sound and should work fine.

    Not rated yet
    • $15.00
  • 220 Globe WL Mexico - G106

    Used made in Mexico white letter globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $23.85
  • 220 Globe Clear - G4

    This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. New part number 2000026613.

    Not rated yet
    • $17.90
  • Burner Tube Short - S132

    Shorter burner tube for the model 220 slant lantern. Same as the normal 101-324 burner tube only a little shorter. Measures 2 1/4 inches long. Many of the slant 220 and 228 lanterns took shorter burner tubes.

    Not rated yet
    • $7.00
  • 220 Red Logo Replacement globe USA - G22

    This is a US made replacement globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. 

    Not rated yet
    • $26.05
  • Check Valve With Stem - C1

    This is the common Coleman check valve and air stem that fits most styles of lanterns and stoves made after 1946 and some before that date. Comes with the new O ring. If your part diagram calls for the 242B5381 or a 621-5361 check valve then this would be the correct part. The latest part number for this is 2006381ZCL.

    Score: 5.00 (votes: 1)
    Reviews: 1
    |
    1
    • $9.40
  • Ball Nut Splined Used- S3

    Single Ball Nut. Fits all Coleman lanterns except the 242 type models.

    Not rated yet
    • $4.60
  • Air Stem Used Old Style - S31

    Air stem older style used. Has the larger head on the end.

    In the 426 stove series, this only fits 426B and C stoves, not 426 or 426A

    Not rated yet
    • $4.90
  • Mixing Chamber New Style Brass - E328

    Newer style mixing chamber for the model 220/228 lanterns. 

    Not rated yet
    • $8.15
  • New Filler Cap Brass - C4

    New brass one piece filler cap. Fits most all lanterns and stoves other than the model 242 lantern and 500 stove. 

    Has gone in the past by part numbers 220C1401, and now 425A1405

    Not rated yet
    • $9.60
  • 220 White Logo USA Globe - G91

    USA made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $21.95
  • 220 Globe White Letter Germany - G90

    German made white logo globe. This globe fits the model 220, 290, 228, 235, and 295. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches.

    Not rated yet
    • $20.90
  • 220 Red Logo Pyrex Globe USA - G28

    This is a US made original globe for models 220, 228, 290, 290A, 295 and 235. This globe measures approximately 5 1/4 inch high and has a diameter of approximately 4 7/8 inches. These are used globes but in very nice shape.

    Not rated yet
    • $26.60
  • Ball Nut Used - S18

    Used ball nut. Fits most Coleman lanterns. Will be in fine shape just not shiny and new.

    Not rated yet
    • $3.00
  • Used Generator Spring - S29

    Used generator spring for 220, 228, 275 lanterns. Also fits some Sears models.

    Will show signs of use but will be in good shape.

    Not rated yet
    • $7.05
  • Pump Clip Used - S17
    • Free Shipping

    Pump Clip Used - S17

    Used pump clip that fits most lanterns and stoves. It is used but in fine shape.

    Not rated yet
    • $1.65
  • Used Generator Nut - S26

    Used generator nut for all the model 200, 242, 243, 220, and 228 models. It is in fine shape, just dirty.

    Not rated yet
    • $2.15
Products: 150 of 67
Show: 50